Transcript
address of the SP9012N is 192.168.2.1, you may choose from
the following steps are categorized for convenience reading to
192.168.2.2 to 192.168.2.254. Then click OK.
describe how to set each mode after successful log-in. AP Mode 1. Choose Wireless > Basic Settings. Then you will see the 1. “Wireless Basic Settings” page. The default is AP mode 1. already. However, you still can set the parameters to 1. optimize your application if you want. Click Apply to save the 1. parameters. Note: In the example here, we only change the “Wireless
2. Open the web browser on your PC, key in the IP address
Network Name (SSID)” as “Join_me”, and later, we will show
2. (192.168.2.1) of the SP9012N in the address bar, and then
you if AP mode works correctly. In addition, for better coverage
2. enter.
of the AP, you may also use an external antenna; if so, remember to set the antenna setting from “Internal (8 dBi)” to “External (N-Type)” after your external antenna is successfully installed. 192.168.2.1
Logout
3. Now, you will see the log-in page of the SP9012N. The 2. default “name” and “password” are “admin” and “1234” 2. respectively. Enter them and then click Login.
2. Choose Security Settings in the left column, and here 1. comes the “Security Settings” page. You may set the 1. parameters like “Authentication” and “Encryption” for more 1. secure network communication in your application. Click * Since the SP9012N covers “AP mode” as well as “CPE mode”,
1. Apply to save the parameters. 6
5
The following screenshot shows the available access points in the wireless network from another PC aside. Now, you can see “Join_me” in the list.
CPE Mode 1. Choose Wireless > Basic Settings. Then you will see the 1. “Wireless Basic Settings” page. Choose “Wireless Client” 1. from Wireless Mode, and click Apply to save it. Feel free to 1. change the other parameters to optimize your application 1. before clicking Apply. 2. Click Site Survey, and a “Wireless Site Survey” window will 1. pop up. The window lists all the available access points / 1. routers in the wireless network. Select the one you prefer to 1. connect to, and click Selected to build the connection. 3. If the AP you connect to needs authentication or password,
Quick Installation Guide
1. click Security Settings in the left column, fill out the
11N WLAN Outdoor CPE
1. corresponding items, and click Apply to build the connection; 1. otherwise, the connection is already built and you can start to
Model No.: SP9012N
1. enjoy your speedy wireless connection.
P/N: 2300-0598
WEEE Directive & Product Disposal At the end its serviceable life ,this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.
7
Web: www.micronet.com.tw
Introduction
Note: Contact your dealer immediately if any of the above items
Micronet SP9012N is a multi-mode last-mile broadband solution
are missing, damaged, or if the unit does not work.
for customers like wireless ISP (WISPs) and system integrators. By the nature of complying with the IEEE802.11b/g/n standard and featuring high power output, SP9012N supports higher bandwidth with longer range for outdoor applications.
Tour of the Product - Pole Mounting Ring, Power Cord and PoE Injector
SP9012N can be used as the access point or the customer premises equipment (CPE). While being as the access point, it can be deployed outdoors to provide outdoor wireless internet service. In the other way to be as the outdoor CPE, it can receive wireless signal over the last mile, helping WISPs deliver internet service to the new residential and the business
Users MUST use the “Power cord & PoE Injector” shipped in
customer where wired broadband internet service, such as
the box with the SP9012N. Use of other options will cause
cable and DSL, can not serve in. In addition, the easy-to-install
damage to the SP9012N CPE.
SP9012N features outstanding performance and allows users to
1. The bottom of the SP9012N is the movable cover. Grab the
have the reliable outdoor equipment at the affordable price.
1. cover and pull it back harder to take it out as the figure shown 1. below.
Package Contents Please verify the following items are in the package: 1 x SP9012N Outdoor Wireless CPE
2. Plug a standard Ethernet cable into the RJ45 port.
1 x PoE Injector & Power Cord 1 x Quick Installation Guide 1 x Product CD 1 x Pole Mounting Ring 1
2
3. Slide the cover back to seal the bottom
8. Now you are successful for your
7. of the SP9012N.
1. hardware installation.
4. Take out the power cord and PoE injector,
Using the external antenna
7. and plug the power cord into the DC port 7. of the PoE injector.
If you prefer to use the external antenna with N-type connector for your application
5. Put what in the Step.3 and Step.4
instead of the built-in directional antenna,
7. together by plugging the other side of the
please follow the steps below.
7. Ethernet cable in the Step.3 into the PoE 7. port of the PoE injector in the Step.4. 7. When you finish the Step.5, the complete set will be like the 7. following picture.
1. Grab the black rubber on the top of the SP9012N, and 1. slightly pull it up as the figure shown below. The metal N-type 1. connector will appear.
6. Turn the SP9012N over. Put the pole mounting ring through 7. the middle hole of the SP9012N. Note: Unlock the pole mounting ring by a screw driver before
2. Connect your antenna with the N-type connector on the top
Note: putting it through the SP9012N as the bottom right
1. of the SP9012N.
Note: picture shows.
Connect the SP9012N with your PC by an Ethernet cable plugging in LAN port of PoE injector in one side and in LAN port of PC in the other side. Power on the SP9012N by PoE from PoE injector.
Software Configuration Assign a static IP address to your PC which should be in the 7. Mount the SP9012N steadily to the pole by locking the pole
same network segment with the SP9012N. As the default IP
7. mounting ring tightly. 3
4
