Transcript
IRK SERIES INTELLIGENT REDUNDANT KIT SERIES 1:1 60W TO 200W KU-BAND BUC/SSPA REDUNDANT SYSTEM OVERVIEW
KEY FEATURES
The new IRT Technologies IRK Series (Intelligent Redundant Kit) is light weight and super-compact due to revolutionary small size IRT BUCs equipped with intelligent built in redundancy function. IRK series does not use an external redundancy controller; means there is no single point failure in the redundant system and its reliability is much higher. IRK series features extensive monitor & control via serial ports EIA232/EIA485 and Ethernet. The state of the art web browser provides the operator with comprehensive system management tool. Power Distribution Unit (PDU) makes power connection extremely simple and convenient for the user - only one power entry cable for the system. IRK series enable unprecedented system performance, simplicity and reliability.
Eliminates external redundancy controller as a single point failure for the system Input splitter provides 10MHz reference to both BUCs simultaneously - real hot standby mode for the case of external reference. Easy BUC/PA unit’s replacement without interruption of traffic Remote control over RS-232, RS-485 and Ethernet. Built-in SNMP and web server Auto manual, remote, manual override operational modes BUC A/B Gain equalization feature Manual Switch-Over button Power distribution junction box (optional) Indoor 1RU remote control unit (optional) Internal 10MHz reference option
Power Entry
PDU BUC A
SPLITTER L-Band Input / 10MHz
Protection Interconnect I/F
Remote M&C I/F
Monitor & Control & #1
WAVEGUIDE SWITCH TERMINATION
Monitor & Control & #2
BUC B
Rr
800 Boulevard Saint-Jose La Prairie, QC Canada J5R 6W9 +1-450-444-1227 www.irttechnologies.com
Canada (Headquarters)
[email protected]
Europe
[email protected]
USA
[email protected]
Asia Pacific
[email protected]
CONNECTING THE WORLD TOGETHER
RF Output
IRK SERIES 60W TO 200W KU-BAND BUC/SSPA 1:1 REDUNDANT SYSTEM IF/RF CHARACTERISTICS IF Frequency Range: RF Frequency Return Loss at IF In Port Return Loss at RF Out Port Output Power Input IF port Impedance
950-1700MHz 13.75-14.5GHz -14dB max -16dB max Up to 200W at Psat 50 Ohm
EXTERNAL REFERENCE Frequency Int./Ext. Autosense Interface Phase Noise @ 10Hz @ 100Hz @ 1kHz Power Level
10MHz Int. clock locks on external reference Multiplexed with IF -150dBc/Hz -130dBc/Hz -140dBc/Hz 0dBm +/-5dBm
POWER AC Option DC Option (60-100W only)
90-265VAC 50-60Hz to each BUC/SSPA 36-55 VDC Isolated to each BUC/SSPA
INTERFACES IF IN (L-Band and 10MHz ) RF Out User Interface
N-type female WR75 Grooved MS3112E14-19S
MONITOR & CONTROL FEATURES Controls: Remote/Local Online/Stand By Toggle Auto/Manual Toggle Mute Control Gain Control Clear Alarm LO Select Manual Switch-Over
Indicators: Remote/Local Indication Active/Stand by status Mute Status Switch Position Gain Status Temperature BUC 1-2 Lock status BUC1-2
Via Serial, Ethernet Via Serial, Ethernet Via Serial, Ethernet Via Serial, Ethernet Via Serial, Ethernet Via Serial, Ethernet Via Serial, Ethernet Nob on redundancy switch
Via Serial, Ethernet Via Serial, Ethernet Via Serial, Ethernet Via Serial, Ethernet, LED Via Serial, Ethernet Via Serial, Ethernet Via Serial, Ethernet
Summary Alarm status 1-2
Via Serial, Ethernet
Output Power Detection
Via Serial, Ethernet
MECHANICAL Size 60W to 100W Size 150W to 200W Weight 60W to 100W Weight 150W to 200W Finish ENVIRONMENTAL Operating temperature Storage Temperature
22.85" x 25" x 5.2” 22" x 32" x 7” 38 lbs 67 lbs Painted white -40 to +55 deg.C -40 to +85 deg.C
IRT PART NUMBER IRK-KXBXXX-HMXX Contact IRT for detailed configuration number
*Specifications are subject to change without prior notice
Rev.04
Rr
800 Boulevard Saint-Jose La Prairie, QC Canada J5R 6W9 +1-450-444-1227 www.irttechnologies.com
Canada (Headquarters)
[email protected]
Europe
[email protected]
USA
[email protected]
Asia Pacific
[email protected]
CONNECTING THE WORLD TOGETHER
