Transcript
TEL.
Bul. Despota Stefana br.204 11060 Beograd, Srbija + 381 11 / 329 16 26; + 381 11 / 329 19 52; + 381 11 / 329 22 67 MOB. + 381 63 / 103 99 42 FAX. + 381 11 / 275 96 49 WEB. www.stevcevic.co.yu
Brigade katalog proizvoda
PRODUCT CATALOGUE 2007 Broadband Sound Reversing Alarms Reversing Alarms Blind Spot Mirrors Vehicle CCTV Systems Satellite Navigation Digital Recorders and Dome Cameras Ultrasonic Reversing Sensors Ultrasonic Side Scanning Sensors Pulsed Radar Reversing Sensors Work Lights and Beacons Warranties
Brigade Electronics – the leader in 2
Introduction For over 30 years, Brigade Electronics has single-handedly promoted the cause of ‘Reversing Safety’, helping to save thousands of lives and prevent many times more accidents through its efforts. Today, the company commands more than 65 per cent of the reversing alarm market in Europe and exports its range of vehicle safety alarms and CCTV systems to many countries as far a field as Australia, Africa and the Americas.
Philip and Christopher Hanson-Abbott (managing director and chairman)
From its global HQ in Kent, the company markets its products via subsidiary companies in Germany, Italy and the USA, as well as in partnership with over 50 specialist distributors worldwide. Brigade’s R & D team has built up a range of products that covers the complete spectrum of reversing safety systems and CCTV solutions for ‘all round visibility’ plus parking sensors, digital video recorders, heavy duty work lamps, beacons and mirrors.
Safety doesn’t cost – it pays Accidents are costly and traumatic events that transport and mobile plant fleets can ill afford. The average cost of a reversing accident, excluding personal injury and other hidden costs, was judged to be £469 in 1999 when the ‘Accident Analysis and Prevention Journal’ undertook its study into the problem. Today the costs are likely to be considerably higher. The cost/benefit analysis for a 1,200 truck transport company with a vehicle life of eight years, revealed that rear end damage costs were £521 per vehicle, per annum – that’s £625,000 per annum – or nearly £5 million in total over the eight year life of the fleet! So investing in a Brigade safety system can significantly reduce this cost, with the savings going directly on the operating company’s profits.
Brigade House, South Darenth, Kent
vehicle safety solutions 3
Pioneers in reversing safety Brigade has worked hard to pioneer ways to reduce the 25 per cent of all work related road deaths that the HSE estimates are caused by reversing vehicles. We produced the first ever reversing alarm and rear detection system in Europe and the first rear view CCTV system in the UK. All-round visibility, navigation and mobile surveillance According to Brake, the road safety charity, vehicle ‘blind spots’ were a contributory factor in over 1,500 crashes in 2005, 21 of which were fatal! To help reduce this figure Brigade has developed a range of blind-spot cameras and mirrors, to help give drivers of buses and trucks a clear view of pedestrians and cyclists on all sides of the vehicle. In public service and commercial vehicles, CCTV systems are playing an important role in security, insurance claim management and navigation as well as safety. Brigade can offer a range of camera systems, mobile digital recording units and navigation solutions to meet this growing need. Better reversing safety Brigade has also pioneered the development of an innovative reversing alarm that provides clearer and more accurate warning than traditional alarms. Unlike traditional narrowband alarms it uses broadband sound, which is instantly and unambiguously locatable. Also, unlike narrowband alarms, it does not cause a noise nuisance
Award winning products Over the last three decades, Brigade Electronics has been presented with numerous awards for its pioneering technology. More recently the company has received the following accolades: 2003
The John Connell Award for Innovation awarded by the Noise Abatement Society
2004
Supplier of the Year from Hella
2005
Noise Management Innovations Award from the Society of Automotive Engineers
2006
Fleet Safety Forum Award for Vehicle Safety
as the sound is confined to the danger area. We have not only taken an active role in promoting awareness of reversing safety but also campaigned for improvements to relevant legislation.
Contents 4
PRODUCT
PAGES
Broadband Sound Reversing Alarms
5-7
Reversing Alarms
8
Self-Adjusting Smart Reversing Alarms NIGHTSHIFT Reversing Alarms Fixed Volume Reversing Alarms Dual and Constant Tone Alarms Speaking Alarms Switches and Timers
9 10 11-12 13 14-15 15
Blind Spot Mirrors
16-17
Vehicle CCTV Systems
18
Monitors Cameras Cables Multi-camera Module and Supplementary Brackets Monitor/Camera Compatibility Chart Complete Standard Systems Articulated Truck/Trailer Connection Options
19-21 22-24 25 26 27 28-37 38
Satellite Navigation including Low Bridge Warning System
39-41
Digital Recorders and Dome Cameras
42-45
Ultrasonic Reversing Sensors
46
Two Sensor Systems Four Sensor Systems Ultrasonic Side Scanning Sensors Sidescan
47 48-50 51 51
Pulsed Radar Reversing Sensors
52
Work Lights and Beacons
54
HID HID Xenon and Halogen Beacons Warranties
55 56-58 59 60
Broadband Sound Reversing Alarms 5
‘Noiseless’ reversing alarms. Reversing alarms are vital for vehicle safety yet their very use can cause noise nuisance and irritation to workers and local residents, especially when used out of normal working hours. The bbs-tek® alarm emits a unique “shh… shh…” sound which solves the problem. Its broadband sound is multi-frequency, replacing the narrow frequency band of conventional alarms. Its sound is instantly locatable so you immediately know which vehicle is reversing and where it is coming from. So it is much safer than conventional narrowband alarms. It is directional, concentrating the sound in the danger area so reducing noise nuisance. Broadband sound also dissipates more quickly beyond the danger zone, so it is much less of a nuisance to local residents and is less likely to be ignored by workers due to over exposure to the warning sound. Many major commercial organisations and government bodies have already recognized the dual benefits of fitting bbs-tek® to their public service vehicles, mobile plant and trucks. AS SEEN AND APPROVED BY THE NOISE ABATEMENT SOCIETY
Broadband Sound Reversing Alarms 6
All Broadband Sound Reversing Alarms have a LIFETIME WARRANTY.
Heavy Duty
Ideal for dump trucks, bulldozers, loading shovels and all heavy earthmoving machinery.
BBS-107 BBS-102
• Tough, durable, guaranteed waterproof (IP68) • Conform to SAE J994 environmental standards • Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration • Can be steam-cleaned and pressure-hosed • CE and ‘e’ marked (EMC) MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BBS-107 BBS-102
24 24
107 102
1.0 1.0
Driver Driver
173x79x95 173x79x95
153 153
Medium Duty
Ideal for trucks, buses and coaches, light mobile plant, forklift trucks and industrial vehicles.
BBS-97 BBS-92
• Tough, durable, guaranteed waterproof (IP68) • Conform to SAE J994 environmental standards • Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration • Can be steam-cleaned and pressure-hosed • CE and ‘e’ marked (EMC) MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BBS-97 BBS-92 BBS-87 BBS-82 NIGHTSHIFT BBS-90(NSR) PETROL TANKERS BBS-92(ADR)
12–24 12–24 12–24 12–24
97 92 87 82
0.5 0.5 0.5 0.5
Speaker Speaker Speaker Speaker
127x65x76 127x65x76 91x55x45 91x55x45
98-108 98-108 76 76
12–24
90-78
0.5
Speaker
127x65x76
98-108
12–24
92
0.5
Speaker
127x65x76
98-108
Electric Forklift Truck Medium Duty
BBS-87 BBS-82
• Tough, durable, guaranteed waterproof (IP68) • Conform to SAE J994 environmental standards • Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration • Can be steam-cleaned and pressure-hosed • CE and ‘e’ marked (EMC) MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BBS-97HV BBS-92HV BBS-87HV BBS-82HV
36–80 36–80 36–80 36–80
87 82 87 82
0.15 0.15 0.15 0.15
Speaker Speaker Speaker Speaker
127x65x76 127x65x76 127x65x76 127x65x76
98-108 98-108 98-108 98-108
Broadband Sound Reversing Alarms Medium Duty Broadband Alarms have a LIFETIME WARRANTY, Backchat and Constant Tone Alarms have a TWO YEAR WARRANTY.
7
Medium Duty – Movement Indicators
• Tough, durable, guaranteed waterproof (IP68) • Conform to SAE J994 environmental standards • Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration • Can be steam-cleaned and pressure-hosed • CE and ‘e’ marked (EMC) MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BBS-77 BBS-72 BBS-67 BBS-62
12–24 12–24 12–24 12–24
77 72 67 62
0.5 0.1 0.1 0.1
Speaker Speaker Speaker Speaker
91x55x45 91x55x45 91x55x45 91x55x45
76 76 76 76
BBS-77 BBS-72 BBS-67 BBS-62
bbs-tek® BACKCHAT ® Speaking Reversing Alarms
The reversing aid that speaks for itself! “Shh! Stand well clear, vehicle reversing...” Produces real speech with unrivalled quality and clarity. The voice is directional and commands attention, especially from children. • • • •
Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration Dust/waterproof to IP68 Can be steam-cleaned and pressure-hosed CE and ‘e’ marked (EMC)
BBS-BC-01
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BBS-BC-01
12-24
90
0.4
Speaker
122x84x50
102
Constant Tone Alarms – Ideal as Forward Horns, In-Cab Warnings and other specialist applications Medium Duty
Ideal for use as forward horn or other warning on a wide variety of specialist vehicles, forklift trucks and electric vehicles. Safer than a conventional horn, and eliminates noise nuisance and complaints. See page 5 for more information on the advantages of bbs-tek broadband sound alarms over conventional pure tone alarms. • • • • •
Tough, durable, guaranteed waterproof (IP68) Conform to SAE J994 environmental standards Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration Can be steam-cleaned and pressure-hosed CE and ‘e’ marked (EMC) MODEL
VOLTS DC
CT-BBS-97 12-24 CT-BBS-92 12-24 HIGH VOLTAGE FORKLIFT TRUCK CT-BBS-97HV 36-80 CT-BBS-92HV 36-80
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
97 92
0.3 0.3
Speaker Speaker
127x65x76 127x65x76
98-108 98-108
97 92
0.3 0.3
Speaker Speaker
127x65x76 127x65x76
98-108 98-108
CT-BBS-97 CT-BBS-92 CT-BBS-97HV CT-BBS-97HV
Reversing Alarms 8
Brigade Electronics – World leader in reversing alarms for over 30 years! Brigade is pushing back the boundaries of reversing safety with its comprehensive range of reversing, speaking and constant tone alarms. The company that pioneered reversing safety in Europe leads the way with innovative technological and design advances. The BACKALARM range is packed with product features that deliver true benefits to the user. These include improved reliability, increased sound pressure level accuracy, quicker and more accurate adjustment to ambient noise levels, easier and neater installation plus longer life. Not all reversing bleepers are the same! Of the four types of sounder (Dome Speaker, Driver, Conventional Cone Speaker and Piezo) our unique and patented Dome Speaker design is the best option for high sound pressure level (SPL) models. It offers superb sound quality from a relatively low current consumption unit. It is tough, durable and guaranteed waterproof (IP68).
Lifetime Warranty Most heavy duty and medium duty Brigade BACKALARMS come with a “no-quibble, fuss-free” lifetime warranty that covers the alarm for the life of the vehicle. See page 60 for further details of Brigade Warranties across our product range.
Next come Driver models. These are also tough, durable and guaranteed waterproof offering good sound quality for high SPLs. Conventional Cone Speakers are a good option for medium and low SPL models, but are unsuitable for high SPL models over 102dB(A). Most budget and light duty alarms use Piezo sounders, which are good for light duty applications but are not so tough or reliable and the SPL may reduce in low temperatures. Their piercing, high frequency sound may cause irritation and noise nuisance.
Self-Adjusting Smart Reversing Alarms 9
All Self-Adjusting Backalarms have a LIFETIME WARRANTY.
Self-Adjusting Smart BACKALARM® – Digital Self-Adjusting Volume Takes the guesswork out of sound pressure level (SPL) selection. Ideal for vehicles or machines working in areas with widely differing ambient noise levels, where a fixed-volume reversing alarm will be either too quiet in loud environments (very hazardous), or too noisy in quiet environments (irritating and a nuisance). Self-Adjusting Smart BACKALARMS, featuring digital sound sampling and a listening profile matched to worksite noise, are the world’s most technically advanced self-adjusting reversing alarms. Continuous self-adjustment of their SPL reduces unnecessary loudness and irritation to operators and local communities. Self-Adjusting Smart BACKALARMS feature a small hidden and highly robust microphone by which they measure the ambient SPL. They then self-adjust their own SPL, up or down, to maintain just 5-10 dB louder. Loud enough to be heard, but not so loud as to cause a nuisance.
Heavy Duty
Ideal for dump trucks, bulldozers, loading shovels and all heavy earthmoving machinery. Features our unique and patented dome speaker. Double-reflex flared horn design for extra strength, durability, sound quality and constant sound pressure level (SPL), even under extreme temperatures. • • • • •
Tough, durable, guaranteed waterproof (IP68) Conform to SAE J994 environmental standards Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration Can be steam-cleaned and pressure-hosed CE and ‘e’ marked (EMC)
SA-800 SA-801 SA-600
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
SA-800 SA-801 SA-600
12-24 12-24 12-24
87-112 87-112 82-107
0.3 0.3 0.3
Dome Speaker Dome Speaker Dome Speaker
156x85x108 180x85x108 127x80x80
111-114 78-156 92-112
Medium Duty
For trucks, buses and coaches, light mobile plant and industrial vehicles. Carefully optimised frequency/loudness characteristics make these units clearly audible under typical working conditions without being a nuisance in the urban/highway environment. • • • • •
Tough, durable, guaranteed waterproof (IP68) Conform to SAE J994 environmental standards Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration Can be steam-cleaned and pressure-hosed CE and ‘e’ marked (EMC)
SA-400
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
SA-400
12-24
82-102
0.2
Speaker
100x72x32
76-82
NIGHTSHIFTTM Reversing Alarms 10
All NIGHTSHIFT™ Alarms have a TWO YEAR WARRANTY.
NIGHTSHIFT™ Technology NIGHTSHIFT technology is our built-in override which enables reversing in built-up areas at night without disturbing local residents. Simply double-engage reverse gear quickly and the reversing alarm will either reduce in volume, or cut-out completely – depending upon the model selected. Resets automatically when reverse gear disengaged. ®
NIGHTSHIFT™ BACKALARM Reversing Bleeper BA-32(NS) BA-42(NS) BA-42(NS)ADR
For trucks, buses and coaches, light mobile plant and industrial vehicles. Carefully optimised frequency/loudness characteristics make these units clearly audible under typical working conditions without being a nuisance in the urban/highway environment. • • • • •
Tough, durable, guaranteed waterproof (IP68) Conform to SAE J994 environmental standards Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration Can be steam-cleaned and pressure-hosed CE and ‘e’ marked (EMC) MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BA-32(NS) BA-42(NS) PETROL TANKERS
12-24 12-24
90/0 90/78
0.2 0.2
Speaker Speaker
91x49x41 91x49x41
76 76
BA-42(NS)ADR
12-24
90/78
0.2
Speaker
91x49x41
76
®
NIGHTSHIFT™ BACKCHAT Speaking Reversing Alarm
The reversing aid that speaks for itself! “BLEEP! Stand well clear, vehicle reversing...” It reproduces real speech with unrivalled quality and clarity. The voice is directional and commands attention, especially from children. Ideal for all road vehicles.
BC-01(NS)
• • • •
Dust/waterproof to IP68 Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration Can be steam-cleaned and pressure-hosed CE and ‘e’ marked (EMC) MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BC-01(NS)
12-24
90/0
0.4
Speaker
122x84x50
102
NIGHTSHIFT™ BACKALERT™ Combined Bleeper and Light
The BACKALERT combined bleeper and light is as easy to install as changing a light bulb, giving the added safety of a reversing bleeper without the time, complication and cost of wiring and fitting. It uses a miniature 20 watt long-lasting halogen bulb with a silver-plated reflector and one of the smallest reversing bleepers available anywhere. Simply replace one of your existing reversing light bulbs with a BACKALERT. BLT-20(NS) BLT-20L(NS)
• Ideal for vans, minibuses and motorhomes MODEL BLT-20(NS) BLT-20L(NS)
VOLTS DC
SOUND LEVEL dB(A)@1m
12 24
87/0 97/0
LIGHT 20 watt Halogen Bulb 20 watt Halogen Bulb
NIGHTSHIFT™ Override Switches Can be used with any Brigade reversing alarm that does not already feature NIGHTSHIFT technology.
NS-2 NS-3
MODEL
VOLTS DC
SIZE (mm) (WxHxD)
LIGHT
NS-2 NS-3
12-24 12-24
51x29x40 51x29x40
For manual gear boxes For auto gear boxes
Fixed Volume Tonal Reversing Alarms Heavy and Medium Duty Fixed Volume Backalarms have a LIFETIME WARRANTY (except BA-32 which has a TWO YEAR WARRANTY).
11
BACKALARM® – Fixed Volume Heavy Duty
Ideal for dump trucks, bulldozers, loading shovels and all heavy earthmoving machinery. Features our unique and patented dome speaker (see page 8 for details). Double-reflex flared horn design for extra strength, durability, sound quality and constant sound pressure level (SPL), even under extreme temperatures.
BA-890 BA-891
Sound frequency of 1.9kHz is optimised for construction equipment. Lower frequency alarms are more likely to be masked by construction site noise, which is mainly lower frequencies of around 1.0kHz. • • • • •
Conform to SAE J994 environmental standards Tough, durable, guaranteed waterproof (IP68) Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration Can be steam-cleaned and pressure-hosed CE and ‘e’ marked (EMC) MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BA-890 BA-891 BA-680
12-24 12-24 12-24
112 112 107
0.5 0.5 0.3
Dome Speaker Dome Speaker Dome Speaker
156x85x108 180x85x108 127x80x80
111-114 78-156 92-112
BA-680
Medium Duty BA-470 BA-460
For trucks, buses and coaches, light mobile plant and industrial vehicles. Carefully optimised frequency/loudness characteristics make these units clearly audible under typical working conditions without being a nuisance in the urban/highway environment. • • • • • • • •
Conform to SAE J994 environmental standards Tough, durable, guaranteed waterproof (IP68) Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration NightSilent model available (BA-165) Single bolt fitting available (BA-760) Can be steam-cleaned and pressure-hosed 100 v/m immunity (EMC) CE and ‘e’ marked (EMC)
BA-170 BA-160
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BA-470 BA-460 BA-170 BA-160 BA-165 BA-130 BA-13 BA-32
12-24 12-24 12-24 12-24 12-24 12-24 12-24 12-24
102 97 102 97 97 87 90 90
0.3 0.2 0.3 0.2 0.2 0.2 0.3 0.2
Speaker Speaker Speaker Speaker Speaker Speaker Speaker Speaker
100x72x32 100x72x32 105x65x32 105x65x32 105x65x32 105x65x32 66x74x96 91x49x41
76-82 76-82 75-85 75-85 75-85 75-85 Single Bolt 76
97
0.2
Speaker
68x68x63
Single Bolt
BA-165 BA-130
BA-13
SINGLE (REAR) BOLT FITTING BA-760
12-24
BA-32
BA-760
Fixed Volume Tonal Reversing Alarms 12
BA-13PT has a LIFETIME WARRANTY, other models on this page have a TWO YEAR WARRANTY.
ADR / Petroleum Tanker Specification
BA-13PT
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BA-13PT BA-13PT BA-32ADR
12 24 12-24
90 95 90
0.2 0.2 0.2
Speaker Speaker Speaker
64x70x101 64x70x101 91x49x41
Single Bolt Single Bolt 76
Note: BA-13PT AND BA-32ADR models features special cable with braided armoured conduit to meet regulations.
Light Duty BA-32ADR Suitable for most light vehicles and small forklift trucks. Includes an optional night-silent feature which automatically cuts out the bleeper when the vehicle lights are on. • Electronics potted in epoxy against mud, water and vibration • Dust proof/water resistant (IP66) • CE and ‘e’ marked (EMC) BA-57
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BA-57
12-24
90
0.03
Piezo
48x60x48
Single Bolt
Value Reversing Alarms VRA-260 • Water resistant (IP67) • ‘e’ marked (EMC) • Mylar plastic speaker
VRA-260(S), VRA-230(S)
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
VRA-260 VRA-260(S) VRA-230(S)
12-80 12-80 12-80
97 97 87
0.08 0.08 0.08
Speaker Speaker Speaker
102x71x40 102x71x40 102x71x40
76-82 76-82 76-82
Budget Reversing Alarms
VRA-390, VRA-390HV
VRA320NSR
• Water resistant (IP66) • ‘e’ marked (EMC) • Piezo ceramic sounder MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
VRA-390
12-24
90
0.05
Piezo
48x48x37
Single Bolt
36-80
90
0.5
Piezo
48x48x37
Single Bolt
90-78 90 90-78
0.2 0.03 0.03
Piezo Piezo Piezo
42x42x32 40x40x31 40x40x31
Single Hole Single Hole 44
FORKLIFT TRUCKS VRA-390HV
LIGHT CLUSTER FITTING VRA-320NSR VRA-320 VRA-320NS/NR VRA-320
VRA-320NS/NR MODULE
24 12-24 24
Note: VRA-320NSR has an inbuilt NIGHTSHIFT sound reduction feature. VRA-320NS/NR module can be coupled with VRA-320 to provide NIGHTSHIFT sound reduction feature.
Dual and Constant Tone Alarms 13
All Dual and Constant Tone Alarms have a TWO YEAR WARRANTY.
Dual Function and Dual Tone Warning Alarms – Ideal for manlifts and specialist vehicles / machines Dual tone alarms provide audible warning in hazardous areas associated with vehicles and mobile equipment. Dual tone sound warns of dangers specific to certain machines or equipment (lowering scissor lifts, rotating drive shafts, extending outriggers, etc.). Dual function alarms have two trigger wires and give both a conventional ‘bleep’ tone for reversing and either a dual tone or constant tone (depending on the model) warning for other dangers.
DT-32
Medium Duty
• Can be steam-cleaned and pressure-hosed • CE and ‘e’ marked (EMC)
• Conform to SAE J994 environmental standards • Tough, durable, guaranteed waterproof (IP68) • Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration
DT-160
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
DT-32 DT-160 DT-460 DF-116 DF-470
12-24 12-24 12-24 24 12-24
90 97 97 90 102
0.2 0.2 0.2 0.3 0.3
Speaker Speaker Speaker Speaker Speaker
91x49x41 105x65x32 100x72x32 105x65x32 100x72x32
76 75-85 76-82 75-85 82
DT-460, DF-470
Constant Tone Alarms – Ideal as Forward Horns, In-Cab Warnings and other specialist applications DF-116
Medium Duty
• Can be steam-cleaned and pressure-hosed • CE and ‘e’ marked (EMC)
• Conform to SAE J994 environmental standards • Tough, durable, guaranteed waterproof (IP68) • Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration
CT-470
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
CT-470
12-24
102
0.3
Speaker
100x72x32
76-82
Light Duty CT-57TCA-2
• • • •
PCB fully potted in epoxy against mud, water and vibration Water resistant (IP66) CE and ‘e’ marked (EMC) Two metre twin core cable
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
CT-57TCA-2
12-24
90
0.02
Piezo
48x60x47
Single Bolt
VCT-320
Value Constant Tone Alarms and Forward Horns VCT-02 • Water resistant (IP66) • CE and ‘e’ marked (EMC) MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
VCT-320 VCT-02 VCT-012 VCT-024
12-24 24 12 24
90 90 85 85
0.05 0.05 0.05 0.05
Piezo Piezo Piezo Piezo
40x40x31 60x60x80 50x50x35 50x50x35
Single Bolt Single Bolt Single Bolt Single Bolt
VCT-012/VCT-024
Speaking Alarms 14
All BACKCHAT and BACKALERT Alarms have a TWO YEAR WARRANTY. ®
BACKCHAT Speaking Reversing Alarms
The reversing aid that speaks for itself! “BLEEP! Stand well clear, vehicle reversing...” It reproduces real speech with unrivalled quality and clarity. The voice is directional and commands attention, especially from children. Ideal for all road vehicles.
BC-01(NS) – Nightshift BC-01 – single message
BC-01HP – single message BC-02HP – twin message
• • • •
Dust/waterproof to IP68 Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration Can be steam-cleaned and pressure-hosed CE and ‘e’ marked (EMC) MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SOUNDER UNIT
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BC-01(NS) BC-01 BBS-BC-01 BC-01HP BC-02HP
12-24 12-24 12-24 12-24 12-24
90 90 90 110 110
0.4 0.4 0.4 0.4 0.4
Speaker Speaker Speaker Speaker Speaker
122x84x50 122x84x50 122x84x50 122x84x50 122x84x50
102 102 102 102 102
Single message = Reversing Twin message = Reversing and tail-lift lowering ®
BACKCHAT Speaking Attack Alarms
In moments of danger, the ATTACK ALARM is activated by a panic button. Its high sound level siren is followed by an urgent spoken message requesting assistance. The message is repeated continuously until deactivated by pressing the hidden ‘off’ switch.
BC-AA BC-AA(BUS)
• • • •
Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration Can be steam-cleaned and pressure-hosed Dust/waterproof to IP67 CE and ‘e’ marked (EMC) MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BC-AA BC-AA(BUS)
12-24 12-24
110 110
0.4 0.4
115x115x120 115x115x120
48 48
Bespoke Messages Your own message eg: “Stand well clear Brigade vehicle reversing...” can be inexpensively incorporated into BACKCHAT Reversing Alarms and Attack Alarms.
Bespoke messages can be up to eight seconds long. Maximum speech quality is achieved with four seconds maximum messages.
MODEL
DESCRIPTION
BC-01(NS-B) BC-01(B) BC-02(B) BC-01HP(B) BC-02HP(B) BBS-BC-01(B) BC-AA(B)
NIGHTSHIFT double-engage reverse gear single message (90dB) Single bespoke message (90dB) Two bespoke messages (90dB) Single bespoke message (110dB) Two bespoke messages (110dB) bbs-tek Broadband Sound single bespoke message (90dB) Single bespoke attack alarm message (110dB)
®
BACKCHAT Handbrake Warning Alarms
BC-01(H/Brake) BC-01(4W)(H/Brake)
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
BC-01(H/Brake) BC-01(4W)(H/Brake)
12-24 12-24
90 90
0.4 0.4
122x84x50 122x84x50
102 102
Message – “BLEEP, HANDBRAKE NOT APPLIED.”
Speaking Alarms 15
All BACKCHAT and BACKALERT Alarms have a TWO YEAR WARRANTY. ®
BACKCHAT Vehicle Intercom A two-way communication system, operating in either simplex (one way at a time) or duplex (two way) form. Master unit includes volume control. Provides clear, reliable communication and can be mounted internally or externally. Ideal for any vehicle where the driver needs to communicate with others not in the cab; eg, refuse collection vehicle, horsebox, security vehicle, custodial transport, etc. • • • • •
Special circuitry to minimise background noise Solid-state, spark-free electronics, epoxy-sealed against mud, water and vibration Can be steam-cleaned and pressure-hosed Dust/waterproof to IP67 CE and ‘e’ marked (EMC)
BC-VI BC-VI-2
MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
CURRENT AMPS
SIZE (mm) (WxHxD)
HOLE CENTRE (mm)
OPERATING SYSTEM
BC-VI BC-VI-2
12-24 12-24
80-95 80-95
0.4 0.4
122x84x50 122x84x50
102 102
Simplex Duplex
Vehicle Intercom – Separate components MODEL
DESCRIPTION
BC-VI MASTER BC-VI SLAVE BC-V2 MASTER BC-VI-2 SLAVE
12-24 Master unit Slave unit + 25 metres cable 12-24 Master unit Slave unit + 25 metres cable ®
BACKALERT Combined Bleeper and Light The BACKALERT combined bleeper and light is as easy to install as changing a light bulb, giving the added security of a reversing bleeper without the time, complication and cost of wiring and fitting. It uses a miniature 20 watt long-lasting halogen bulb with a silver-plated reflector and one of the smallest reversing bleepers available anywhere. Simply replace one of your existing reversing light bulbs with a BACKALERT.
• Ideal for vans, minibuses, motorhomes, MPVs and cars MODEL
VOLTS DC
SOUND LEVEL dB(A)@1m
BLT-20 BLT-20L
12 24
87 97
LIGHT
BLT-20 BLT-20L
20 watt Halogen Bulb 20 watt Halogen Bulb
1
Also see NIGHTSHIFT models on page 10
Switches and Timers MODEL
VOLTS DC
DESCRIPTION
TCO-47 SW-16 PS/003 SS/11/M EC-009 NS-2 NS-3 VRA-320NS/NR
12-24 – – – 12-24 12-24 12-24 12-24
Auto-reset cut-out Pigtail microswitch - electro-mechanical Magnetic proximity switch Mechanical 'swinging arm' switch In-Line timer, 4 or 8 seconds to cut-out Cut-out switch Cut-out switch for auto gear box Sound reduction module for BA-320
2
3
1 TC0-47 Auto-reset Backalarm cut-out. Dash-mounted single-touch timed relay. Allows driver to cut-out Backalarm if reversing on highway between 11.30pm-7.00am. Auto-resets after 3-4 mins. time delay. 2 SW-16 ‘Pigtail’ microswitch. Easy installation adjacent to gearshift lever/linkage so that ‘pigtail’ tip is moved 1 inch. 3 PS/003 Magnetic Proximity Switch. Operates when magnet (fixed to gear linkage) is moved to within 0.5 inches or less of switch. 3 amps max rating. 4 EC-009 In-line timer. Allows Backalarm to sound for first few seconds only of reversing manoeuvre. (Choice of four or eight seconds.) Epoxy-sealed against mud, water and vibration. 5 NS-2/NS-3 NIGHTSHIFT Backalarm cut-out switch. Simply double-engage reverse gear quickly to deactivate the Backalarm. Re-sets when reverse gear disengaged. NS-3 has longer time delay for auto gear boxes. Epoxy-sealed against mud, water and vibration. Can be fitted in minutes alongside Backalarm at back of vehicle. NO WIRING NECESSARY TO CAB.
4 5
Blind Spot Mirrors 16
Blind Spot Mirrors Dobli wide view blind spot mirrors are specifically designed to provide truck drivers with clear visibility of the area on the nearside of the vehicle. Fitted to the front of the truck they are viewed through the windscreen. They meet the requirements of the latest EU legislation for blind spots in trucks (2003/97/EC) and a single Dobli mirror will cover not only the expanded Class IV and Class V mirror areas, but also a large area to the nearside of the cab that otherwise remains ‘blind’ to the driver – even after meeting the requirements of 2003/97/EC. Dobli mirror kits are designed to fit all leading truck brands. Brigade also offers a range of half-moon and full-moon bubble mirrors for maximum visibility on forklift trucks and mobile machinery.
Blind Spot Mirrors 17
All Blind Spot Mirrors have a ONE YEAR WARRANTY.
Dobli wide view, near side front, blind spot mirrors
Complete right hand drive kits (mirror head, mounting bracket, fixings). Size (mm) 168 x 250 x 50. UNHEATED MIRROR KITS
HEATED MIRROR KITS
MODEL
TRUCK MODEL
MODEL
TRUCK MODEL
DMK-017 DMK-001 DMK-016 DMK-009 DMK-010 DMK-002 DMK-018 DMK-006 DMK-019 DMK-007 DMK-003 DMK-011 DMK-013 DMK-012 DMK-021 DMK-022 DMK-023 DMK-020 DMK-014 DMK-015 DMK-004 DMK-005 DMK-008
DAF 1100-3600 DAF CF, XF, 65, 75, 85, 95 DAF LDV/400 DAF LF Iveco Eurocargo Iveco Stralis MAN F MAN L/M Series MAN TGA Mercedes Actros Mercedes Atego, Axor Mercedes SK/Ecoliner Mercedes Sprinter <2006 Mercedes Vario Renault Magnum Renault Mascot Renault Master Renault Premium/Midlum Scania 3-Series Scania 4-Series Scania R Volvo FM/FH <2002 Volvo FM/FH >2002
DMK-517 DMK-501 DMK-516 DMK-509 DMK-510 DMK-502 DMK-518 DMK-506 DMK-519 DMK-507 DMK-503 DMK-511 DMK-513 DMK-512 DMK-521 DMK-522 DMK-523 DMK-520 DMK-514 DMK-515 DMK-504 DMK-505 DMK-508
DAF 1100-3600 DAF CF, XF, 65, 75, 85, 95 DAF LDV/400 DAF LF Iveco Eurocargo Iveco Stralis MAN F MAN L/M Series MAN TGA Mercedes Actros Mercedes Atego, Axor Mercedes SK/Ecoliner Mercedes Sprinter <2006 Mercedes Vario Renault Magnum Renault Mascot Renault Master Renault Premium/Midlum Scania 3-Series Scania 4-Series Scania R Volvo FM/FH <2002 Volvo FM/FH >2002
Dobli mirror
Half moon bubble mirror
Separate mounting brackets and mirror heads are available, please consult the Brigade price list for details. Full moon bubble mirror
EYEBALL wide view bubble mirrors Ideal for forklift trucks and mobile machinery.
MODEL
FULL OR HALF MOON
VBM-053 EB06S-B EB45S-B EB10S-B
Half Full Full Full
SIZE 300mm (12") 150mm (6") 200mm (8") 250mm (10")
Universal clamp bracket
EYEBALL Brackets MODEL
DESCRIPTION
BKT-010 BKT-011 BKT-012 BKT-013 BKT-014
Universal clamp bracket, for 15-25mm tube Universal clamp bracket, for 25-32mm tube Universal clamp bracket, for 38-40mm tube 210mm extension for BKT-010 + BKT-011 Forklift truck bracket and overhead cage clamp
Extension
Forklift truck bracket and overhead cage clamp
Vehicle CCTV Systems 18
Vehicle CCTV solutions for safety and security. We have over 30 years experience of providing reversing safety systems for all kind of commercial vehicles and mobile plant machinery – from trucks and buses up to loading shovels and dump trucks. So we know what it takes to build robust CCTV systems that really deliver the performance and reliability that you expect. That goes for both our renowned Professional 800 Series models with extensive features and long-life warranties, and our ‘Value’ models that offer outstanding quality and performance at really affordable prices. Traditionally known as BACKEYE ‘reversing camera’ systems, our range now affords greater visibility in any direction (rear, side and front, both high and low views) which results in comprehensive coverage of the vehicle to enhance vehicle, passenger and pedestrian safety as well as enhanced vehicle security. As well as separate cameras, monitors, cables and accessories, Brigade offers a range of inclusive kits that meet the needs of most standard applications – whether it be rigid vehicle, articulated truck or truck and trailer. A selection of these kits is featured here. Please consult the price list for all standard kits or talk to our Sales Advisors about the availability of bespoke kits to suit all needs.
Monitors – Professional Range 19
All Professional Range Monitors and Systems have a THREE YEAR WARRANTY.
BE-870FM TFT LCD flat screen monitor
Top of the range widescreen monitor that is ideal for trucks, buses and coaches, especially if needing multi-camera systems for all-round safety and security. Compatible with satellite navigation, DVD, digital recorders and other multi-media systems. New LED backlighting gives a much brighter picture, improved colour definition and double the life. • • • • • • • • •
Split, triple, quad screen functionality built-in 7" wide screen – ideal for split image use On-screen display Mirror/normal switching from menu 100G mechanical shock Built-in speaker 12-24Vdc Auto dimmer function 5 auto-trigger signals MODEL BE-870FM
• • • • • • • •
4 camera inputs + 1 AV input PAL and NTSC compatible 15 watt power consumption Electronic distance markers Low reflector coating on screen -20°C to +65°C operating temperature Backlit control buttons Auto on when reverse gear engaged
SCREEN SIZE
MECHANICAL VIBRATION
CURRENT AMPS
AUDIO
MIRROR/NORMAL IMAGE SWITCHES
SIZE (mm) (WxHxD)
7" (178mm)
15G
1.25
Yes
Yes
197x138x32
WIDESCREEN
IN-BUILT IMAGE OPTIONS
BE-870EM TFT LCD flat screen monitor
Ideal for commercial vehicles and mobile plant wanting all-round safety and security. Compatible with satellite navigation, DVD and TV. New LED backlighting gives a much brighter picture, improved colour definition and double the life. • • • • • • • • •
7" wide screen format On screen display Mirror/normal switching from the menu 100G mechanical shock Built-in speaker Sun shield 12-24Vdc Auto dimmer function 2 auto trigger signals MODEL BE-870EM
• • • • • • • •
2 camera inputs PAL and NTSC compatible 15 watt power consumption Electronic distance markers Low reflector coating on screen -20°C to +65°C operating temperature Backlit control buttons Auto on when reverse gear engaged
SCREEN SIZE
MECHANICAL VIBRATION
CURRENT AMPS
AUDIO
MIRROR/NORMAL IMAGE SWITCHES
SIZE (mm) (WxHxD)
7" (178mm)
15G
1.25
Yes
Yes
197x138x32
All Brigade 800 and 300 series CCTV systems are HALT tested and RoHS compliant.
WIDESCREEN
Monitors – Professional Range 20
All Professional Range Monitors and Systems have a THREE YEAR WARRANTY.
BE-856EM TFT LCD flat screen monitor (no control box)
Ideal for commercial vehicles and mobile plant wanting all-round safety and security. Compatible with satellite navigation, DVD and TV. New LED backlighting gives a much brighter picture, improved colour definition and double the life. • • • • • • •
On screen display 2 camera inputs Built-in speaker Auto dimmer function Low reflector coating on screen Sun shield 100G mechanical shock
• • • • • • •
-10°C to +50°C operating temperature 12-24Vdc Backlit control buttons Universal mounting bracket 12 watt power consumption Electronic distance markers Auto on when reverse gear engaged
MODEL
SCREEN SIZE
MECHANICAL VIBRATION
CURRENT AMPS
AUDIO
MIRROR/NORMAL IMAGE SWITCHES
SIZE (mm) (WxHxD)
BE-856EM
5.6" (142mm)
4G
1
Yes
Yes
172 x115 x28
BE-856DM TFT LCD flat screen monitor (with control box)
Ideal for commercial vehicles and mobile plant wanting all-round safety and security. Compatible with satellite navigation, DVD and TV. New LED backlighting gives a much brighter picture, improved colour definition and double the life. • • • • • • •
On screen display 3 camera inputs + AV Built-in speaker Auto dimmer function Low reflector coating on screen Sun shield 100G mechanical shock
• • • • • • •
-10°C to +50°C operating temperature 12-24Vdc Backlit control buttons Universal mounting bracket 12 watt power consumption Electronic distance markers Auto on when reverse gear engaged
MODEL
SCREEN SIZE
MECHANICAL VIBRATION
CURRENT AMPS
AUDIO
MIRROR/NORMAL IMAGE SWITCHES
SIZE (mm) (WxHxD)
BE-856DM
5.6" (142mm)
4G
1
Yes
Yes
172 x115 x28
BE-850M TFT LCD colour monitor
A colour TFT LCD monitor that is ideal for commercial vehicles. Compatible with satellite navigation and other systems. • On-screen display (menu & functions) • 100G mechanical shock • Integral speaker • Two camera inputs • NTSC & PAL compatible
• 10 watts (max) power consumption • -10°C to +50°C operating temperature • Auto-on when reverse gear engaged • Takes inputs from Sat Nav, DVD and other inputs
MODEL
SCREEN SIZE
MECHANICAL VIBRATION
CURRENT AMPS
AUDIO
MIRROR/NORMAL IMAGE SWITCHES
SIZE (mm) (WxHxD)
BE-850M
5.0" (127mm)
4G
1
Yes
Yes
170x115x30
BE-835M TFT LCD colour monitor
An attractive high resolution monitor that fits into even the tightest of spaces. Compatible with satellite navigation systems. • Low reflection coating on screen • One camera input • Built-in speaker • Automatic picture display whenever trigger is engaged • On screen display • AV input for Sat Nav, DVD and other inputs • Auto dimmer function MODEL
SCREEN SIZE
MECHANICAL VIBRATION
CURRENT AMPS
AUDIO
MIRROR/NORMAL IMAGE SWITCHES
SIZE (mm) (WxHxD)
BE-835M
3.5" (89mm)
5.5G
1
Yes
Yes
130x82x50
Monitors – Value and Budget Range 21
All Value Range Monitors and Systems have a TWO YEAR WARRANTY.
VBV-750BM TFT LCD flat screen monitor
Neat and attractive colour monitor with three camera inputs that is ideal for all types of vehicle applications even when space is limited. Comes with a universal mounting bracket for quick and easy installation. Compatible with satellite navigation systems. • • • • • • •
Up to 3 camera inputs Auto dimmer function Mirror/normal image switching Anti-glare screen Sun shield 100G mechanical shock -10°C to +60°C operating temperature
• • • • •
12-24Vdc Backlit control buttons Colour and tint controls Brightness and contrast control Plug and Play ready to accept DVD, satellite navigation or other add-ons • Screen menu available in 11 languages
MODEL
SCREEN SIZE
MECHANICAL VIBRATION
CURRENT AMPS
AUDIO
MIRROR/NORMAL IMAGE SWITCHES
SIZE (mm) (WxHxD)
VBV-750BM
5.0" ( 127mm)
5G
0.65
No
Yes
147x109x26
All Budget Range Monitors and Systems have a ONE YEAR WARRANTY.
VBV-155M monochrome monitor
A conventional black and white CRT monitor that includes the functionality that you would expect from more expensive models. Two camera inputs as standard, a day/night dim switch and manual/auto switch, brightness and contrast control are all included. • Night time dim switch • 12-24Vdc universal voltage • Sun shield
• 100G mechanical shock • Contrast and brightness control • Two camera inputs
MODEL
SCREEN SIZE
MECHANICAL VIBRATION
CURRENT AMPS
AUDIO
MIRROR/NORMAL IMAGE SWITCHES
SIZE (mm) (WxHxD)
VBV-155M
5.5" (138mm)
5G
1
No
Yes x 2
154x143x190
VBV-545M monochrome monitor
Without doubt the most stylish, and compact monochrome monitor available. Neat, attractive and easy-to-fit the monitor can either take one or two camera inputs as standard. Backlit control buttons for ease of use at night. • • • •
4.5" monochrome screen Night time dim switch 12-24Vdc universal voltage Sun shield
• 100G mechanical shock • Contrast and brightness controls • Two camera inputs
MODEL
SCREEN SIZE
MECHANICAL VIBRATION
CURRENT AMPS
AUDIO
MIRROR/NORMAL IMAGE SWITCHES
SIZE (mm) (WxHxD)
VBV-545M
4.5" (115mm)
5G
1.2
No
Yes x 2
128x118x158
Cameras – Professional Range 22
All Professional Range Cameras and Systems have a THREE YEAR WARRANTY.
BE-800C
Top-of-the-range colour camera with six infrared LEDs for ultra-low light performance. Delivers fantastic picture quality. • Ultra-low light performance • Solid aluminium case • 320,000 pixels • Integral sunshield • Integral microphone • -20ºC to +70ºC operating temperature • Automatic electronic iris • 100G mechanical shock • NTSC and PAL options available • Also available narrow-view (78 degrees and • 12Vdc (from monitor) 40 degrees) models MODEL BE-800C BE-800C (78) BE-800C (40)
MECHANICAL VIBRATION
AUDIO
10G 10G 10G
Yes Yes Yes
H
VIEWING ANGLE V
D
PICK-UP ELEMENT
SIZE (mm) (WxHxD)
105 65 32
80 50 25
130 78 40
1/3" CCD 1/3" CCD 1/3" CCD
75x52x75 75x52x75 75x52x75
BE-810C – Shutter camera
Top-of-the-range shutter camera with six infrared LEDs for ultra-low light performance. Delivers fantastic picture quality. • • • • • •
Motorised shutter Ultra-low light performance 320,000 pixels Integral microphone 12Vdc (from monitor) Automatic electronic iris MODEL BE-810C
• • • • •
MECHANICAL VIBRATION
AUDIO
5G
Yes
H
NTSC and PAL options available Solid aluminium case Integral sunshield -20ºC to +70ºC operating temperature 100G mechanical shock
VIEWING ANGLE V
92.5
68.8
D
PICK-UP ELEMENT
SIZE (mm) (WxHxD)
115
1/3" CCD
94x44x64
BE-820C
A top quality ultra compact colour camera with extra wide field of view. • Automatic electronic iris • -30ºC to +50ºC operating temperature • Vandal resistant waterproof housing • 100G mechanical shock • 12Vdc (from monitor) • BE-822C is forward image version MODEL BE-820C BE-822C
MECHANICAL VIBRATION
AUDIO
10G 10G
Yes Yes
H
VIEWING ANGLE V
150 150
120 120
D
PICK-UP ELEMENT
SIZE (mm) (WxHxD)
90 90
1/3" CCD 1/3" CCD
33x25x36 33x25x36
BE-840C – Tilting camera
Motorised tilt lens camera gives a panoramic rear view when driving forwards and close-up rear view when reversing. With ultra low-light performance from four built-in infrared LEDs. • Adjustable vertical angle by manual or auto tilt control • Angle of view set at 92º standard • Can be set to 40º when reverse gear engaged • Ultra-low light performance • 320,000 pixels • Integral microphone MODEL BE-840C
MECHANICAL VIBRATION
AUDIO
10G
Yes
• • • • • • •
12Vdc (from monitor) Automatic electronic iris Vandal resistant and waterproof housing Extra-wide field of view -30ºC to +50ºC operating temperature 100G mechanical shock Compatible with BE-856DM and BE-870FM monitors
H
VIEWING ANGLE V
D
PICK-UP ELEMENT
SIZE (mm) (WxHxD)
53
71
92
1/3" CCD
91x53x78
All Brigade 800 and 300 series CCTV systems are HALT tested and RoHS compliant.
Cameras – Professional Range All Professional Range Cameras and Systems have a THREE YEAR WARRANTY.
BE-300 Series – Compact, flush mount cameras – front view, side view, rear view, internal view
Compact cameras for all-round visibility and safety. Flush mounted to the vehicle the cameras streamlined compact design means they can be easily placed anywhere on the vehicle. 300 series cameras can be used with any BE-800 and VBV series monitors. Meets the requirements of the European Mirrors Directive (EC2003/97). The 300 Series easily tackles the problem of blind spots and offers a comprehensive solution to all-round visibility. • Wide field of vision • Can be linked to the MDR-200 digital video recorder systems for added vehicle security • Stay clean lens coating • Sony CCD for improved picture quality MODEL BE-300C BE-301C BE-302C BE-303C BE-304C
MECHANICAL VIBRATION
AUDIO
10G 10G 10G 10G 10G
No No No No No
• Flush mount for improved aesthetics • 290,000 pixels • Robust casing for outstanding protection from dust and water • 100G mechanical shock H
VIEWING ANGLE V
125 125 125 125 125
97 97 97 97 97
D
PICK-UP ELEMENT
SIZE (mm) (WxHxD)
73 73 73 73 73
1/3" CCD 1/3" CCD 1/3" CCD 1/3" CCD 1/3" CCD
62x42x45 62x42x45 62x42x45 62x42x45 62x42x45
BE-200C
An ultra-low light monochrome camera with six infrared LEDs. • • • • •
Ultra-low light performance 100G mechanical shock 290,000 pixels Integral microphone Sun shield MODEL BE-200C
• • • •
MECHANICAL VIBRATION
AUDIO
10G
Yes
H
0.05 lux minimum illumination Extra-wide field of view Automatic electronic iris -30ºC to +50ºC operating temperature
VIEWING ANGLE V
120
90
D
PICK-UP ELEMENT
SIZE (mm) (WxHxD)
150
1/3" CCD
94x48x38.4
BE-210C – Shutter camera
An ultra-low light monochrome camera with six infrared LEDs. • • • • •
Ultra-low light performance 100G mechanical shock 290,000 pixels Integral microphone Sun shield MODEL BE-210C
• • • •
MECHANICAL VIBRATION
AUDIO
5G
Yes
H
0.05 lux minimum illumination Extra-wide field of view Automatic electronic iris -30ºC to +50ºC operating temperature
VIEWING ANGLE V
120
90
D
PICK-UP ELEMENT
SIZE (mm) (WxHxD)
150
1/3" CCD
94x48x38.4
23
Cameras – Value Range 24
All Value Range Cameras have a TWO YEAR WARRANTY.
VBV-700C Ultra-low light colour camera fitted with no less than 18 infrared LEDs for a clear picture even in the darkest of surroundings. • 100G mechanical shock • Ultra-low light performance • Sun shield • Automatic electronic iris • -20ºC to +70ºC operating temperature • 270,000 pixels MODEL
MECHANICAL VIBRATION
AUDIO
10G
No
BE-700C
H
VIEWING ANGLE V
D
PICK-UP ELEMENT
SIZE (mm) (WxHxD)
88
66
110
1/3" CCD
70x44x54
VBV- 485C A high quality bumper fit camera with 12 infrared LEDs for ultra-low light performance. Suitable for flush mount installation and supplied with fixation nuts and ‘angle spacers’ for mounting on sloping surfaces. • Waterproof (IP67) • 298,000 pixels • Operating temperature -20°C to +70°C • Wide field of view • 100G mechanical shock • Automatic electronic iris • 1.0 lux minimum illumination MODEL
MECHANICAL VIBRATION
AUDIO
10G
No
VBV-485C
H
VIEWING ANGLE V
110
82.5
D
PICK-UP ELEMENT
SIZE (mm) (Diam x D)
130
1/3" CCD
35x50
VBV- 475C A neat, compact bumper fit camera with aluminium housing. Suitable for flush mount installation and supplied with fixation nuts and ‘angle spacers’ for mounting on sloping surfaces. • Waterproof (IP67) • 298,000 pixels • Operating temperature -20°C to +70°C • Wide field of view • 100G mechanical shock • Automatic electronic iris • 0.9 lux minimum illumination MODEL VBV-475C
MECHANICAL VIBRATION
AUDIO
10G
No
H
VIEWING ANGLE V
110
82.5
D
PICK-UP ELEMENT
SIZE (mm) (Diam x D)
130
1/3" CCD
30x62
VBV-110C – Compatible with VBV-750BM
Great ultra-low light performance delivered from 6 built-in infrared LEDs. Compact monochrome camera with sun shield. • Waterproof (IP67) • 290,000 pixels • Operating temperature -30°C to +50°C • Extra wide field of view • 100G mechanical shock • Automatic electronic iris • 0.1 lux minimum illumination MODEL VBV-110C
MECHANICAL VIBRATION
AUDIO
10G
No
H
VIEWING ANGLE V
D
PICK-UP ELEMENT
SIZE (mm) (WxHxD)
88
66
110
1/3" CCD
70x44x54
VBV-100C – Compatible with VBV-155M and VBV-545M
Great ultra-low light performance delivered from 6 built-in infrared LEDs. Compact monochrome camera with sun shield. • Waterproof (IP67) • 290,000 pixels • Operating temperature -30°C to +50°C • Extra wide field of view • Mirror/normal switching • Automatic electronic iris • 100G mechanical shock • 0.1 lux minimum illumination MODEL VBV-100C
MECHANICAL VIBRATION
AUDIO
10G
No
H
VIEWING ANGLE V
D
PICK-UP ELEMENT
SIZE (mm) (WxHxD)
88
66
110
1/3" CCD
70x44x54
Cables 25
For full details of warranties see page 60.
CAMERA CABLES FOR PROFESSIONAL 800 SERIES AND 300 SERIES MODEL
DESCRIPTION
BE-L130 BE-L120 BE-L115 BE-L110 BE-L105 BE-X003 BE-X005 BE-X010 BE-X015 BE-X020 BE-X025 BE-XM005
30m camera cable 20m camera cable 15m camera cable 10m camera cable 5m camera cable 3m extension cable 5m extension cable 10m extension cable 15m extension cable 20m extension cable 25m extension cable 5m monitor extension cable (All BE-800 series models, except BE-835)
Camera cable
3m extension cable
CAMERA CABLES FOR VALUE SERIES MODEL
DESCRIPTION
VBV-L430 VBV-L420 VBV-L410 VBV-L405 VBV-L4025 VBV-L402PC VBV-L403PC
30m camera or extension cable 20m camera or extension cable 10m camera or extension cable 5m camera or extension cable 2.5m camera or extension cable 2m Y-Piece cable for 12Vdc power and camera cable connection to monitor 3m Y-Piece cable for 12Vdc power and camera cable connection to monitor
20m extension cable
Camera or extension cable
BACKEYE VEHICLE CCTV ADAPTOR CABLES MODEL
DESCRIPTION
AC-001 AC-002 AC-003 AC-004 AC-005 AC-006 AC-007 AC-008 AC-009 AC-010 AC-011 AC-012 AC-013 A2094 AC-015 AC-016
Replace BE-700C/600C camera with VBV-700C/110C camera Replace 12Vdc System BE-740M/756M monitor With VBV-750M monitor Connects BE-200/800 series camera to BE-455/650 cable Connect BE-200/800 series monitor to BE-455 cable Connect VBV-750M/545AM/155M monitor to BE-756/740 cable Connect VBV-700C/110C camera to BE-800 series cable Connect VBV-750M/545AM/155M monitor to BE-800 series cable Replace VBV-500C (5-Pin) camera with VBV-110C (4-Pin) camera Replace VBV-545M monitor with VBV-545AM/155M/750M monitor VBV-545M to VBV-545AM Power cable adaptor Upgrade from BE-856A monitor to BE-856D monitor Connect 2 BE-800 series monitors to BE-800 series camera Replace Clarion monitor with BE-800 series monitor Value series camera for BE-800 or BE-300 series camera Connect VBV-750AM to VBV-700CM Male 4-Pin DIN to AV Phono Plugs (Yellow and White). To plug AV equipment (eg DVD, Satellite Navigation) into BE-856EM or BE-850M
Y-piece cable
Adaptor cable
Multi-camera Module and Supplementary Brackets 26
EDM-50 has a THREE YEAR WARRANTY.
EDM-50 multi-camera module and screen splitter A highly flexible, heavy duty multi-control box that takes up to 4 camera inputs plus AV input and output. Camera selection can be either manual or automatic (5 triggering functions). It provides multiple picture display – single, split, triple and quad and can be used to enhance the capability of the BE-800 series of vehicle CCTV systems.
EDM-50
• • • • • • • • • •
10-32Vdc Four camera inputs plus AV input Adjustable dwell time for each camera Individual auto triggering for each camera Individual audio volume controls Manual triggering for each camera Mirror/Normal image switch for each camera NTSC or PAL compatible -10ºC to +50ºC operating temperature Auto scanning function MODEL
VOLTS DC
CURRENT AMPS
SIZE (mm) (WxHxD)
EDM-50
10-32
Max 24 Watt
154x28x105
Low speed trigger module STOCK CODE
MODEL
A1543
LS-20
DESCRIPTION 24Vdc, Low speed trigger module, 0-20 mph (0-32 kph) adjustable
Supplementary brackets A variety of special brackets is available to meet specific requirements.
BE-800 Series LCD monitor heavy duty bracket MODEL
DESCRIPTION
BMM-011
Heavy duty LCD monitor mount – for BE-800 series monitors (except BE-835)
BMM-011
CRT monitor supplementary brackets MODEL
DESCRIPTION
BSB-003 BSB-004 BSB-005
ROPS bracket, 54mm jaw ROPS bracket, 82mm jaw ROPS bracket, 108mm jaw
Note: A variety of special brackets is available to suit specific makes/models of vehicle/machine.
BSB-003 BSB-004 BSB-005
Camera security box
BSM-006
MODEL
DESCRIPTION
BSM-006 BSM-003
Heavy duty universal camera security box + 4 security bolts and wrench Spare set of security box bolts + socket key wrench
Vehicle CCTV Kit Examples 27
For full details of warranties see page 60.
Monitor/Camera Compatibility Chart
MONITOR MODEL
CAMERA MODEL
BE-300 SERIES, COLOUR, LOW LIGHT, MINI
BE-800C, COLOUR, ULTRA-LOW LIGHT, AUDIO BE-810C, COLOUR, ULTRA-LOW LIGHT, SHUTTER + AUDIO BE-840C, COLOUR, MOTORISED TILT + AUDIO
BE-820C, COLOUR MINI
BE-200C, MONO, ULTRA LOW LIGHT, AUDIO BE-210C, MONO, ULTRA LOW LIGHT SHUTTER VBV-700C, COLOUR, ULTRA-LOW LIGHT VBV-485C, COLOUR, ULTRA-LOW LIGHT VBV-475C, COLOUR, ULTRA-LOW LIGHT VBV-110C, MONO, ULTRA-LOW LIGHT VBV-100C, MONO, ULTRA-LOW LIGHT
(1): Only on CA1
BE-835EM VBV-750BM VBV-155M VBV-545M BE-870EM BE-870FM BE-856DM BE-856EM BE-850M 7" COL 5.6" COL 5.6" COL 5.0" COL 3.5" COL 5.0" COL 5.5" MONO 4.5" MONO 7" COL TFT + AUDIO TFT + AUDIO TFT + AUDIO TFT + AUDIO TFT + AUDIO TFT + AUDIO TFT CRT CRT
(1)
(1)
(1)
(1)
(1)
(1)
Vehicle CCTV – Examples of Complete Standard Systems 28
For full details of warranties see page 60.
SINGLE CAMERA REAR VIEW SYSTEM for small to medium rigid vehicles Motorhome
Van
Mini sweeper
Minibus
3.5" colour monitor, flush mount colour camera plus cable
3.5" colour monitor, digital mini colour camera plus cable
MODEL BE-835-312
MODEL BE-835-010
BE-835M
BE-L110
BE-302C
BE-835M
BE-L110
BE-820C
5" Value colour monitor, reversing colour camera plus cable
5" Value colour monitor, flush mount colour camera plus cable
MODEL VBV-750B-010
MODEL VBV-750B-312
VBV-750BM
VBV-L410
VBV-700C
VBV-750BM
VBV-L410
BE-302C
5" Value colour monitor, bumper-fit colour camera plus cable
5" Value monitor, monochrome reversing camera plus cable
MODEL VBV-750B-610
MODEL VBV-750B-224
VBV-L410 VBV-750BM
VBV-L410
VBV-485C VBV-750AM
Many other rear view systems for vehicles are possible. Simply check monitor/camera compatibility chart on page 27 and choose cable from page 25.
VBV-110C
Vehicle CCTV – Examples of Complete Standard Systems 29
For full details of warranties see page 60.
SINGLE CAMERA REAR VIEW SYSTEM for large rigid trucks/coaches/loading shovels, etc. Rigid truck
Coach
Dump truck
Loading shovel
7" colour monitor, reversing colour camera plus cable
7" colour monitor, flush mount colour camera plus cable
MODEL BE-870-000
MODEL BE-870-320
BE-870EM
BE-L120
BE-800C
BE-870EM
BE-L120
BE-302C
7" colour monitor, reversing shutter camera plus cable
5.6" colour monitor, reversing colour camera plus cable
MODEL BE-870-100
MODEL BE-856-000
BE-870EM
BE-L120
BE-810C
BE-856EM
BE-L120
BE-800C
5.6" colour monitor, flush mount colour camera plus cable
5.6" colour monitor, reversing shutter camera plus cable
MODEL BE-856-320
MODEL BE-856-100
BE-856EM
BE-L120
BE-302C
BE-856EM
BE-L120
BE-810C
5" Value colour monitor, reversing colour camera plus cable
5" Value colour monitor, flush mount colour camera plus cable
MODEL VBV-750B-000
MODEL VBV-750B-320
VBV-750BM
VBV-L420
VBV-700C
VBV-750BM
VBV-L420
Many other rear view systems for vehicles are possible. Simply check monitor/camera compatibility chart on page 27 and choose cable from page 25.
BE-302C
Vehicle CCTV – Examples of Complete Standard Systems 30
For full details of warranties see page 60.
SINGLE CAMERA REAR VIEW SYSTEM for articulated trucks Articulated truck
Articulated tanker
7" colour monitor, reversing camera and cable plus rectractable link section and connectors for artics
7" colour monitor, flush mount camera and cable plus rectractable link section and connectors for artics
MODEL BE-870-001
MODEL BE-870-321
BE-870EM
SK-31E
SK-31E BE-800C
BE-870EM
BE-302C
7" colour monitor, reversing shutter camera and cable plus rectractable link section and connectors for artics
5.6" colour monitor, reversing camera and cable plus rectractable link section and connectors for artics
MODEL BE-870-101
MODEL BE-856-001 BE-856-00
BE-870EM
SK-31E
BE-856EM
SK-31E BE-800C
BE-810C
5.6" colour monitor, flush mount camera and cable plus rectractable link section and connectors for artics
5.6" colour monitor, reversing shutter camera and cable plus rectractable link section and connectors for artics
MODEL BE-856-321
MODEL BE-856-101
BE-856EM
SK-31E
BE-302C
BE-856EM
SK-31E BE-810C
5" Value colour monitor, reversing camera and cable plus rectractable link section and connectors for artics
5" Value colour monitor, flush mount camera and cable plus rectractable link section and connectors for artics
MODEL VBV-750B-001
MODEL VBV-750B-321
VSK-30E
VSK-30E VBV-750BM
VBV-700C
VBV-750BM
Many other rear view systems for vehicles are possible. Simply check monitor/camera compatibility chart on page 27 and choose cable from page 25.
BE-302C
Vehicle CCTV – Examples of Complete Standard Systems 31
For full details of warranties see page 60.
SINGLE CAMERA FRONT VIEW (OR HIGH-MOUNT SIDE VIEW) SYSTEM for trucks, buses and coaches Truck
Coach
7" colour monitor, flush mount colour camera plus cable
5" Value colour monitor, flush mount colour camera plus cable
MODEL BE-870-303
MODEL VBV-750B-303
BE-870EM
BE-303C
BE-L105
BE-303C
VBV-L405
VBV-750BM
TWIN CAMERA REAR VIEW + LEFT SIDE VIEW (LOW-MOUNT) SYSTEM for trucks, buses and coaches Truck
Coach
7" colour monitor, one reversing and one flush mount colour camera plus cables
7" colour monitor, two flush mount colour cameras plus cables
MODEL BE-870-402
MODEL BE-870-432
BE-L120
BE-L120
BE-800C
BE-302C
BE-870EM
BE-870EM BE-L105
BE-300C
BE-300C
BE-L105
5.6" colour monitor, one reversing and one flush mount colour camera plus cables
5" Value colour monitor, one reversing and one flush mount colour camera plus cables
MODEL BE-856-402
MODEL VBV-750B-402
BE-L120
VBV-L405
BE-800C
VBV-700C
VBV-750BM
BE-856EM BE-L105
BE-300C
VBV-L420
BE-300C
Many other rear view systems for vehicles are possible. Simply check monitor/camera compatibility chart on page 27 and choose cable from page 25.
Vehicle CCTV – Examples of Complete Standard Systems 32
For full details of warranties see page 60.
TWIN CAMERA REAR VIEW + LEFT SIDE VIEW (LOW-MOUNT) SYSTEM for articulated trucks Articulated truck
Articulated tanker
7" colour monitor, one reversing and one flush mount colour camera plus cables
7" colour monitor, two flush mount colour cameras plus cables
MODEL BE-870-403
MODEL BE-870-433
BE-L105
BE-800C
BE-L105
SK-31E
SK-31E BE-300C
BE-870EM
BE-302C
BE-300C
BE-870EM
5.6" colour monitor, one reversing and one flush mount colour camera plus cables
5.6" colour monitor, two flush mount colour cameras plus cables
MODEL BE-856-403
MODEL BE-856-433
BE-L105
BE-800C
BE-L105
SK-31E
SK-31E
BE-300C
BE-856EM
BE-302C
BE-300C
BE-856EM
5" Value colour monitor, one reversing and one flush mount colour camera plus cables
5" Value colour monitor, two flush mount cameras plus cables
MODEL VBV-750B-403
MODEL VBV-750B-433
VBV-L405
VBV-L405 BE-302C
VBV-700C
VSK-30E
VSK-30E VBV-750BM
BE-300C
VBV-750BM
BE-300C
Many other rear view systems for vehicles are possible. Simply check monitor/camera compatibility chart on page 27 and choose cable from page 25.
Vehicle CCTV – Examples of Complete Standard Systems For full details of warranties see page 60.
33
TWIN CAMERA REAR VIEW + FRONT VIEW (OR HIGH-MOUNT SIDE VIEW) SYSTEM for large rigid trucks, coaches and dump trucks Truck
Dump truck
Coach
7" colour monitor, one reversing and one flush mount colour camera plus cables
7" colour monitor, two flush mount colour cameras plus cables
MODEL BE-870-400
MODEL BE-870-430
BE-L120
BE-L120
BE-800C
BE-302C
BE-870EM
BE-870EM BE-L105
BE-303C
BE-L105
BE-303C
5.6" colour monitor, one reversing and one flush mount colour camera plus cables
5.6" colour monitor, two flush mount colour cameras plus cables
MODEL BE-856-400
MODEL BE-856-430
BE-L120
BE-L120
BE-800C
BE-302C
BE-856EM
BE-856EM BE-L105
BE-303C
BE-L105
BE-303C
5" Value colour monitor, one reversing and one flush mount colour camera plus cables
5" Value colour monitor, two flush mount colour cameras plus cables
MODEL VBV-750B-400
MODEL VBV-750B-430
VBV-L405
BE-302C
BE-L105
VBV-700C
VBV-750BM
VBV-750BM VBV-L420
BE-303C
VBV-L420
BE-303C
Many other rear view systems for vehicles are possible. Simply check monitor/camera compatibility chart on page 27 and choose cable from page 25.
Vehicle CCTV – Examples of Complete Standard Systems 34
For full details of warranties see page 60.
TWIN CAMERA REAR VIEW + FRONT VIEW (OR HIGH-MOUNT SIDE VIEW) SYSTEM for articulated trucks Articulated truck
Articulated tanker
7" colour monitor, one reversing and one flush mount colour camera plus cables
7" colour monitor, two flush mount colour cameras plus cables
MODEL BE-870-401
MODEL BE-870-431
BE-L105
BE-800C
BE-L105
BE-302C
SK-31E
SK-31E BE-303C
BE-870EM
BE-303C
BE-870EM
5.6" colour monitor, one reversing and one flush mount colour camera plus cables
5.6" colour monitor, two flush mount colour cameras plus cables
MODEL BE-856-401
MODEL BE-856-431
BE-L105 BE-800C
BE-L105
BE-302C
SK-31E
SK-31E
BE-856EM
BE-856EM
BE-303C
BE-303C
5" colour monitor, one reversing and one flush mount colour camera plus cables
5" colour monitor, two flush mount colour cameras plus cables
MODEL BE-850-401
MODEL BE-850-431
BE-L105
BE-L105 BE-302C
BE-800C
SK-31E
SK-31E BE-850M
More examples on next page.
BE-303C
BE-850M
BE-303C
Vehicle CCTV – Examples of Complete Standard Systems 35
For full details of warranties see page 60.
5" Value colour monitor, one reversing and one flush mount colour camera plus cables
5" Value colour monitor, two flush mount colour cameras plus cables
MODEL VBV-750B-401
MODEL VBV-750B-431
VBV-L405
VBV-L405
BE-302C
VBV-700C
VSK-30E
VSK-30E
BE-303C
VBV-750BM
BE-303C
VBV-750BM
TWIN CAMERA REAR VIEW SYSTEMS for trucks with drawbar trailers Drawbar truck
7" colour monitor, two reversing shutter colour cameras plus cables
5.6" colour monitor, two reversing shutter colour cameras plus cables
MODEL BE-870-104
MODEL BE-856-104
BE-856EM
BE-870EM
BE-810C
BE-810C SK-50E
SK-50E
5" colour monitor, two reversing colour cameras plus cables
5" Value colour monitor, two flush mount colour cameras plus cables
MODEL BE-850-004
MODEL VBV-750B-004
BE-850M BE-800C SK-50E
VBV-750BM
VBV-700C VSK-50E
Many other rear view systems for vehicles are possible. Simply check monitor/camera compatibility chart on page 27 and choose cable from page 25.
Vehicle CCTV – Examples of Complete Standard Systems 36
For full details of warranties see page 60.
TRIPLE CAMERA REAR VIEW + LEFT SIDE VIEW (LOW-MOUNT) SYSTEM for trucks with drawbar trailers Drawbar truck
7" colour monitor, two reversing colour cameras, one flush mount colour camera plus cables
7" colour monitor, three flush mount colour cameras plus cables
MODEL BE-870-506
MODEL BE-870-536
BE-302C
BE-800C BE-870EM
BE-870EM
SK-50E SK-50E BE-300C
BE-300C
5.6" colour monitor, two reversing colour cameras, one flush mount colour camera plus cables
5.6" colour monitor, three flush mount colour cameras plus cables
MODEL BE-856-506
MODEL BE-856-536
BE-302C
BE-800C
BE-856EM
BE-856EM
SK-50E
SK-50E
BE-300C
BE-300C
5" Value colour monitor, two reversing colour cameras, one flush mount colour camera plus cables MODEL VBV-750B-506
VBV-700C
5" Value colour monitor, three flush mount colour cameras plus cables MODEL VBV-750B-536
BE-302C
VBV-750BM
VBV-750BM
VSK-50E
VSK-50E BE-300C
BE-300C
Many other rear view systems for vehicles are possible. Simply check monitor/camera compatibility chart on page 27 and choose cable from page 25.
Vehicle CCTV – Examples of Complete Standard Systems 37
For full details of warranties see page 60.
TRIPLE CAMERA REAR VIEW + FRONT VIEW (OR HIGH-MOUNT SIDE VIEW) SYSTEM for trucks with drawbar trailers Drawbar truck
7" colour monitor, two reversing colour cameras, one flush mount colour camera plus cables
7" colour monitor, three flush mount colour cameras plus cables
MODEL BE-870-507
MODEL BE-870-537
BE-302C
BE-800C
BE-870EM
BE-870EM
SK-50E
SK-50E BE-303C
BE-303C
5.6" colour monitor, two reversing colour cameras, one flush mount colour camera plus cables
5.6" colour monitor, three flush mount colour cameras plus cables
MODEL BE-856-507
MODEL BE-856-537
BE-800C
BE-856EM
BE-302C
BE-856EM
SK-50E
SK-50E BE-303C
BE-303C
5" Value colour monitor, two reversing colour cameras, one flush mount colour camera plus cables
5" Value colour monitor, three flush mount colour cameras plus cables
MODEL VBV-750B-507
MODEL VBV-750B-537
BE-302C
VBV-700C VBV-750BM
VBV-750BM
VSK-50E
VSK-50E BE-303C
BE-303C
Many other rear view systems for vehicles are possible. Simply check monitor/camera compatibility chart on page 27 and choose cable from page 25.
Articulated Truck/Trailer Connections 38
For further information call 0870 774 1500.
BE-800 Series
VBV-700, VBV-500, VBV-100
MODEL
DESCRIPTION
MODEL
DESCRIPTION
SK-30E
30m cable + retractable link section and connectors for artics: BE-L110 10m cable for cab section BE-X020 20m extension cable for trailer section SP-07C 7-Pin bulkhead plug + Pigtail and truck/cab-end connector SP-07T 7-Pin bulkhead plug + Pigtail and trailer-end connector SC-07 retractable cable with 7-Pin sockets
VSK-30E
30m cable + retractable link section and connectors for artics: VBV-L410 10m cable for cab section VBV-L420 20m cable for trailer section VSP-47A 7-Pin bulkhead plug + Pigtail and truck/cab-end connector VSP-47B 7-Pin bulkhead plug + Pigtail and trailer-end connector SC-07-24S retractable cable with type 24S 7-Pin sockets
SK-31E
30m cable + retractable link section and connectors for artics: BE-L110 10m cable for cab section BE-X020 20m extension cable for trailer section SP-7A 7-Pin bulkhead plug + Pigtail and cab-end connector SP-7B 7-Pin bulkhead plug + Pigtail and trailer-end connector SC-7 retractable cable with 7-Pin sockets – unique pin layout
VSK-31E
SK-50E
All cables + retractable link section and connectors for twin-camera truck + trailer combination: BE-L115 15m cable for truck BE-X020 20m extension cable for trailer camera BE-X005 5m extension cable for truck camera CS-020 two-way camera selector SP-7A 7-Pin bulkhead plug + Pigtail and truck-rear connector SP-7B 7-Pin bulkhead plug + Pigtail and trailer-front connector SC-7 retractable cable with 7-Pin sockets – unique pin layout
30m cable + retractable link section and connectors for artics: VBV-L410 10m cable for cab section VBV-L420 20m cable for trailer section VSP-47A 7-Pin bulkhead plug + Pigtail and truck/cab-end connector VSP-47B 7-Pin bulkhead plug + Pigtail and trailer-end connector AC-014 adaptor cable (VBV-L410 to VSP-47A) AC-006 adaptor cable (VSP-47B to VBV-L420) SC-7 retractable cable with 7-Pin sockets - unique pin layout
VSK-50E
All cables + retractable link section and connectors for twin-camera truck + trailer combination: VBV-L420 20m cables (2) VBV-L405 5m cable for truck camera VCS-020 two-way camera selector VSP-47A 7-Pin bulkhead plug + Pigtail and truck-rear connector VSP-47B 7-Pin bulkhead plug + Pigtail and trailer-front connector SC-07-24S retractable cable with 7-Pin sockets
VSK-50E-A
All cables + retractable link section and connectors for truck-only section of twin-camera truck + trailer combination: VBV-L420 20m cable for truck BVB-L405 5m cable for truck camera VCS-020 two-way camera selector VSP-47A 7-Pin bulkhead plug + Pigtail and truck-rear connector SC-07-24S retractable cable with 7-Pin sockets
Trailer only section of SK-30E: BE-X020 20m extension cable for trailer section SP-07T 7-Pin bulkhead plug + Pigtail and trailer-end connector
VSK-30E-T
Trailer only section of VSK-30E and VSK-50E: VBV-L420 20m cable for trailer section VSP-47B 7-Pin bulkhead plug + Pigtail and trailer-end connector
Trailer only section of SK-31E and SK-50E: BE-X020 20m extension cable for trailer section SP-7B 7-Pin bulkhead plug + Pigtail and trailer-end connector
VSK-31E-T
Trailer only section of VSK-31E: VBV-L420 20m cable for trailer section AC-006 adaptor cable (VSP-47B to VBV-L420) VSP-47B 7-Pin bulkhead plug + Pigtail and trailer-end connector
VSP-47A VSP-47B SC-07-24S VCS-020
7-Pin Bulkhead plug + Pigtail and truck/cab-end connector 7-Pin Bulkhead plug + Pigtail and trailer-end connector Retractable cable with type 24S 7-Pin sockets Two-way camera selector for trucks with drawbar trailers
SK-50E-A
SK-30E-T
SK-31E-T
CS-020 CS-032 SP-07C SP-07T SP-7A SP-7B SC-7 SC-7(5S) SC-07 SC-07(5S) SC-07(0.3S) SP-10 SC-10 SP-15 SC-15 SJB-01 BKT-15
All cables + retractable link section and connectors for truck-only section of twin-camera Truck + trailer combination: BE-L115 15m cable for truck BE-X005 5m extension cable for truck camera CS-020 two-way camera selector SP-7A 7-Pin bulkhead plug + Pigtail and truck-rear connector SC-7 retractable cable with 7-Pin sockets - unique pin layout
Two-way camera selector for trucks with drawbar trailers 3-camera switcher including auto-switching timer for cameras 2 and 3 7-Pin bulkhead plug + Pigtail and truck/cab-end connector 7-Pin bulkhead plug + Pigtail and trailer-end connector Note: Use extension cable BE-X020 for camera 7-Pin bulkhead plug + Pigtail and truck/cab-end connector (unique pin layout) 7-Pin bulkhead plug + Pigtail and trailer-end connector (unique pin layout) Note: Use extension cable BE-X020 for camera Retractable cable with 7-Pin sockets (unique pin layout) 5m straight cable with 7-Pin sockets (unique pin layout) Retractable cable with 7-Pin sockets 5m straight cable with 7-Pin sockets 0.3m straight cable with 7-Pin sockets 10-Pin bulkhead plug with protective boot Retractable cable with 10-Pin sockets 15-Pin bulkhead plug Retractable cable with 15-Pin sockets, with cable Junction box with terminal block 7/10-Pin bulkhead plug mounting bracket
Satellite Navigation 39
Navigation Add navigation to your Brigade CCTV system to provide travel/route information in addition to visibility in and around the vehicle. On engaging reverse gear the rear view camera will replace the satellite navigation information on screen. Either connect a navigation system to your existing Brigade CCTV or use our special splitter cable to connect a Brigade reversing camera to your existing Siemens VDO navigation system. Low bridge warning system Avoid bridge strikes with the Bridgeclear low bridge warning system. Bridgeclear uses GPS together with its own database to provide an early in-cab, audio and visual warning on the Brigade monitor if the vehicle is approaching a bridge that is too low for it. Simple to install, the system can be hidden away under the driver’s seat.
Satellite Navigation 40
For full details of warranties see page 60.
GSN-001 Navigation Computer with pre-loaded detailed European maps. Powered by Garmin
A remote black box unit designed to be connected to any Brigade CCTV monitors to provide route information, points of interest and mapping with a spoken text voice prompt that can announce streets by name. GSN-001
• 12 parallel channel GPS • Preloaded maps for the UK and Europe (street level) • SD card slot for loading custom POIs and additional map data • Composite video output • Announces streets by name to help you keep your eyes on the road
• Arrange destinations to minimize trip distance • Proximity alert feature to warn of upcoming custom POI such as safety cameras • View the map in either a 3D perspective or top-down, track-up or north-up view
MODEL
VOLTS DC
CURRENT AMPS
SIZE (mm) (WxHxD)
OPERATING TEMPERATURE
GSN-001
12-24
1.0
113x30x120
-20°C to +60°C
RDS TMC (Traffic Message Channel) – for GSN-001 Navigation System NB: Traffic warning services are provided free outside the UK. This includes France, where a chargeable premium service is also available. MODEL
DESCRIPTION
GTM-10 GTM-10F GSD-EUMAP
T-Piece cable/sensor fitted in-line with radio aerial, including lifetime subscription to Traffic Master in UK T-Piece cable/sensor fitted in-line with radio aerial, including lifetime subscription to French Premium Traffic Warning Service Updates to Garmin European detailed maps – via SD card
BE-PC5200 Siemens VDO Navigation Computer with Integrated RDS TMC Receiver
Say goodbye to CDs and DVDs to hold road network information. The PC5200 holds the entire European road network on compact SD cards which is cheaper and takes up considerably less installation space. It offers optimum operation ergonomics, extremely fast route calculation and brilliant map display. BE-PC5200
• • • • •
12-channel GPS Secure digital (SD) card 2D/3D map view Extensive destination input possibilities Integrated RDS-TMC receiver MODEL BE-PC5200
• Dynamic navigation • Pictogram and voice guidance • Status LEDs
VOLTS DC
CURRENT AMPS
SIZE (mm) (WxHxD)
OPERATING TEMPERATURE
12
1.0
132x120x37
-20°C to +60°C
MODEL
DESCRIPTION
PV12s-A BE-PC-5200 EUMAP
24Vdc down to 12Vdc dual output voltage dropper SD card with detailed European maps
Splitter cables
NAV-001, NAV-002
MODEL
DESCRIPTION
NAV-001
Splitter cable to add BE-800 Series camera to VDO Siemens navigation system. Includes reverse gear connection for auto activation.
NAV-002
Splitter cable to add VBV-700C camera (with AC-006 cable adapter) to VDO Siemens navigation system. Includes reverse gear connection for auto activation.
Satellite Navigation 41
For full details of warranties see page 60.
Bridgeclear – low bridge warning system
Over 2,000 bridge strikes take place every year in the UK, costing more than £50million. A single bridge strike could cost you many thousands of pounds in repair costs to the bridge and your vehicle, but this disastrous situation is preventable by adding the Bridgeclear module to any Brigade vehicle CCTV system. Bridgeclear uses GPS together with a comprehensive database of low bridges in Great Britain to provide drivers of tall vehicles with audible and visual warnings of potential bridge strikes. This enables the driver to take a safe alternative route. MODEL
VOLTAGE
SIZE (mm) (WxHxD)
DESCRIPTION
BW-001
12Vdc
110x125x50
Bridgeclear kit for the 800 series, comprising: Bridgeclear ECU, including BACKEYE cable connections; audio/visual display and control button and GPS aerial
MODEL
VOLTAGE
SIZE (mm) (WxHxD)
DESCRIPTION
BW-002
12Vdc
110x125x50
Bridgeclear kit for the VBV-750, comprising: Bridgeclear ECU, including vehicle CCTV cable connections; AC-011, pair of VBV-750 cable adaptors; audio/visual display and control button and GP
MODEL
DESCRIPTION
PV3-S
24Vdc down to 12Vdc voltage dropper
Bridgeclear system
Digital Recorders and Dome Cameras 42
Digital video recording systems The MDR-200 series offers robust and reliable video surveillance systems designed to provide high-quality video surveillance and recording for the demanding truck, bus and PSV markets. It offers you the choice of 4, 8, 12 or 16 camera inputs on the same vehicle recording images at the rate of up to 25 frames per second, meeting the demands of most transport applications. Used in conjunction with Brigade’s CCTV systems the MDR-200 helps protect drivers, passengers, pedestrians and vehicles plus helping to refute false claims and discourage frivolous lawsuits. An optional GPS sensor adds a record of location and speed. Video and audio recordings are stored on a removable hard disk that can be connected to a PC via USB interface or by wireless download. Alternatively the recordings can be viewed ‘in-situ’, using the hand-held X201 reviewer, or by using a GSM modem in conjunction with remote link software.
Mobile Digital Video Recording Systems 43 MDR-200 Series
• Small size, low power consumption • Up to 25 frames/second • 4 levels of resolution • Removable hard disk cartridges up to 120Gb • GPS, LAN/WLAN • Normal, alarm, timer, movement or stills recording • Watermarked images • Flexible menu system with help screens • Rapid search of recordings • 3 year warranty (30 months on Hard Drive) • Up to 58 hours of video can be stored on the hard disk, at normal recording speeds
Downloading recordings to a PC Removable hard disk cartridge can be connected to a PC to analyse, copy or archive video/audio recordings.
MODEL
SIZE (mm) (WxHxD)
VOLTS DC
OPERATING TEMPERATURE
MDR-200 Series
220x116x52
12
-40ºC to +65ºC
How to make up a typical kit
Download via WLAN A Wireless Local Area Network (WLAN) system can be used to download recordings from a vehicle to a PC.
Programming the system This can be done via: • either a MDR-200 programmer/reviewer – for on-site configuration and reviewing of recordings • or through a ‘virtual’ programmer/reviewer – using a laptop
1. Decide how many and what model Brigade cameras (dome, mini or flush mount) you want to fit (see page 45). 2. Select the appropriate MDR unit for 4, 8, 12 or 16 camera inputs (see page 44). 3. Select BE-800 series cable lengths required for each camera (see page 25). 4. Select hard disk size (80GB most popular). 5. Order at least 1 x PCLink200 programming and reviewing software per site. This includes a ‘virtual reviewer/programmer’, which can be used on a laptop, and a USB cable to connect hard drive to PC/laptop. 6. Options: a) X201 dedicated hand-held programmer and reviewer (not necessary if using virtual reviewer/programmer). b) GPS-sensor to add location and speed data. c) Wireless download. d) Various cables for special configuration.
Mobile Digital Video Recording Systems 44
For further information call 0870 774 1500.
Mobile Digital Video/Data Recorders MODEL
DESCRIPTION
MDR-204
Digital Recording system comprising: X200 4-channel digital video and data recorder; AVM-200 anti-vibration digital recorder mounting kit; VCU-01 12-24Vdc 4-camera power and video distribution box; 4 x BNC-90-01 1 metre cable with 90° BNC Plug to BNC Plug Digital Recording system comprising: X200-16 16-channel digital video and data recorder; AVM-200 anti-vibration digital recorder mounting kit; 2 x VCU-01 12-24Vdc 4-camera power and video distribution box; BNC-16-8 – 8 x BNC Plugs connected to 25-way D connector Digital Recording system comprising: X200-16 16-channel digital video and data recorder; AVM-200 anti-vibration digital recorder mounting kit; 3 x VCU-01 12-24Vdc 4-camera power and video distribution box; BNC-16-12 – 12 x BNC Plugs connected to 2 x 25-way D connectors Digital Recording system comprising: X200-16 16-channel digital video and data recorder; AVM-200 anti-vibration digital recorder mounting kit; 4 x VCU-01 12-24Vdc 4-camera power and video distribution box; BNC-16-16 – 16 x BNC Plugs connected to 2 x 25-way D connectors
MDR-208 X-200 X-200-16
MDR-212
MDR-216
Separate components for above kits MHD-200 Hard drive
VCU-01 Video distribution box
MODEL
DESCRIPTION
X200 X200-16 AVM-200 VCU-01 BNC-90-01 BNC-16-8 BNC-16-12 BNC-16-16
4-channel digital video & data recorder 16-channel digital video & data recorder Anti-Vibration X200/X200-16 digital recorder mounting kit 12-24Vdc 4-camera power and video distribution box 1 metre cable with 90º BNC plug to straight BNC plug 8 x BNC plugs connected to 25-way D connector for X200-16 12 x BNC plugs connected to 2 x 25-way D connectors for X200-16 16 x BNC plugs connected to 2 x 25-way D connectors for X200-16
Removable mobile hard drives for mobile digital video/data recorders MODEL
DESCRIPTION
MHD-200-40 MHD-200-80 MHD-200-100 MHD-200-120
40Gb for X200 & X200-16 80Gb for X200 & X200-16 100Gb for X200 & X200-16 120Gb for X200 & X200-16
Programming and reviewing software and hardware – for X200 and X200-16 X201 Hand held reviewer
MODEL
DESCRIPTION
PCLink200
Software for on-site programming and reviewing (via laptop) and back office reviewing and image/data analysis (on PC or laptop) with hard drive power supply and connection to PC/laptop USB socket Dedicated hand-held on-site programmer & reviewer (instead of using laptop). NB: PCLink200 software still required for back office reviewing and image/data analysis (on PC)
X201
Wireless download options - for X200 and X200-16 mobile digital video/data recorders
VMA-001External aerial
MODEL
DESCRIPTION
X200-LANLink VMA-001 VMT-001
Software to enable wireless download of recorded images and data Vehicle-mounted external aerial Vehicle-mounted wireless transmitter (Gateway)
Optional connecting cables
VMT-001Wireless transmitter
MODEL
DESCRIPTION
X200-TFT-003 X200-TFT-010
3m BNC to phono cable. Connect X200 direct to monitor A/V input 10m BNC to phono cable. Connect X200 direct to monitor A/V input
Mobile Digital Video Recording Systems 45
For full details of warranties see page 60.
GPS Sensor GPS-16 is a complete GPS Sensor including embedded receiver and antenna for accurate positioning, time and date data for reporting with video data. GPS-16 includes an embedded receiver and antenna for accurate positioning. It adds to recorded data details of the location and speed. MODEL GPS-16-LVS
SIZE (mm) (DIAxH) 91x91.5 GPS Sensor
Mini-Dome Camera Brigade offers a wide range of compatible cameras, including mini-dome and digital mini as well as any of Brigade’s interior or exterior mounting vehicle CCTV cameras (see pages 22-24). AC-006 adaptor cables are required for ‘Value’ and ‘Budget’ cameras. MODEL
DESCRIPTION
MD-50 MD-50SM MD-50AM
Mini dome camera with 1/3"CCD (76x26 dia x d) Surface mounting adaptor (raises housing 20mm off surface to allow for single cable hole in surface) Angled surface mounting adaptor (adds approx. 15 degrees to the vertical/horizontal view)
MD-50
MD-50SM surface mounting adaptor
MD-50AM angled mounting adaptor
Digital Mini-Cameras MODEL
DESCRIPTION
DMC1025 DMC1036
Mini-camera with 2.5mm lens and BE-L100 cable connector Mini-camera with 3.6mm lens and BE-L100 cable connector
DMC-1025
Camera Cables Brigade mobile digital recorders and associated mini-dome cameras and digital mini cameras are all compatible with Brigade’s ‘Professional’ 800 Series cables. See page 25.
BE-L100 cable
Ultrasonic Reversing Sensors 46
Ultrasonic Reversing Sensors Reversing and parking in confined spaces can be tricky and hazardous, demanding considerable awareness and skill from the driver. Using proven ultrasonic technology BACKSCAN informs the driver of the distance between the vehicle and any obstacle at the rear. As soon as reverse gear is engaged BACKSCAN starts scanning to the rear of the sensors and a three stage warning is given to the driver. Those models with the additional visual warning also display to the driver the distance between the vehicle and the object behind. Any driver who has multiple-drop collections or deliveries or who is required to park or reverse in tight situations will find BACKSCAN invaluable. The product range minimises damage and gives greater protection to people and objects behind the vehicle, whether moving or stationary, and can create favourable effects on insurance premiums. There are BACKSCAN systems designed for all types of vehicle from small cars up to large vans or trucks. DSM (Dynamic Scanning Memory) is included in all systems. Our unique and patented DSM feature prevents ‘false alarms’ from tow-hooks, rear-mounted tyres and other ancillary equipment that intrude into the first 40cm of each sensor’s detection zone.
Ultrasonic Reversing Sensors – Two Sensor Systems 47 F-Class – Budget Two Sensor Systems for vehicles up to 1.5m wide
• • • • • • • •
Flush mount, slimline sensors Dynamic Scanning Memory Warning buzzer Fully waterproof sensors (IP68) CE and ‘e’ marked RoHS compliant 12-24 Vdc Operating temperature -25°C to +80°C
Detection range
ECU and buzzer
Model selector SENSOR TYPE
WITHOUT DISPLAY
WITH DISPLAY
KMMA 7° upward angle Not suitable for metal bumpers
BS-200F-KMMA
BS-210F-KMMA
KB 7° upward angle Suitable for metal or plastic bumpers and bodywork
BS-200F-KB
BS-210F-KB
Optional visual display
Ultrasonic Reversing Sensors – Four Sensor Systems 48
For further information call 0870 774 1500.
F-Class – Budget Four Sensor Systems, 1.5m Range
ECU and buzzer
• • • • • • • •
Flush mount, slimline sensors Dynamic Scanning Memory Warning buzzer Fully waterproof sensors (IP68) CE and ‘e’ marked RoHS compliant 12-24Vdc Operating temperature -25°C to +80°C
Detection range
Model selector
Optional visual display
ENSOR TYPE
WITHOUT DISPLAY
WITH DISPLAY
WITHOUT DISPLAY with 15m extension cable
WITH DISPLAY with 15m extension cable
KMMA 7° upward angle Not suitable for metal bumpers
BS-400F-KMMA
BS-410F-KMMA
BS-415F-KMMA
BS-420F-KMMA
KB 7° upward angle Suitable for metal or plastic bumpers and bodywork
BS-400F-KB
BS-410F-KB
BS-415F-KB
BS-420F-KB
15m cable
Ultrasonic Reversing Sensors – Four Sensor Systems 49
For full details of warranties see page 60.
A-Class – Professional Four Sensor Systems, 2.5m Range
• Self diagnostic function • Interchangeable sensors • Dynamic Scanning Memory • Warning buzzer • LED + digital visual warning • Fully waterproof sensors (IP68) • CE and ‘e’ marked • RoHS compliant • 12-24Vdc • Operating temperature -25°C to +80°C
Detection range
ECU and buzzer
Model selector SENSOR TYPE KMP Inbuilt PCB for instant interchangeability Not suitable for metal bumpers
WITHOUT DISPLAY with 15m extension cable
WITH DISPLAY with 15m extension cable
BS-415A-KMP
BS-420A-KMP
Optional visual display
KBP 7° upward angle Inbuilt PCB for instant interchangeability Suitable for metal bumpers
BS-415A-KBP
BS-420A-KBP
KXP Underslung sensor with inbuilt PCB for instant interchangeability
BS-415A-KXP
BS-420A-KXP
15m cable
Ultrasonic Reversing Sensors – Four Sensor Systems 50
For further information call 0870 774 1500.
AW-Class – Professional Four Sensor Systems with waterproof control box, suitable for large trucks and buses, 2.5m Range.
Waterproof ECU and buzzer
• Self diagnostic function • Interchangeable sensors • Dynamic Scanning Memory • Warning buzzer • 4-row coloured LED + digital readout • Fully waterproof control box (IP68) • Fully waterproof sensors (IP68) • CE and ‘e’ marked • RoHS compliant • 12-24Vdc • Operating temperature -25°C to +80°C
Detection range
Model selector Visual display
SENSOR TYPE
WITHOUT DISPLAY with 15m cable
WITH DISPLAY with 15M cable, plus 0.5m warning zone to compensate for sensor mounted in-board of the rear
BS-430AW-KMP
BS-435AW-KMP
KBP Inbuilt PCB for instant interchangeability 7° angled sensor. Suitable for metal bumpers
BS-430AW-KBP
BS-435AW-KBP
KXP Underslung sensor with inbuilt PCB for instant interchangeability
BS-430AW-KXP
BS-435AW-KXP
KMP Inbuilt PCB for instant interchangeability Not suitable for metal bumpers
15m cable
BS-435 models feature a 0.5m warning zone to compensate for sensors being mounted in-board of the rear of the vehicle.
Ultrasonic Side Scanning Sensors 51
For further information call 0870 774 1500.
Sidescan side detection and warning system ECU
Four hundred people are killed every year in Europe by near-side turning collisions. Most such accidents happen at low speeds, typically as the vehicle is turning after traffic lights, at a roundabout or turning into/out of a side road. These can easily be avoided with Sidescan.
Audio/visual display * KBP sensor drill-through type
SS-400 4 sensor system
• Four sensor system to warn driver when turning MODEL
DESCRIPTION
SS-400
BS-430A-ECU waterproof electronic control box BS-VDM-04 audio/visual display module BS-15MCA 15m main cable BS-KBP sensors with 2.5m cables SS-400ECU side-turn indicator sensor/ECU SS-BC-08 BACKCHAT side turn warning message
Drivers’ direct field of view
Pulsed Radar Reversing Sensors 52
BACKSENSE radar detection system Backsense utilises pulsed radar technology to detect people and objects at a longer range than is typical with ultrasonic reversing aids, which makes it ideal for heavy goods vehicles, construction vehicles and mobile plant machinery. Designed to work on the front, side or rear of vehicles, a single sensor is sufficient to cover each zone on all but the largest machines. Because pulsed radar travels through plastic, ruggedness and reliability are ensured by sealing the sensor head inside the sensor housing.
Pulsed radar reversing sensors 53 Backsense – standard systems
• • • • • • • •
Conforms to SAE1455 (environmental) Resistant to moisture, dust, vibration, heat, cold, glare LED visual warning 3 levels of audio warning -40°C to +85°C operating temperature Fully waterproof (IP68) CE and ‘e’ marked Choice of models with detection ranges from 3m to 6m
Standard
MODEL
VOLTS DC
POWER CONSUMPTION
DETECTION RANGE
SENSOR SIZE (cm)
BS-1030 BS-1045 BS-1060
12-24 12-24 12-24
4W@12V 4W@12V 4W@12V
3.0m 4.5m 6.0m
13.3 (Dia) 13.3 (Dia) 13.3 (Dia)
Display
Separate components MODEL
DESCRIPTION
BS-L300 BS-L450 BS-L750
3.0m standard Backsense extension cable 4.5m standard Backsense extension cable 7.5m standard Backsense extension cable
Backsense – heavy duty systems Heavy duty Detection zones are programmable via a laptop. Can be set to ignore fixed objects, bodywork and attachments that are in the detection zone. Multiple sensors can be networked together to provide the greatest area of coverage. • • • • • • • •
Conforms to SAE1455 (environmental) Resistant to moisture, dust, vibration, heat, cold, glare LED visual warning 3 levels of audio warning -40°C to +85°C operating temperature Fully waterproof (IP68) CE and ‘e’ marked Choice of models with detection ranges from 3m up to 8m MODEL
VOLTS DC
POWER CONSUMPTION
DETECTION RANGE
SENSOR SIZE (cm)
BSHD-2030 BSHD-2045 BSHD-2060 BSHD-2080
12-24 12-24 12-24 12-24
200mA 200mA 200mA 200mA
3.0m 4.5m 6.0m 8.0m
200x210x65 200x210x65 200x210x65 200x210x65
Separate components MODEL
DESCRIPTION
BSHD-L450
4.5m heavy duty Backsense extension cable
Work Lights and Beacons 54
HID Xenon and Halogen Work Lights Nordic work lights are supremely tough and durable. Designed and manufactured for use in the most difficult and demanding conditions, they will not let you down in situations where working safety depends on good visibility. Nordic Xenon HID (High Intensity Discharge) lights are four times brighter than ordinary halogen lights and provide a ‘white’ light that is very similar to daylight, so they are much easier on the eye, cause less strain and are safer. The Xenon tubes typically last 10 times longer than a halogen bulb and use far less power.
Beacons Brigade offers Strobe warning beacons for forklift trucks and electric vehicles. Some models feature fully potted electronic circuitry for longer life as a result of high resistance to shock and vibration.
Work lights – HID Xenon 55
HID – High Intensity Discharge.
N200D HID – including Xenon tube For use in mining and construction where the ‘daylight like’ luminosity increases driver safety through improved visibility and reduced eye strain. Extreme shock and vibration resistance.
• • • •
Integrated deutsch + 1,000mm wires Wide or narrow flood Shock (60G) and vibration (20G) Fully waterproof (IP68) MODEL
• • • •
Aluminium housing and hardened glass lens -40°C to +85°C operating temperature 3,000 hours warranty on Xenon tube 4 point anti-shock and vibration mounting
WATTS
LIGHT PATTERN
SIZE (mm) (WxHxD)
35 35 35 35
Wide flood Narrow flood Wide flood Narrow flood
140x140x192 140x140x192 140x140x192 140x140x192
X200-0110 X200-0111 X200-0210 X200-0211
N200D HID
N400D HID – including Xenon tube For use in mining and construction where the ‘daylight like’ luminosity increases driver safety through improved visibility and reduced eye strain. Extreme shock and vibration resistance.
• • • •
Integrated deutsch + 1,000mm wires Shock (50G) and vibration (12G) Fully waterproof (IP67) Reinforced glass fibre housing and hardened glass lens
MODEL
• -40°C to +85°C operating temperature • 3,000 hours warranty on Xenon tube • 4 point anti-shock and vibration mounting
WATTS
LIGHT PATTERN
SIZE (mm) (WxHxD)
35 35 35 35
Wide flood Narrow flood Wide flood Narrow flood
140x140x150 140x140x150 140x140x150 140x140x150
X400-0110 X400-0111 X400-0210 X400-0211
N400D HID
N25D HID – including Xenon tube For use in mining, construction and agriculture. Extreme shock and vibration resistance.
• 900mm wires • Shock (50G) and vibration (12G) • Glass fibre reinforced plastic housing and hardened glass lens MODEL
• • • • •
Fully waterproof (IP67) -40°C to +85°C operating temperature 3,000 hours warranty on Xenon tube Separate ballast unit 3 point anti-shock and vibration mounting
WATTS
LIGHT PATTERN
SIZE (mm) (WxHxD)
35 35 35 35
Wide flood Narrow flood Wide flood Narrow flood
100x100x132 100x100x132 100x100x132 100x100x132
X250-0150 X250-0151 X250-0250 X250-0251
N25D HID
N100F 0°HID For mounting flush to the vehicle body in locations that require wide illumination.
• Hardened glass lens • Wide flood light pattern • 0° angle MODEL X100-3150 X100-3151
VOLTS
SIZE (mm) (WxHxD)
12 24
152x100x30 152x100x30
N100F 0°HID
Work lights – Halogen 56
All Halogen lights supplied without bulb, unless specified.
N300D + N300D Twinpower General purpose, heavy duty work lights for use in tough conditions in field, forest or on the road.
• Vibration dampened • Hardened glass lens MODEL N300D H320-0002 H300-0002
• Twin bulb or handle options • Integrated amp
LIGHT PATTERN
SIZE (mm) (WxHxD)
FUNCTION
Flood Flood
170x150x103 160x171x102
Twin bulb Single bulb
N300D + N300D Twinpower with handle General purpose, heavy duty work lights for use in tough conditions in field, forest or on the road.
• Vibration dampened • Hardened glass lens
• Twin bulb or handle options • Integrated amp
N300D Twinpower MODEL H360-0002 H350-0002
LIGHT PATTERN
SIZE (mm) (WxHxD)
FUNCTION
Flood Flood
160x171x102 160x171x102
Twin bulb + handle Single bulb + handle
N200D General purpose, heavy duty work lights for use in tough conditions in construction or forestry. N300D Twinpower and Handle • Vibration dampened • Hardened glass lens • Integrated amp MODEL H200-0000 H200-0001 N200D
LIGHT PATTERN Wide flood Narrow flood
SIZE (mm) (WxHxD) 140x140x108 140x140x108
N25D General purpose, heavy duty work lights.
• Vibration dampened • Hardened glass lens • Integrated amp MODEL N25D N25
H250-0000 H250-0001
LIGHT PATTERN Wide flood Narrow flood
SIZE (mm) (WxHxD) 14x140x108 140x140x108
N25 General purpose work lights for where space is limited.
• Hardened glass lens • Integrated amp Anti-vibration mounting MODEL
LIGHT PATTERN
SIZE (mm) (WxHxD)
H252-0000
Wide flood
100x100x94
Work lights – Halogen 57
All Halogen lights supplied without bulb, unless specified.
N100D For applications that require wide illumination.
• Vibration dampened • Hardened glass lens • Integrated amp MODEL H100-0000 H100-0001
LIGHT PATTERN
SIZE (mm) (WxHxD)
Wide flood Narrow flood
150x98x89 150x98x89
N100D
N100 For applications that require wide illumination.
• Hardened glass lens • Integrated amp MODEL H102-0000
LIGHT PATTERN
SIZE (mm) (WxHxD)
Wide flood
150x98x89
N100
N100S Side-mounted work light for locations that require wide illumination.
• Hardened glass lens • Integrated amp • Side-mounted MODEL
LIGHT PATTERN
SIZE (mm) (WxHxD)
H102-2000
Wide flood
150x98x89
N100S
N500 Headlight – Headlight combination For locations that require wide illumination.
• 6 pin AMP connection • LED indicator and parking light unit • Hardened glass lens MODEL H502-8185 H502-8186
LIGHT PATTERN
SIZE (mm) (WxHxD)
Wide flood Narrow flood
230x160x150 230x160x150
N500
Work lights – Halogen 58
All Halogen lights supplied without bulb, unless specified.
N100F 0° – Flush mount For mounting flush to the vehicle body in locations that require wide illumination.
• Hardened glass lens • Wide flood light pattern • 0° angle N100F
MODEL H102-3090
DESCRIPTION
SIZE (mm) (WxHxD)
Halogen
152x100x30
HID Xenon replacement light tubes
XO-D1S
XO-D2S
MODEL
CONNECTION
X0-D1S X0-D2S
For N400HID, N25HID, N100HID For N200HID
Beacons 59 Strobe warning beacons Ideal for forklift trucks VSB-064E + VSB-062 feature epoxy potted circuitry for extra vibration and shock resistance.
• 12-110Vdc universal • Reverse polarity protected • Voltage spike protected MODEL
VOLTS DC
JOULES
VSB-064 VSB-064E VSB-064MG VSB-062
12-110 12-110 12-110 12-110
1.5 1.5 1.5 1.5
VSB-064, VSB-064E DESCRIPTION
SIZE (mm) (WxHxD)
Beacon with replaceable tube and lens Beacon with replaceable tube and lens, potted (epoxy) circuitry Beacon with replaceable tube and lens, mag-mount and curly lead Beacon with replaceable tube and lens, potted (epoxy) circuitry
130(d)x95 130(d)x95 130(d)x95 98x71x132
VSB-064MG
Branch guards MODEL
DESCRIPTION
VSB-064BG VSB-062BG
Branch guard for VSB-064 Branch guard for VSB-062
Replacement flash tubes and lenses MODEL
DESCRIPTION
VSB-064FT VSB-062FT VSB-064LA VSB-062LA
Replacement flash tube for VSB-064 Replacement flash tube for VSB-062 Replacement amber lens for VSB-064 Replacement amber lens for VSB-062
VSB-062
Branch guard
Warranties 60
Peace of mind from Brigade The quality of our product range is the cornerstone on which the continuing relationship with our customers is built. To reflect our confidence in the reliability of our products, some have a ‘lifetime’ warranty. Many others have a 3 year warranty and the rest have a 2 year warranty, (excludes light bulbs and Xenon tubes). The following quick reference chart indicates the warranty available on Brigade products. Lifetime Warranty (covers the alarm for the life of the vehicle) bbs-tek® reversing alarms (all models except Backchat and Constant Tone), Self-adjusting Backalarms (SA-400/600/800 ranges), Fixed volume Backalarms (BA-100/400/600/800 ranges, BA13). 3 Year Warranty Backeye CCTV range (all monitors and cameras with a BE prefix, MDR digital recorder). 2 Year Warranty All other products (excluding bulbs and Xenon tubes).
CCTV Extended Warranty All VBV CCTV models are provided with a standard 2 year ‘New for old’ warranty. You can extend this warranty up to 3 years, simply by opting for an additional 1 year extended warranty. CCTV Standard On-Site Warranty Upgrade The on-site warranty upgrade is available only as an upgrade to product warranty of at least the same period. This means an engineer will visit your site to repair/replace (at our discretion) the faulty CCTV part. For faults reported on weekdays by 1.00pm an engineer will visit within three working days. For faults reported on weekdays after 1.00pm an engineer will visit within four working days. Note: ‘weekdays’ and ‘working days’ are 9.00am to 5.00pm Monday to Friday inclusive, excluding public holidays. Call outs will incur charge if it is found that the Brigade product is not at fault (e.g. vehicle wiring or switching fault). Warranty Terms and Conditions Brigade warrants all goods to be free from defect in material and workmanship in normal use provided that they have been installed and operated in accordance with the instruction supplied. The commencement date of all warranties is the date of delivery to the purchaser unless otherwise agreed in writing by Brigade. The period during which the warranty applies is stated above. Brigade make no other warranty, express or implied, with respect to the goods, their marketability, quality or fitness for any particular use or purpose. In particular, but without prejudice to the general provisions of the conditions of sale, no responsibility is assumed for incidental or consequential damage by reason of any warranty express or implied. Full details of Brigade’s Terms and Conditions are contained in the Price List.
Brigade Electronics PLC reserves the right to change terms, conditions and specifications shown in this catalogue at any time.
