105_conveyor Accessory Electric Raceway

Transcript

JOB _____________ ITEM # _____________ CONVEYOR ACCESSORY & ELECTRIC RACEWAY Item Numbers NEMA 3R loadcenter Electric Raceways q DXIESORW8 q DXIESORW10 Raceway to be fitted with a removable stainless steel NEMA3R top cover for access to receptacles q DXIESORW12 q DXIESORW14 Receptacles are factory pre-wired to circuit breakers in loadcenter. Each furnished with NEMA3R weather-proof cover. q DXIESORW16 q DXIESORW18 q DXIESORW20 Power connection located Conveyor Accessory thru knock-out panel in bottom of loadcenter. q DXIESOOS (Specify Length) Electric Raceway Options Available At An Additional Cost: 120/1ph 20.0 AMP Single Receptacle (NEMA 5-20R) 120/1ph 30.0 AMP Single Receptacle (NEMA 5-30R) 120/1ph 50.0 AMP Single Receptacle (NEMA 5-50R) 208/1ph 20.0 AMP Single Receptacle (NEMA 6-20R) 208/1ph 30.0 AMP Single Receptacle (NEMA 6-30R) 208/1ph 50.0 AMP Single Receptacle (NEMA 6-50R) 120/208/1ph 20.0 AMP Single Receptacle (NEMA 14-20R) 120/208/1ph 30.0 AMP Single Receptacle (NEMA 14-30R) 120/208/1ph 50.0 AMP Single Receptacle (NEMA 14-50R) 208/3ph 20.0 AMP Single Receptacle (NEMA L15-20R) 208/3ph 30.0 AMP Single Receptacle (NEMA 15-30R) 208/3ph 50.0 AMP Single Receptacle (NEMA 15-50R) 120/208/3ph 20.0 AMP Single Receptacle (NEMA L21-20R) 120/208/3ph 30.0 AMP Single Receptacle (NEMA L21-30R) Hard Wire (J-Box) Connections Pin & Sleeve Receptacle Cord & Plug Assembly to Accommodate Entire Raceway Load. ONLY WHEN ENTIRE RACEWAY LOAD DOES NOT EXCEED 100.0 AMPS. Duplex Receptacles 120/208/1ph 150.0 AMP Loadcenter. PENDING FACTORY APPROVAL 120/208/1ph 200.0 AMP Loadcenter. PENDING FACTORY APPROVAL 120/208/3ph 150.0 AMP Loadcenter. PENDING FACTORY APPROVAL 120/208/3ph 200.0 AMP Loadcenter. PENDING FACTORY APPROVAL We do not accept returns on any Dinex equipment or Dinex custom products. Please contact your local Dinex rep to ensure order accuracy prior to ordering. Note to Customer The model numbers for each loadcenter DO NOT reflect the actual amperage load for the entire raceway. The model numbers note the MAXIMUM capacity for their respective loadcenter. Please consult the factory for the actual amperage load for each raceway. Some options such as voltage & phase of a particular loadcenter may not be available on some conveyors. 4711 E Hefner Road Oklahoma City, OK 73131 800.654.8210 • 405.475.5600 www.dinex.com 105-REV 07/13 CONVEYOR ACCESSORY & ELECTRIC RACEWAY St an s ', l na da rd , 6 dd 5' ', or A 4 f , 3' ory ct a tF itio 18" (46cm) Standard ac nt Co 7' ze Si DXIESOOS (Specify Length) 12" (30cm) Standard 18" (46cm) Standard 1" (3cm) O.D. Stainless Steel tubing shelf uprights Stainless Steel feet to adapt to side edge of conveyor (Shown with optional 2nd tier shelf) Note to Customer When ordering specify the type of conveyor the shelf is to be used with. If shelf is to be used on an existing conveyor, specify size and type of edge stainless steel feet will be adapting to. Items and Dimensions ITEM NUMBER MODEL NUMBER SIZE SHIP WEIGHT DXIESORW8 IESORW8 8 ft. (2.4 meter) section 80 lb. (36kg) DXIESORW10 IESORW10 10 ft. (3.05 meter) section 100 lb. (45kg) DXIESORW12 IESORW12 12 ft. (3.6 meter) section 120 lb. (54kg) DXIESORW14 IESORW14 14 ft. (4.3 meter) section 140 lb. (64kg) DXIESORW16 IESORW16 16 ft. (4.9 meter) section 160 lb. (73kg) DXIESORW18 IESORW18 18 ft. (5.5 meter) section 180 lb. (82kg) DXIESORW20 IESORW20 20 ft. (6.1 meter) section 200 lb. (91kg) DXIESOOS IESOOS — — Please confirm that you have the most current specification sheet by visiting www.dinex.com. Dinex® reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. © 2013 CarlisleFoodService Products Printed in USA 4711 E Hefner Road Oklahoma City, OK 73131 800.654.8210 • 405.475.5600 www.dinex.com 105-REV 07/13