10” Dual Dj Speakers With Tripod Stands

Transcript

10” Dual DJ Speakers with Tripod Stands Model Number: ADS10-014 INSTRUCTION MANUAL www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 Welcome Congratulations on choosing to buy a BAUHN® product. All products brought to you by BAUHN® are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty. We hope you will enjoy using your purchase for many years to come. ii www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 10” Dual DJ Speakers with Tripod Stands Warranty Details The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refundedat our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failuredoes not amount to a major failure.  www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 iii Contents iv Welcome ii Warranty Details iii General Safety Instructions 1 Product Overview 3 Getting Started 6 Instructions 9 Other Useful Information 12 Repair and Refurbished Goods or Parts Notice 15 www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 General Safety Instructions Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Follow all instructions and take notice of all warnings to reduce the risk of fire or electric shock. Important Warnings and Cautions! Do not attempt to open the cover or back. There are no user-serviceable parts inside the equipment. Do not attempt to repair, disassemble or modify the equipment yourself. Only have it serviced by qualified personnel. In case of damage, call our after sales support line for advice. Do not expose this equipment to water, rain or moisture. Do not immerse it water. Do not use it near water or where water splashes or drips. Do not touch the power plug with wet hands. Electrical Safety and Cord Handling • Voltage: Before installing the speakers, make sure your outlet voltage and circuit frequency correspond to the voltage stated on the product rating label and the outlet socket is properly earthed and readily accessible. • Electrical circuit: Do not overload wall outlets, extension cords, or power boards as this can result in a risk of fire of electric shock. • Protect the power cord: Do not kink, bend, strain or damage the supply cord and protect it from sharp edges and heat. Do not run the cord near heat-producing appliances such as radiators, stoves or irons. The excessive heat could melt the insulation and expose live wires. • Cord connection: Run the cord in such a way that there will be no risk of anyone pulling it inadvertently, tripping over it or stepping on it. Make sure nothing is placed upon or against the cord. • Damaged cord: If the supply cord is damaged, contact our after sales support centre. A damaged cord must be replaced by qualified personnel in order to avoid a hazard. • Disconnect: Make sure the power cord is disconnected from the wall outlet before connecting the speakers and if they are not going to be used for a while. When disconnecting, always grip the plug, do not pull on the cord. www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 1 General Safety Instructions (Cont.) Usage Conditions and Restrictions • Installation: Before installing this equipment, read this manual thoroughly and make sure you understand all instructions and safety warnings. • Placement: Once the speakers are properly installed on their tripod stands, place them on a straight, rigid and stable surface. Do not stack the speaker cabinets in a way that they could cause injury if they topple over. • Protect from heat: Do not place the speakers near sources of heat such as radiators, stoves or other appliances that produce heat. Do not place lightning equipment or smoke machines on top of the speakers. • Prevent damage: Do not place the product near other items that may damage it, such as naked flame sources (lit candles) or objects containing water (a vase). Take care that no objects fall into, or are pushed into, and that no liquids are spilled into any openings or vents. • Dusting only: Clean the speakers only with a soft, dry cloth. Do not use chemical cleaning agents on any part of the equipment. • Usage restriction: This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. • Children: Supervise young children to ensure they do not play with the product. Children may not comprehend the presence of potential risks. • Safe and appropriate usage: Only use this equipment in accordance with the instructions in this manual. We assume no liability for any eventual damages caused by misuse of the equipment or noncompliance with these instructions. 2 www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 Product Overview 1 Speaker and grille 2 Height-adjustable stand pole 3 Pole height adjustment knob 4 Height-fixing pin 5 Leg angle adjustment knob 6 Tripod legs 7 Slip-resistant feet 1 2 3 4 5 6 7 www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 3 Product Overview (Cont.) 17 18 8 19 9 10 11 12 13 14 15 16 20 21 22 23 24 25 26 27 28 4 www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 Product Overview (Cont.) 8 SD Card Slot: Insert the SD card. 9 AUX Volume: Volume control for the line input. 10 MIC/Line Volume: Volume control for the microphone or line input. 11 6.35mm Jack: Jack for microphone input. 12 Line/MIC Switch: Press in to control the microphone input; release to control the line input. 13 AUX: 3.5mm device input connector (for mobile phone, tablet, computer, etc.). 14 MIC/Line Input: XLR connector for microphone or DJ gear. 15 R Line Input: Right channel RCA device input connector (for CD, tuner, mixer, etc.). 16 L Line Input: Left channel RCA device input connector (for CD, tuner, mixer, etc.). 17 LED Display 18 USB Input: Insert your USB stick. 19 Player Control Panel MODE Select USB, SD Card or Bluetooth Wireless Source Play/Pause Repeat Last Track Next Track 20 Equaliser: High frequency tone level control from -12dB to +12dB. 21 Power LED: Illuminates when connected to power. 22 Clip LED: Illuminates when the applied input signal reaches distortion; reduce the input level to eliminate the distortion. 23 Equaliser: Low frequency tone level control from -12dB to +12dB. 24 Mix Output: XLR line out to another active speaker. 25 MP3 Volume: Volume control for the MP3 player. 26 Speaker Output: Connect to the other, passive speaker. 27 Main Supply Inlet: Connector for the supplied power cable. 28 Power Switch: Press to switch power on or off. www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 5 Getting Started Unpacking • Carefully take the parts of your new 10” Dual DJ Speakers with Tripod Stands out of the box. Remove any promotional and packaging material but do not remove any labels or stickers on the rear of the unit. • Keep all packaging materials until you have made sure your new equipment is undamaged and in good working order. Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all packaging materials are out of their reach. • Check and make sure all the items listed below are included in your package before setting up the unit: 1x Active Speaker 1x Passive Speaker 2x Tripods 1x Speaker Cable 1x Power Cable You should also have a Getting Started Guide, Warranty Certificate and this Instruction Manual. If there are any items missing, contact our after sales support centre for advice. • Unwind the supply cord to its full length and inspect it for damage. Do not use the unit if any part is damaged. In case of damage, contact our after sales support centre. • Read this manual carefully to familiarise yourself with all the parts and operating principles of the equipment. Pay particular attention to the safety instructions on the previous pages. 6 www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 Getting Started (Cont.) Assembly • Turn the leg angle adjustment knob anticlockwise to loosen (Fig.1), then pull out the tripod legs until they are fully extended (Fig.2). Fig.1 Fig.2 • Insert the centre pole into the opening at the top of the tripod. At the desired height, insert the height-fixing pin into the closest hole above the knob (Fig.3). Fig.3 • Turn the pole height adjustment knob clockwise to tighten (Fig.4). Fig.4 www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 7 Getting Started (Cont.) • Turn the knob at the bottom of the speaker cabinet in an anticlockwise direction until the screw no longer obstructs the opening (Fig.5). • Carefully place the speaker cabinet on top of the pole and tighten the knob (Fig.6). Fig.5 Fig.6 • Follow the same procedure for assembling the second speaker. • Connect the active and passive speakers with the supplied speaker cable, using the speaker output sockets at the back of the speakers (Fig.7). • Your new DJ speakers are now fully assembled and connected. Fig.7 8 www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 Instructions Power Supply This unit works on normal household AC power. Before operating, make sure your local AC voltage supply falls within the product’s voltage range. • Plug the supplied power cable into the mains supply inlet at the back of the active speaker, then insert the plug into a wall outlet and switch the power on at the outlet. • Press the POWER switch at the back of the active speaker to switch on the speakers. Streaming Audio via Bluetooth® Wireless Technology Pairing With a New Bluetooth Enabled Device • Press the MODE button repeatedly on the Player Control Panel at the back of the active speaker until Bluetooth mode is selected. On the LED display the icon will start flashing fast. The DJ Speakers are now ready for pairing. • Turn on the Bluetooth function of your device and scan available Bluetooth enabled devices nearby. • Select “ADS10-014” from the device list to pair. Enter ‘0000’ if your Bluetooth enabled device prompts you for a passcode. • If pairing is successful, a beep will sound and the Bluetooth icon on the LED display will flash slowly. • If you cannot pair the speakers with your Bluetooth enabled device, turn both the DJ Speakers and your Bluetooth enabled device off and on and then try again. • If you want to pair the DJ Speakers with another Bluetooth enabled device, press and hold the button on the Player Control Panel controls at the back of the active speaker. The LED display will show “del” and it will disconnect the current Bluetooth connection and the DJ Speakers become ready for pairing again. Connecting to Bluetooth Devices Stored in Memory • Turn on the DJ Speakers and press the MODE button to select Bluetooth mode. The DJ Speakers will start searching for the previously paired devices. If an available device is found, the speakers will be connected to the Bluetooth device automatically. www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 9 Instructions (Cont.) Playing Audio via Bluetooth Wireless Technology After successful connection you can play music from your Bluetooth enabled device wirelessly through the DJ Speakers. • Press the button to play or pause music. • Press the or button to skip to the previous or next track. NOTE: • Refer to the manual of your Bluetooth enabled device for more information about the Bluetooth function on the device. • If your Bluetooth enabled device does not support A2DP profile, it can be paired and connected but will not play audio through the DJ Speakers. • When you pair and connect your computer to the DJ Speakers, you may need to change the sound setting on your computer. AUX Input Operation This unit is equipped with 4 input sockets for playback of audio from external devices: 3.5mm input socket, stereo RCA socket, 6.35mm input socket for microphone or line input, and XLR input for DJ gear. • If your audio device has a 3.5mm audio output socket (line-out or headphones), use the 3.5mm audio cable to connect the DJ Speakers and your device. • If your audio device has RCA output sockets, use RCA cables to connect the DJ Speakers and your device. • Turn on both the DJ Speakers and the external audio device. • Adjust the volume according to the source you use. NOTE: W  ith the DJ Speakers you are able to combine sound from different sources and play back the audio at once. USB and SD Card Operation This unit has a USB port and SD Card slot on the control panel at the back of the active speaker. The ports accept standard USB drives and SD cards for playback of MP3 files stored on them. • Press the MODE button repeatedly until USB or SD Card mode is selected. • Insert your USB device into the USB port (or the SD card into the card slot) and the unit will start playing automatically. • Press the or button to select the previous or next track. 10 www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 Instructions (Cont.) • Press the button to temporarily pause the track. • Press the button to repeat the current track, repeat all tracks, or shuffle tracks for playback. NOTE: W  hen you insert a USB device or an SD card, the DJ Speakers will automatically select the appropriate mode and start playing. When you have both a USB device and an SD card inserted, you will have to press the MODE button repeatedly until the appropriate source is selected. FM Radio Operation • Press the MODE button repeatedly until FM radio source is selected. The radio station’s frequency number will show on the LED display. • To manually tune into a radio station, use the or button. Use the manual tuning method to tune into stations with weak signals. They may be bypassed during the automatic tuning process. • To automatically tune into the next/previous available radio station, press and hold the button for 3-5 seconds until the unit starts searching. The unit will start auto-tuning and save stations with adequate signal strength. NOTE: • The unit has a built-in FM antenna towards the back of the unit. For the best reception, position the speaker with the back towards a window. • Automatic tuning depends on the signal strength of radio stations. Stations with a weak signal may be skipped during auto-tuning. You can manually tune in to those stations. Preset Radio Stations The DJ Speakers have 34 preset memories for FM radio stations. • To set preset memories automatically, press and hold the button for 4~5 seconds to activate auto preset mode. The unit will search for available stations and will store up to 34 available stations automatically, depending on the signal strength. Recalling Preset Memory Channels • To recall a preset station, press the the active speaker. or button on the back panel of www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 11 Other Useful Information Cleaning and Maintenance CAUTION! • To prevent a fire or shock hazard, disconnect the DJ Speakers from the AC power supply before cleaning. • Never allow any water or other liquid to get inside the DJ Speakers while cleaning. • The speaker cabinets should be cleaned with a soft, dry dust cloth. • DO NOT use any of the following substances for cleaning the speaker cabinets or tripods: NO wax or polish sprays NO abrasive cloths or polishes NO chemical cleaning agents • DO NOT remove the cover or the back of this equipment. There are no user-serviceable parts inside. • DO NOT attempt to repair or service the equipment. All servicing should be referred to qualified service personnel. Contact our after sales support centre for advice on repair or service. 12 www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 Other Useful Information (Cont.) Technical Specifications Model 10” Dual DJ Speakers with Tripod Stands Model Number ADS10-014 Output Power 100RMS Sensitivity 93dB±2dB Frequency Response 40Hz - 20kHz USB Playback Yes SD Card Playback Yes Bluetooth V2.0 +EDR, with A2DP and L2CAP Auxiliary Inputs 1x XLR, 1x RCA, 1x 3.5mm, 1x 6.35mm Auxiliary Output 1x XLR Responsible disposal At the end of its working life, do not throw this equipment out with your household rubbish. Electrical and electronic products contain dangerous substances that can have a detrimental effect on the environment and human health if disposed of inappropriately. Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it appropriately for recycling. Contact your local authorities for advice on recycling facilities in your area. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners. www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 13 This page has been left blank intentionally. 14 www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 10” Dual DJ Speakers with Tripod Stands Repair and Refurbished Goods or Parts Notice Unfortunately, from time to time, faulty products are manufactured which need to be returned to the supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair. You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process. Please be assured though, refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 886 649 or write to us at: Tempo (Aust) Pty Ltd ABN 70 106 100 252 PO BOX 6056 Frenchs Forest, Sydney, Australia NSW 2086 Tempo Help Desk: 1300 886 649 (Aust) (Operating Hours: Mon-Fri 08:30AM to 06:00PM EST) Email: [email protected] www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015 15 Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on 1300 886 649 before returning it to the store for a refund. www.tempo.org AUS 1300 886 649 Model: ADS10-014 Product Code: 47398 10/2015