Transcript
1
2
3
4
5
6
7
8
9
10
11
12
13
14
IF IN DOUBT, ASK.
15
16
A0 DRG. No.
31.747 806.4 A
3rd Angle Projection
B
C
17.087 434.0
27.109 688.6
24.274 616.6
26.860 682.2
21.976 558.2
PITCH +/- 2.5
Distribution Code
DRAWN BS 308
PROPRIETARY INFORMATION
This document contains proprietary information which is forwarded to you in confidence for a specific purpose.It shall not be reproduced nor transfered to other documents nor disclosed to others,nor used for manufacturing or any other purpose without the prior written permission of Digital Projection Ltd. It shall be returned immediately upon request.
29.407 746.9
D
1.750 44.5
ROLL +/- 2.5
E
22.224 564.5
YAW +/- 1.25
F
31.675 804.5
26.540 674.1
G
22.067 560.5
16.929 430.0
15.709 399.0
10.630 270.0
14.585 370.5
11.085 281.6
21.892 556.1 (INTERNAL WIDTH)
15.709 399.0
30.827 783.0
H
J
K
26.274 667.4
24.274 616.6
29.409 747.0 L
STACKED RIGGING FRAME ASSEMBLY MATERIAL
7 6
A PRE REVS
Unless Otherwise Stated
TOLERANCES UNLESS OTHERWISE STATED METRIC:
1.000 = ±0.01 1.00 = ±0.1
4
CODE
3
FINISH
2
IMPERIAL
1 ITEM
CAD GENERATED DRAWING DO NOT MAKE MANUAL CHANGES
LAST CHANGE
5
B
RIGGING FRAME ASSEMBLY TYPE 2 - DIMENSIONS
DESCRIPTION
REFER TO
No OFF
REMARKS
FIRST USED ON
DIGITAL
THE SURFACE TEXTURE ROUGHNESS NUMBER OF MACHINED SURFACES SHOULD BE EQUAL TO OR LESS THAN 0.8um (N6 CLA32)
1.0 = ±0.2
REV.
1
NOTE
= ±0.4
DIMENSIONS IN MILLIMETRES
REMOVE ALL BURRS & SHARP EDGES. DO NOT SCALE DRAWING
Fractional ±1/64"
DRAWN
Decimal ± 0.005"
APP.DO.
ANGLES ± 0° 30
DATE
B
DRAWN
DS 13-08-12
1:2.5 DS
ORIGINAL SCALE
APP.ENG. DATE
27-09-10
PROJECTION
TITLE
RIGGING FRAME ASSY, TYPE 2
MIDDLETON M24 1XX COMPONENT OR DRG.No.
111-265 A0:SHEET
1 OF 2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
IF IN DOUBT, ASK.
3rd Angle Projection
Distribution Code
DRAWN BS 308
PROPRIETARY INFORMATION
This document contains proprietary information which is forwarded to you in confidence for a specific purpose.It shall not be reproduced nor transfered to other documents nor disclosed to others,nor used for manufacturing or any other purpose without the prior written permission of Digital Projection Ltd. It shall be returned immediately upon request.
A0 DRG. No.
ITEM NO. QTY. PART NO DESCRIPTION 1 1 111-277 ADJUSTER ASSY,FRONT L.H., GRAB RAIL 2 1 111-278 ADJUSTER ASSY,FRONT R.H., GRAB RAIL 3 1 111-279 ADJUSTER ASSY,REAR L.H., GRAB RAIL 4 1 111-280 ADJUSTER ASSY,REAR R.H., GRAB RAIL 5 8 108-630 CORNER BRACKET, GRAB RAIL, PAINTED 6 4 111-270 ROD, SHORT, GRABRAIL, TYPE 2 7 4 111-271 ROD, LONG, GRABRAIL, TYPE 2 8 4 111-266 HANDLE, SHORT, GRAB RAIL, PAINTED, TYPE 2 9 4 111-267 HANDLE, LONG, GRAB RAIL, PAINTED, TYPE2 10 4 104-926 BOSS, PIN LOCK SOCKET 11 4 105-146 BAR, SHORT, PROJECTOR ALIGNMENT 12 4 104-688 STACKING PIN, SPECIALTY FASTENERS 13 4 105-399 LANYARD 14 16 LBM00132 WASHER, M10, PLAIN 15 16 108-685 WASHER M10 SPRING, ST ST 16 16 108-234 M10 DOME NUT 17 24 LBM00021 WASHER M6 SPRING ST ST 18 24 108-605 M6x16 POZI PAN HD 19 4 104-045 SCREW M4x6 POZI PAN HEAD ST ST 20 4 112-592 ADAPTOR PLATE ASSY, TITAN PRO III, PAINTED 21 8 108-655 CORNER PACKING PIECE, GRAB RAIL 22 1 111-819 CARTON, TITAN, 895x713x418 23 1 111-829 LABEL, RIGGING FRAME, TYPE II 24 1 108-688 LABEL - REFER TO PROJECTOR MANUAL 25 1 108-669 PACKING PIECE, PROJECTOR MOUNT, GRAB RAIL 26 2 111-320 SHIPPING BRACKET, RIGGING FRAME, TYPE 2
REVISION A A B A F A A A A C E B B A A A A A A B A A C D A B
23 1
A
24 1
B
21 8
C
D
20 4
E
11 4
9 4
13 4
12 4
18 24
16 16
17 24
26 2 F
7 4 25 1
15 16
3 1
14 16 17 4
G
6 4
PACKAGING DETAILS 8 4
IMPORTANT - WHEN ASSEMBLING THE SHIPPING BRACKET, ENSURE THAT A SPRING WASHER (ITEM 17) IS SUPPLIED WITH THE PAN HEAD SCREW (ITEM 18) H
4 1
1 1
J
2 1
MOUNTING QUAD TITAN, TITAN & HIGHLITE PROJECTORS THE TITAN QUAD MOUNTS ONTO THE FRONT & REAR ADJUSTER BRACKETS
K
THE TITAN PRO III USES ADAPTER PLATE ASSEMBLY 112-592 (4-OFF) - (SUPPLIED WITH RIGGING FRAME) THE HIGHLITE 660/8000 USES ADAPTER BRACKET ASSEMBLY 111-894 (1-OFF)
10 4
(NOT SUPPLIED WITH RIGGING FRAME)
THE TITAN 600/700 USES SPARES KIT - TITAN 600-700 ADAPTER PLATE 113-004 (1-OFF)
(NOT SUPPLIED WITH RIGGING FRAME)
NOTES - FOR RIGGING FRAME DIMENSIONS SEE SHEET 2 L
- FOR DETAILS OF CENTRE LENS POSITIONS SEE 112-924
MATERIAL
7 6
LAST CHANGE
5
B A PRE REVS
4
CODE
3
FINISH
2 1 ITEM
CAD GENERATED DRAWING DO NOT MAKE MANUAL CHANGES
DESCRIPTION
REFER TO
No OFF
REMARKS
RE-DRAWN - SHEET2 WAS SHEET 3 SHEET 3 DELETED 108-688 NOW REV C 111-829 NOW REV B 112-592 WAS 111-965 111-279 A TO B SHEET 2 - YAW NOW 1.25 WAS 2.5
Unless Otherwise Stated
TOLERANCES UNLESS OTHERWISE STATED METRIC:
1.000 = ±0.01 1.00 = ±0.1
IMPERIAL
FIRST USED ON
DIGITAL
THE SURFACE TEXTURE ROUGHNESS NUMBER OF MACHINED SURFACES SHOULD BE EQUAL TO OR LESS THAN 0.8um (N6 CLA32)
1.0 = ±0.2
REV.
1
NOTE
= ±0.4
DIMENSIONS IN MILLIMETRES
REMOVE ALL BURRS & SHARP EDGES. DO NOT SCALE DRAWING
Fractional ±1/64"
DRAWN
Decimal ± 0.005"
APP.DO.
ANGLES ± 0° 30
DATE
B
DRAWN
DS 13-08-12
1:2 DS
ORIGINAL SCALE
APP.ENG. DATE
27-09-10
PROJECTION
TITLE
RIGGING FRAME ASSY, TYPE 2
MIDDLETON M24 1XX COMPONENT OR DRG.No.
111-265 A0:SHEET
2 OF 2
