Transcript
10GbE SFP+ Passive DAC Cable
Overview The SFP+ Passive DAC cable is a highperformance, cost effective I/O solutions for 10Gb Ethernet and 10G Fiber Channel applications. SFP+ Passive DAC cable enables hardware manufacturers and data center operators to achieve high port density, configurability and utilization at a very low cost and with reduced power requirements. These high-speed DAC cables meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fiber Channel industry standards. They are compliant with the SFP+ MSA specifications.
Features & Benefits • Support Serial Data Rates up to 10Gbps • Support 1x, 2x, 4x and 8x Fiber Channel Data Rates • Hot-Pluggable SFP 20PIN Footprint • 24AWG - 30AWG Cable • Low Power Consumption • EMI/EMC Performance
Applications • 10GbE Ethernet 10GBASE-T • Storage Area Networks( SAN) • 1G/2G/4G/8G Fiber Channel • Data Center Cabling Infrastructure • High Density Connections • Switched Fabric I/O (Ultra High Bandwidth Switches & Routers)
Cable Diagram
10GbE SFP+ Passive DAC Cable Table 1 - Absolute Maximum Ratings Parameter
Range
Operating Voltage
6V
Operating Case Temperature
-40 oC to +85 oC
Storage Ambient Temperature
-40 oC to +85 oC
Table 2 - Operating Conditions Parameter
Minimum
Typical
Maximum
Units
Supply Voltage
3.13
3.3
5.25
V
Data Rate per Lane
1
10
Gb/s
Table 3 - Physical Data Parameter
30AWG
24AWG
Units
Cable Diameter
4.5
6.5
mm
Bend Radius, Minimum Sustained Bend
22.5
32.5
mm
Standards Compliance • Electrical: SFF-8431, SFF-8083 • Mechanical: SFF-8432 • EEPROM: SFF-8472 • SFP+ MSA • RoHS
Product Selection Part Number: 75-S010-XX xx
Length
AWG
1M
1 meter cable
30
2M
2 meter cable
30
3M
3 meter cable
30
4M
4 meter cable
24
5M
5 meter cable
24
6M
6 meter cable
24
7M
7 meter cable
24
Custom Cable Lengths and Colors also Available
Innovate • Design • Manufacture | Silicon Valley • Shenzhen • Tel Aviv • Singapore • Ireland wave-2-wave.com | © Wave2Wave Solution Corporation. All rights reserved. v.080615
40GbE QSFP+ Passive DAC Cable
Overview The QSFP+ Passive DAC Cable is designed for high-density applications that integrate 4 InfiniBand channels at 10 Gbps per lane. This passive DAC cable offers a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. The QSFP+ Passive DAC Cable is used for 40GbE and Infiniband standards. To maximize performance, the QSFP+ DAC cable is designed to meet emerging data center and high performance computing application needs. This cable is a high density cabling interconnect system capable of delivering an aggregate data bandwidth of 40Gbps. The QSFP+ Passive DAC Cable is fully compliant to existing industry standard specifications such as the QSFP+ MSA and IBTA (InfiniBand Trade Association). The QSFP+ cable supports the bandwidth transmission requirements as defined by IEEE 802.3ba (40 Gbps) and Infiniband QDR (4x10Gb/s per channel) specifications.
Features & Benefits • Support Serial Data Rates up to 40Gbps • Ultra Low Crosstalk for Enhanced Performance • 3x the Port Density of Standard SFP Products - Save Rack Space and Power • 24AWG - 30AWG Cable • Low Power Consumption
Cable Diagram
Applications • Enterprise Storage • High Density, High Speed I/O • Multiple Channel Interconnects • Switches, Routers, and HBA’s • Data Center Networking • InfiniBand 4x SDR, DDR, QDR
40GbE QSFP+ Passive DAC Cable Table 1 - Absolute Maximum Ratings Parameter
Range
Operating Voltage
6V
Operating Case Temperature
-40 oC to +85 oC
Storage Ambient Temperature
-40 oC to +85 oC
Table 2 - Operating Conditions Parameter
Minimum
Typical
Maximum
Supply Voltage
3.13
3.3
3.465
Data Rate per Lane
1
10
Units V Gb/s
Table 3 - Physical Data Parameter
30AWG
24AWG
Units
Cable Diameter
6.6
10
mm
Bend Radius, Minimum Sustained Bend
35
50
mm
Standards Compliance • Electrical: IBTA V2 Revision 1.2.1 • IEEE 802.3ba • EEPROM: SFF-8436 • QSFP+ MSA • RoHS
Product Selection Part Number: 75-Q010-XX xx
Length
AWG
1M
1 meter cable
30
2M
2 meter cable
30
3M
3 meter cable
30
4M
4 meter cable
24
5M
5 meter cable
24
6M
6 meter cable
24
7M
7 meter cable
24
Custom Cable Lengths and Colors also Available
Innovate • Design • Manufacture | Silicon Valley • Shenzhen • Tel Aviv • Singapore • Ireland wave-2-wave.com | © Wave2Wave Solution Corporation. All rights reserved. v.080615
25GbE SFP28 Direct Attach Passive Copper Cables
Overview The SFP28 passive cable assemblies are high performance, cost effective I/O solutions for 25G Ethernet. SFP28 copper cables allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget.
Features & Benefits
Applications
• • • •
Up to 25Gbp/s data rate Up to 5 meter transmission Hot-pluggable SFP 20PIN footprint Improved Pluggable Form Factor(IPF) compliant for enhanced EMI/EMC performance • Compatible to SFP28 MSA • Compatible to SFF-8402 and SFF-8431 • Temperature Range: 0~ 70 °C
• 25GbE • Fiber Channel over Ethernet • Data storage and communication industry • Switch / router / HBA • Enterprise network • SAN • Data Center Network
Specifications Recommended Operating Conditions Parameter
Symbol
Storage Ambient Temperature Operating Case Temperature Power Supply Voltage Data Rate Per Lane
Min
Typical
Max
Unit
-40
+85
ºC
Tc
0
+70
ºC
Vcc3
3.14
3.47
V
25.78
Gb/s
1
3.3
25GbE SFP28 Direct Attach Passive Copper Cables
Specifications Mechanical Diagram
Specifications Product Selection Part Number: 75-Z0101-XX
XX
Length
AWG
1M
1 meter cable
30
2M
2 meter cable
30
3M
3 meter cable
30
4M
4 meter cable
24
5M
5 meter cable
24
Custom Cable Lengths and Colors also Available
Standards Compliance • IEEE P802.3by • SFF-8402 • SFF-8431 • SFP28 MSA • RoHS
Innovate • Design • Engineer • Manufacture | SF/Bay Area • Dublin • Shenzhen • Tel Aviv • Hong Kong wave-2-wave.com | © Wave2Wave Solution Corporation. All rights reserved. v.081016
100GbE QSFP28 Direct Attach Cable
Overview The 100GbE QSFP28 cable assemblies are high performance, cost effective I/O solutions for High Performance Computing (HPC) and Storage Area Network (SAN). The high speed cable assemblies meet and exceed 100 Gigabit Ethernet, InfiniBand EDR and temperature requirements for performance and reliability. The cables are compliant with SFF-8665 specifications and provide connectivity between devices using QSFP ports.
Features & Benefits
Applications
• QSFP28 conforms to the Small Form Factor SFF-8665 • 4-Channel Full-Duplex Passive Copper Cable Transceiver • Support data rates: 25Gbp/s (per channel) • Maximum aggregate data rate: 100Gbp/s (4 x 25Gbp/s) • IEEE 802.3bj 100GEBASE-CR4 • Copper link length up to 3m • Power Supply: +3.3V • Low crosstalk • I2C based two-wire serial interface for EEPROM signature which can be customized • Operating Temperature: 0~ 70 °C
• 100GbE • Fiber Channel over Ethernet • Data storage and communication industry • Switch / router / HBA • Enterprise network • SAN • Data Center Network
Specifications Recommended Operating Conditions Parameter
Symbol
Max
Unit
-40
+85
ºC
Tc
0
+70
ºC
Vcc3
3.14
3.47
V
25.78
Gb/s
Storage Ambient Temperature Operating Case Temperature Power Supply Voltage Data Rate Per Lane
Min
1
Typical
3.3
100GbE QSFP28 Direct Attach Cable
Specifications Mechanical Diagram
Product Selection Part Number: 75-Z0401-XX
XX
Length
AWG
1M
1 meter cable
30
2M
2 meter cable
30
3M
3 meter cable
30
4M
4 meter cable
24
5M
5 meter cable
24
Custom Cable Lengths and Colors also Available
Standards Compliance • IEEE 802.3bj • InfiniBand EDR • SFF-8436 • SFF-8665 • QSFP28 MSA • RoHS
Innovate • Design • Engineer • Manufacture | SF/Bay Area • Dublin • Shenzhen • Tel Aviv • Hong Kong wave-2-wave.com | © Wave2Wave Solution Corporation. All rights reserved. v.081016
