Preview only show first 10 pages with watermark. For full document please download

1104 Blade - Atea Lighting

   EMBED

Share

Transcript

INSTALLATION INSTRUCTIONS 1104 BLADE 2 *T UR N OF F MAINS P OWE R WHE N WIR ING !* Cable exits through here Mount brackets to wall at desired spacing on the correct side, ensure hole is present for cable exit. 3 Fix bracket clamps along fitting to match bracket spacing using self-tapping screw provided. 4 WARNING - ONLY TO BE INSTALLED BY A QUALIFIED ELECTRICIAN Do not fully tighten screws Slot bracket clamps over bracket and fix in place using the screw and threaded sleeve provided. High Intensity Light Source! Do not stare into the beam! 5 Feed the cable through the hole in the wall drilled in step one and push the cable into the slot in the bracket to hide it from view. 6 ! click ACDC Lighting Systems Ltd, Innovation Works, Barrowford, Lancashire, BB9 6ES www.acdclighting.co.uk [email protected] Problems? Call our Installation Helpline on ++44 (0) 845 862 6400 1 C D AC Connect fitting to driver and power up to check if it illuminates. Angle the fitting as desired and fully tighten screw and threaded sleeve to lock fitting in place. Installation complete. If you have any problems please contact ACDC. INS-1104 B ISSUED 01/03/2012 APPROVED BY AH INSTALLATION INSTRUCTIONS 1104 BLADE FLUSH BRACKET Installation complete, if you come across any problems please contact ACDC. INS-1104-FB B ISSUED 01/03/2012 APPROVED BY AH