Transcript
1100-WATT 12-INCH 2-WAY POWERED LOUDSPEAKER ACCURACY. POWER. PORTABILITY. AFFORDABILITY. These are the cornerstones of TRUESONIC speakers, which provide exceptionally transparent sound for musicians and live sound engineers alike. TRUESONIC speakers enlist their ultra-pure signal path, super-efficient driver design, and durable, lightweight polypropylene enclosures to deliver precise reproduction of deep lows, crystal-clear high end and smooth mid-range. With TRUESONIC speakers, what you put in is exactly what you get out.
TRUESONIC TS212
SPECIFICATIONS
The TS212 was designed with versatility and longevity in mind. The TS212’s trapezoidal design greatly decreases the resonance of the standing wave in the cabinet, producing a truer and more exact sound reproduction. This durable, lightweight enclosure is stand-mountable for weekend gigs and flyable for more permanent installations. Both the 12” low-frequency and 1” high-frequency drivers in the TS212 are designed to be super-efficient. This translates into more of the power from your amplifier actually working to generate sound rather than heat. Inside and out, every component of the TS212 was developed to provide accurate, transparent, powerful sound.
Output Power
1100W peak (700 LF + 400 HF) 550W continuous RMS (350 LF + 200 HF)
Low Frequency
12” (300mm) woofer, 2.5” (64mm) voice coil
High Frequency
1” (25mm) neodymium driver with precision waveguide
Crossover
2kHz
FEATURES
Maximum SPL
127dB peak, 124dB continuous (dB SPL @ 1m)
• • • • •
Frequency Response 53Hz–20kHz (+/-3dB)
• • • • • • • •
550W continuous, 1100W peak Class D power 12-inch (300mm) LF driver, 2.5-inch (64mm) high-temperature voice coil 1-inch (25mm) neodymium driver with precision waveguide Bi-amplified design with precision active crossover and EQ Integrated 2-channel mixer with dual XLR+¼-inch combo mic/line inputs and independent level controls XLR Mix output Ground-Lift switch Contour switch for increased EQ control Electronic clip, thermal and transducer overdrive protection Compact, lightweight, trapezoidal cabinet design for easy transport and installation Angled rear panel for wedge monitor applications Stand- and pole-mountable with integral M10 suspension points Designed and tuned in the USA
Frequency Range
46Hz–22 kHz(-10dB)
Coverage
90° H x 60° V nominal
Connectors
(2) XLR+¼-inch combo jack mic/line inputs (1) XLR Mix Output
Cabinet
Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Controls
Volume, power on/off with LED, clip limiter with LED, ground lift
Protection
Electronic clip, thermal and transducer overdrive protection
Power
AC Input: 100–120/220–240V, 50/60Hz
Dimensions (HxWxD)
23.3” x 14.1” x 13.8” (591 x 357 x 351mm)
Weight
28.4 lbs / 12.9 kg
FOR MORE INFORMATION, PLEASE VISIT ALTOPROFESSIONAL.COM
1100-WATT 12-INCH 2-WAY POWERED LOUDSPEAKER
FREQUENCY RESPONSE
CONTROLS / INPUTS
110
100
dB SPL
90
80
70
60
20
100
100 0
1 00 00
20000
Frequency (Hz)
BLOCK DIAGRAM
200W
350W
FOR MORE INFORMATION, PLEASE VISIT ALTOPROFESSIONAL.COM
