Transcript
Features Features Solid brass construction Solid brass construction
Quarter-turn washerless ceramic disc valve cartridges Features Features Quarter-turn washerless ceramic disc valve cartridges ADA compliant contemporary lever handles Features Solidbrass brassconstruction construction ••Solid ADA compliant contemporary handles Spout assembly with integral lever supply hoses •• Solid brass construction Quarter-turn washerlessceramic ceramicdisc discvalve valvecartridges cartridges • Quarter-turn washerless Spout assembly with integral supply hoses Spring-loaded, normally closed lever handle •• Quarter-turn washerless ceramic disc valve cartridges Spoutassembly assemblywith withintegral integralsupply supplyhoses hoses • Spout Spring-loaded, normally handle 6-3/16" (15.7 cm) spout closed height lever at outlet •• Spout assembly normally with integral supply hoses Spring-loaded, closed leverhandle handle • Spring-loaded, normally closed lever 6-3/16" spout height 4" (10.2(15.7 cm) cm) spout reach (c-c) at outlet •• Spring-loaded, normally closed lever handle 6-3/16" (15.7 cm) spout height outlet • 6-3/16” (15.7 cm) spout height atatoutlet 4" (10.2 cm) spout reach (c-c) 1.5 gallons (5.7 liters) per minute maximum flow rate •• 6-3/16" (15.7 cm) spout height at outlet (10.2cm) cm) (5.7 spout reach (c-c) • 4”4”(10.2 reach (c-c) 1.5 liters) per minute maximum flow rate Forgallons singlespout hole configurations
EAST LINEAR EAST LINEAR Hot and Cold Water Dispenser Faucet Hot and Cold Water Dispenser Faucet EAST LINEAR 106 EAST LINEAR
106 106 106
Hot and Cold Water Dispenser Faucet Hot and Cold Water Dispenser Faucet
•• 4” (10.2 cm)(5.7 spout reach (c-c) liters) per minute maximum Forgallons single configurations • 1 1.5 gallon (3.6 hole liters) per minute maximum flow flow rate*rate •• 1.5 gallons (5.7 configurations liters) per minute maximum flow rate Forsingle singlehole hole • For configurations
Codes / Standards Compliance Codes / Standards Compliance
• For single hole configurations *A Water Dispenser flowfollowing rate of approximately 1 gpm or less is Meets or exceeds the at date of manufacture: typical but will vary depending on installation specific factors ASME A112.18.1/CSA B125.1at date of manufacture: Meets or exceeds thepressure following including in-line water and water filtration system. ASME A112.18.1/CSA B125.1 IAPMO/cUPC
Codes / Standards Compliance IAPMO/cUPC Meets or exceeds the following at date of manufacture: IPC Codes / Standards Compliance Meets or exceeds the following IPC • ASME B125.1 at date of manufacture: NSF A112.18.1/CSA 61 •• ASME A112.18.1/CSA B125.1 NSF 61 ADA IAPMO/cUPC ADA •• IAPMO/cUPC Energy Policy Act of 1992 IPC Energy Policy Act 1992 and State material regulations •• IPC All61 applicable US of Federal NSF All61 applicable US Federal and State material regulations •• NSF Energy Policy Act of 1992
•• Energy Policy Act 1992 and State material regulations All applicable US of Federal • All applicable US Federal and State material regulations
Specified Model
Colors / Finishes Specified Model Model/ Finishes Description Colors
Specified Model 106 Hot and Cold Water Faucet Specified Model 5-036 Point-of-Use Water Dispenser Heater (115V, 140¡F to 190¡ range) 106 Model
Hot and Cold Water Dispenser Faucet Description
Model 5-036 Model 106
Description Point-of-Use Water Heater (115V, 140¡F to 190¡ range) Description Hot and Cold Water Dispenser Faucet
106 5-036
Hot and Cold Water Water Heater Dispenser Faucet 140¡Fto to190° 190¡ range) range) Point-of-Use (115V, 140°
5-036
Point-of-Use Water Heater (115V, 140¡F to 190¡ range)
Colors / Finishes • Colors 10B: Oil Rubbed Bronze Finishes Colors // Finishes • 15: Polished Nickel • Colors 10B: Oil Rubbed Bronze Finishes • 10B: Oil Bronze Colors // Rubbed Finishes • 15S: Satin Nickel
• 15:Oil Polished Nickel • 15: Polished Nickel 10B: Rubbed Bronze 10B: Oil Rubbed Bronze •••26: Polished Chrome 15S: Satin Nickel 15: Polished Nickel • •15S: Satin Nickel 15: Polished Nickel • 26: Polished Chrome 15S: Satin Nickel • •26: Polished Chrome 15S: Satin Nickel • Other: Refer to the Newport Brass catalog for 26: Polished Chrome ••26: Polished Other: Refer toChrome theoptions. Newport Brass additional color/finish • Other: Refer to the Newport Brass catalog for catalog for additional color/finish options. • O•ther: Refer to the Newport Brass catalog Other: color/finish Refer to theoptions. Newport Brass additional for additional color/finish options. catalog for additional color/finish options. • • • •
Colors / Finishes Colors /15S Finishes 15 26 15
15S
26
Colors | Finishes Colors 15S 10B 15 15S 10B | Finishes 15 10B
15
15S
10B
Other
10B
Other
26 26 26
Other Other
Add "Color / Finish" suffix to Model number, below. Product Specification: Add brass "Color / Finish" suffix Model number, below. Product The Hot and ColdSpecification: Water Dispenser Faucet shall be made of solid construction. Faucet to shall incorporate a spout assembly with integral supply hoses and feature quarter-turn washerless ceramic suffix disc valve cartridges. Faucetbelow. shall incorporate ADA compliant Addbe "Color / Finish" to Model number, Product Specification The Hot and Cold Water Dispenser Faucet :shall made of solid brass construction. Faucet shall incorporate a spout assembly with contemporary lever handles and feature a spring-loaded, normally closed hot lever mechanism. Hot and Cold Water Dispenser Faucet integral supply hoses and feature quarter-turn washerless ceramic disc construction. valve cartridges. Faucet shall incorporate ADA compliant Add "Color /ofsolid Finish" suffix to Model number, below. Product Specification :shall Hot and and Cold Water Dispenser Faucet be madeof solid brass Faucet shall incorporate a Product spout assembly with Theshall Hot Cold Dispenser Faucet shall be made brass construction. Faucet incorporate a spout assembly with integral have a 1.5Water gallons (5.7 liters) per minute maximum flow rate and accommodate singleshall hole configurations. shall incorporate
contemporary lever handles and feature a spring-loaded, normally closed hot lever mechanism. Hot andincorporate Cold Water Dispenser Faucet integral supply hoses andquarter-turn feature quarter-turn washerless ceramic disc valve cartridges. Faucet shall contemporary leverand supply hoses and feature washerless ceramic disc valve cartridges. Faucet shall incorporate contemporary lever handles aHot 6-3/16" (15.7 cm) spout heightFaucet at outlet andbe a 4" (10.2 cm) spout reach (c-c). Hot and Cold Water Dispenser shall be Newport The and Cold Dispenser shall made offlow solid brass construction. Faucet shall incorporate aFaucet spout assembly shall have a 1.5Water gallons (5.7 liters) per minute maximum rate accommodate single hole configurations. Product shall incorporate handles feature a spring-loaded, normally closed hot lever mechanism. andDispenser Cold Water Dispenser Faucet shall have a with 1.5 gallons feature aand spring-loaded, normally closed hot lever mechanism. Hotand and ColdHot Water Faucet shall have a1 gallon (3.6 liters) per integral supply hoses and feature quarter-turn washerless valve cartridges. shall incorporate contemporary lever Brass Model 106/____ . [Point-of-Use Water Heater shall ceramic be Newport Brass Model 5-036].Faucet (5.7 liters) per minute maximum flow rate and accommodate singledisc hole configurations. Product ashall 6-3/16" minute maximum flowspout rate height and accommodate single hole configurations. Product shall incorporate a incorporate 6-3/16” (15.7 cm)bespout height at a 6-3/16" (15.7 cm) at outlet and a 4" (10.2 cm) spout reach (c-c). Hot and Cold Watershall Dispenser Faucet Newport handles and feature a spring-loaded, normally closed hot lever mechanism. Hot and Cold Water Dispenser Faucet shall have a 1.5 gallons (15.7 cm) spout height at. spout outlet and a (c-c). 4" (10.2 cm) reach (c-c).Brass Hot and Cold Water Faucet shall106/____ be Newport Brass Model outlet and a 4”106/____ (10.2 cm) reach Hot andspout Cold Dispenser Faucet shall be Dispenser Newport Brass Model . [Point-of-Use Brass [Point-of-Use Water Heater shall Water be Newport Model 5-036]. page 1Model ofper spec_ 949.417.5207 | www.newportbrass.com 106 (5.7 liters) minute maximum flow rate andbe accommodate single hole configurations. Product t: shall incorporate a 6-3/16" 106/____ . 2[Point-of-Use Water Heater shall Newport Brass Model 5-036]. Water Heater shall be Newport Brass Model 5-036]. (15.7 cm) spout height at outlet and a 4" (10.2 cm) spout reach (c-c). Hot and Cold Water Dispenser Faucet shall be Newport Brass Model ©2012 Brasstech, Inc. page 1 of. 2[Point-of-Use spec_ Water t: 949.417.5207 | www.newportbrass.com 106 106/____ Heater shall be Newport Brass Model 5-036]. ©2012 Brasstech, Inc.
Page 11 of Page of 22 Spec_106_d_6/15 Spec_106_rev-b 08.13 Page 1 of 2 Spec_106_rev-b 08.13
t:t:949.417.5207 949.417.5207 l l www.newportbrass.com www.newportbrass.com ©2013 ©2015Brasstech, Brasstech,Inc. Inc. t: 949.417.5207 l www.newportbrass.com ©2013 Brasstech, Inc.
106 Product Dimensions
(units are in inches)
East Linear Hot and Cold Water Dispenser Faucet
106
Page 2 of 2 Page 2 2 of of 2 2 page
Spec_106_d_6/15 Spec_106_rev-b 08.13 spec_ 106
t:t: 949.417.5207 www.newportbrass.com t:949.417.5207 949.417.5207 l|l www.newportbrass.com www.newportbrass.com ©2013 Brasstech, ©2015 Brasstech, Inc. ©2012 Brasstech,Inc. Inc.
