1100acs-32/1200acs-32 Announcement Control System Product

Transcript

1502AO GLOBALCOM SmartLink OutX2 Output Module Description Specifications The SmartLink OutX2 CobraNet Audio Output Interface is a cost effective two output line level wall box or DIN Rail mountable device. The OutX2 features two balanced outputs. The OutX2 is designed to fit into most dual gang junction boxes or DIN Rail 3 (35mm) applications and is PoE enabled, so all connectivity (both power and audio data) to the OutX2 is provided by a single CAT-5 cable. Each output can be configured as an individual zone to feed announcements to other systems. Electrical Output Type............................... Balanced (can be wired as unbalanced) Output Impedance............................ 200 Ω balanced, 100 Ω unbalanced Maximum Output Level (balanced)............................................. +10 dBu Maximum Output Level (unbalanced)........................................... +4 dBu Noise..............................................................................................–83 dBu Frequency Response.........................20Hz – 20kHz, ±1dB (100 kΩ load) System THD..............................<0.05%, 1kHz, 3dB below DAC full scale Device Power......................................Class 2 802.3af PoE PD Compliant PoE Power Consumption......................................................................4W Features • Two balanced female XLR output connectors • Mounts in a standard dual gang junction box or DIN Rail 3 • Powered by a standard PoE network switch • Outputs are programmed as system zones to be used to route announcements to other systems Innovative Electronic Designs, LLC 9701 Taylorsville Road Louisville, KY 40299, USA Connectors Outputs (2).............................................non-latched male XLR connector Network...............................................................................................RJ45 Mechanical Height................................................................................... 2.75” (7.0 cm) Width.................................................................................... 3.60” (9.2 cm) Depth.................................................................................... 1.88” (4.8 cm) Recommended Minimum Mounting Depth......................... 2.50” (6.4 cm) Mounting.............Standard 2-gang low-voltage mounting bracket or box Environmental Operating Temperature Range.......... +32 ˚F – +104 ˚F (0 ˚C – +40 ˚C) Storage Temperature Range..............-4 ˚F – +158 ˚F (-20 ˚C – +70 ˚C) +1.502.267.7436 phone +1.502.267.9070 fax www.iedaudio.com ©2011 Innovative Electronic Designs LLC. All Rights Reserved. IED, 500ACS, and 500ACS Announcement Control System are Registered Trademarks of Innovative Electronic Designs LLC. Atlas Sound is a Registered Trademark of Atlas Sound L.P. CobraNet is a trademark of Cirrus Logic. All other trademarks are the property of their respective owners and no endorsement is implied. Due to continual product development, specifications are subject to change without notice. DOC: 1206A REV: 04-11