Transcript
CAUTION
OPERATING INSTRUCTIONS
RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash and arrowhead within the triangle is a warning sign alerting you of "dangerous voltage" inside the product.
W AR N I N G : To r e d u c e the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS.
1 2 :3 5
NOTE: CAUTION SYMBOLS ARE PRINTED ON BOTTOM OF UNIT. PLEASE REFER TO INSTRUCTION MANUAL.
CAUTION
PLEASE NOTE: YOU WILL FIND THE RATING LABEL FOR THIS PRODUCT LOCATED ON THE BASE OF THE UNIT.
DO NOT EXPOSE TO DRIPPING OR SPLASHING LIQUIDS!
CAUTION: GROUNDING OR POLARIZATION. THE PRECAUTIONS SHOULD BE TAKEN SO THAT THE WIDER BLADE OF THE AC PLUG MUST MATCH THE SLOT IN RECEPTACLE "WALL SOCKET".
DUAL ALARM STEREO CD-CLOCK-RADIO MODEL : TC-7300
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. VORSICHT: UNSICHTBARE LASERSTRAHLUNG TRITT AUS, WENN DECKEL GEÖFFNET UND WENN SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT IST. NICHT DEM STRAHL AUSSETZENI.
VARNING: OSYNLIG LASERSTRÁLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRR ÄR URKOPPLAND. STRÁLEN ÄR FARLIG. ADVARSEL: USYNLIG LASERSTRÁLING VED ÁBNING. NÁR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÁ UDS/ETTELSE FOR STRÁLING.
ATTNENZIONE: RADIONS LASER INVISIDILE. NON GUARDARE DIRETTAMENTE NELLA SORGENTE DEL LASER. ACHTUNG: LASERLINSE NICHT BERÜHREN UNSICHTBARER LASERSTRAHL. AVISO: A LENTE NUNCA DEVE SER TOCADA.
E-2
CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LASER DE CLASSE LASER DI PRIMA CLASSE KLASSE 1 LASER LASER PRIMERA CLASE LASER CLASSE 1 KLASSE 1 LASER PRODUKT
POWER SUPPLY 1
NORMAL OPERATION (AC-POWER)
2 CONTROL PANEL ENLARGED VIEW:
3 6
4
7
8
9
10
11
5
- UNDER NORMAL CONDITIONS, THE UNIT OPERATES USING AC-POWER THROUGH THE BUILT-IN AC-TRANSFORMER & AC-CORD. - MAKE SURE THE SET VOLTAGE OF THE UNIT MATCHES YOUR LOCAL HOUSEHOLD VOLTAGE. - INSERT THE PLUG OF THE AC-CORD INTO A WALL OUTLET WITH AC-POWER. - THE CLOCK + CD DISPLAY WILL LIGHT UP TO INDICATE "AC-POWER CONNECTED".
BATTERY BACK-UP OPERATION 12 13 14 15 16 17
18
19 20 21 22 23 24
- IN CASE OF AC-POWER OUTAGE OR INTERRUPTED AC-SUPPLY, THE CURRENT TIME & ALARM-TIME SETTINGS ARE PRESERVED IN THE MEMORY OF THE UNIT BY MEANS OF "BATTERY BACK-UP" FUNCTION. - OPEN THE BATTERY DOOR AND INSERT 1 PC (6F22/006P) 9V BATTERY. PLEASE OBSERVE CORRECT BATTERY POLARITIES. - CLOSE THE BATTERY DOOR. - IMPORTANT: WHEN THE SET WILL NOT BE USED FOR 3 DAYS OR MORE (AND THE SET WILL NOT BE OPERATED ON AC-POWER DURING THAT TIME), PLEASE REMOVE THE BACK-UP BATTERY TO AVOID DAMAGE TO THE SET FROM LEAKAGE OF BATTERY.
IMPORTANT ! DURING AC-SUPPLY OUTAGE OR INTERRUPTION, THE CLOCK DISPLAY WILL SWITCH "OFF". HOWEVER, THE CLOCK AND ALARM SETTINGS WILL BE SAVED IN MEMORY BY THE BATTERY BACK-UP FUNCTION.
12 : 3 5 25
26
27
_
+
LOCATION OF CONTROLS 1. AC POWER CORD & PLUG 2. HEADPHONE/ EARPHONE SOCKET 3. FM ANTENNA WIRE 4. CD-DOOR 5. CD-DOOR FINGER-GRIP 6. POWER LED LIGHT INDICATOR 7. ALARM 1 LED LIGHT INDICATOR 8. ALARM 2 LED LIGHT INDICATOR 9. SNOOZE LED LIGHT INDICATOR 10. REPEAT 1/ ALL LED LIGHT INDICATOR 11. FM-STEREO LED LIGHT INDICATOR 12. POWER ON/ OFF + ALARM OFF BUTTON 13. DISPLAY BUTTON 14. AL-1 (ALARM 1) BUTTON
E-3
15. CD PROGRAM BUTTON (PROG) 16. AL-2 (ALARM 2) BUTTON 17. DOWN/ BACK BUTTON 18. SNOOZE BUTTON 19. UP/ NEXT BUTTON 20. SLEEP BUTTON 21. CD REPEAT BUTTON 22. CLOCK BUTTON 23. CD STOP/ RADIO BAND BUTTON 24. CD PLAY/ PAUSE BUTTON 25. CLOCK + CD DISPLAY 26. RADIO TUNING CONTROL KNOB 27. VOLUME CONTROL KNOB
6F22/006P (9V) SIZE X 1 PC
SETTING THE CLOCK - PLUG IN THE UNIT. - PRESS CLOCK FOR A FEW SECONDS. THE HOUR WILL START TO FLASH IN THE DISPLAY. - PRESS BACK OR NEXT UNTIL THE CORRECT HOUR APPEARS IN THE DISPLAY. - PRESS CLOCK ONCE, THE MINUTES WILL START TO FLASH IN THE DISPLAY. - PRESS BACK OR NEXT UNTIL THE MINUTES ARE CORRECTLY DISPLAYED. - PRESS CLOCK TO START THE COUNTING OF THE SECONDS. IMPORTANT: • IF NO KEY IS PRESSED WITHIN 5 SECONDS, THE CLOCK SETTING MODE IS CANCELLED AUTOMATICALLY. • TO SET THE CURRENT TIME RAPIDLY, HOLD DOWN NEXT OR BACK.
E-4
PLAYING A CD -
PRESS ALARM OFF/POWER (12) TO SWITCH ON THE UNIT. OPEN THE CD COMPARTMENT LID AND PLACE A DISC. CLOSE THE CD COMPARTMENT LID. PRESS THE "CD PLAY" (24) BUTTON, "CD01" APPEARS IN THE DISPLAY TO INDICATE THAT TRACK 1 OF THE CD IS PLAYING. AFTER YOU PRESS "CD PLAY" (24), IT TAKES ABOUT 10 SECONDS BEFORE THE MUSIC STARTS. THE INDICATION IN THE DISPLAY RETURNS TO THE CURRENT TIME AFTER ABOUT 5 SECONDS. - TURN VOLUME KNOB (27) TO ADJUST THE VOLUME. TO Pause Resume play after pause Locate the beginning of the current track Locate the next track Go back at high speed Go forward at high speed Stop play
Press CD (24) CD (24) again BACK (17) ** NEXT (19) ** Hold down BACK Hold down NEXT Stop (23)
PROGRAM PLAY MODE YOU CAN PROGRAM THE PLAYING ORDER OF UP TO 20 TRACKS ON A CD. - PRESS CD "STOP" BUTTON (23). - PRESS PROG (15) BUTTON. ("PROG" FLASHES IS DISPLAY) - PRESS NEXT OR BACK TO SELECT THE TRACK YOU WANT TO PROGRAM, AND PRESS PROG. REPEAT THIS STEP, A MAXIMUM OF 20 TIMES, SELECTING A TRACK NUMBER TO BE PLAYED IN EACH STEP: PROG
(17) ** (19) **
** THESE OPERATIONS ARE POSSIBLE DURING BOTH PLAY AND PAUSE. • DURING CD PLAYBACK, EVERY TIME YOU PRESS DISPLAY KEY, THE LED DISPLAY WILL SWITCH BETWEEN DISPLAYING "TIME" & "CD TRACK NO". MUSIC DISCS ENCODED WITH COPYRIGHT PROTECTION TECHNOLOGIES THIS PRODUCT IS DESIGNED TO PLAY BACK DISCS THAT CONFORM TO THE COMPACT DISC (CD) STANDARD. RECENTLY, VARIOUS MUSIC DISCS ENCODED WITH COPYRIGHT PROTECTION TECHNOLOGIES ARE MARKETED BY SOME RECORD COMPANIES. PLEASE BE AWARE THAT AMONG THOSE DISCS, THERE ARE SOME THAT DO NOT CONFORM TO THE CD STANDARD AND MAY NOT BE PLAYABLE BY THIS PRODUCT. TO HANDLE COMPACT DISCS - HANDLE THE DISC BY ITS EDGE. - DO NOT TOUCH THE SURFACE. - DO NOT STICK PAPER OR TAPE NOR WRITE ANYTHING ON THE SURFACE. NOTES • DISCS WITH NON-STANDARD SHAPES (E.G., HEART, SQUARE, STAR) CANNOT BE PLAYED ON THIS UNIT. ATTEMPTING TO DO SO MAY DAMAGE THE UNIT. DO NOT USE SUCH DISCS. • IF THERE IS NO DISC IN THE CD COMPARTMENT, "CD --" FLASHES FOR ABOUT 10 SECONDS AND SHOW “NO CD” ON THE DISPLAY.
E-5
VARIOUS MODES OF CD PLAYBACK REPEAT MODE YOU CAN PLAY TRACKS REPEATEDLY IN SEVERAL MODES. THE PLAY MODE CHANGES AS FOLLOWS: NORMAL PLAY (REPEAT 1/ ALL LED : OFF): ALL THE TRACKS ARE PLAYED ONCE. PRESS REPEAT BUTTON ONCE (REPEAT 1/ ALL LED WILL "FLASH". THIS WILL ACTIVATE THE "REPEAT 1 TRACK" MODE (THE CURRENT TRACK WILL PLAY REPEATEDLY). PRESS REPEAT BUTTON AGAIN (REPEAT 1/ ALL LED STAYS "ON" CONTINUOUSLY). THIS WILL ACTIVATE THE "REPEAT ALL TRACKS" MODE. THE ENTIRE CD WILL PLAY REPEATEDLY.
PLAYING ORDER
PROGRAMMED TRACK
- PRESS "PROG" BUTTON (15) FOLLOWED (WITHIN 3 SECONDS) BY "CD PLAY" BUTTON (24) TO START PLAYING THE PROGRAMMED SEQUENCE OF TRACKS. IMPORTANT: IF NO BUTTON IS PRESSED FOR 5 SECONDS DURING PROGRAM MODE THE DISPLAY GOES BACK TO "CLOCK" MODE. HOWEVER, YOUR PROGRAM HAS ALREADY BEEN SAVED & YOU CAN CONTINUE PROGRAMING BY PRESSING "PROG" REPEATEDLY UNTIL THE LAST PROGRAMMED TRACK IS DISPLAYED, OR YOU CAN PLAYBACK THE STORED PROGRAM BY PRESSING "PROG" BUTTON, FOLLOWED (WITHIN 3 SECONDS) BY "PLAY" BUTTON. NOTE: TO DELETE A SAVED PROGRAM, PRESS "PROG" FOLLOWED (WITHIN 3 SECONDS) BY "CD STOP" (23) BUTTON. TO CANCEL PROGRAM PLAY PRESS "CD STOP" (23), “PROG” DISAPPEARS IN THE DISPLAY. TO CHANGE THE CURRENT PROGRAM PRESS STOP ONCE IF THE CD IS STOPPED AND TWICE IF THE CD IS PLAYING. THE CURRENT PROGRAM WILL BE ERASED. THEN CREATE A NEW PROGRAM FOLLOWING THE PROGRAMING PROCEDURE.
E-6
PLAYING THE RADIO - PRESS ALARM OFF/POWER BUTTON AND "RADIO/ BAND" (23) BUTTON TO TURN ON THE RADIO. THE "AM/FM" INDICATION WILL LIGHT UP. - ADJUST VOLUME. - PRESS "RADIO/ BAND" BUTTON TO SELECT THE BAND. - TUNE IN A STATION USING THE TUNING DIAL, THE STATION IS SHOWN ON THE DIGITAL DISPLAY. • TO TURN OFF THE RADIO, PRESS ALARM OFF/POWER. NOTE: THE DISPLAY REVERTS TO "CLOCK" MODE 5 SECONDS AFTER YOU STOP ROTATING THE TUNING KNOB.
IMPROVING THE RECEPTION FM: EXTEND THE FM WIRE ANTENNA TO IMPROVE RECEPTION. AM: ROTATE THE UNIT HORIZONTALLY FOR OPTIMUM RECEPTION. A FERRITE BAR ANTENNA IS BUILT INTO THE UNIT. DO NOT OPERATE THE UNIT OVER A STEEL DESK OR METAL SURFACE, AS THIS MAY LEAD TO INTERFERENCE OF RECEPTION.
SETTING THE ALARM THIS CLOCK RADIO IS EQUIPPED WITH 3 ALARM MODES-CD, RADIO AND BUZZER. BEFORE SETTING THE ALARM, MAKE SURE TO SET THE CLOCK (SEE "SETTING THE CLOCK"). THIS UNIT IS ALSO EQUIPPED WITH A DUAL ALARM FUNCTION. YOU CAN SET THE ALARM FOR TWO DIFFERENT TIMES (ALARM-1 AND ALARM-2). TO SET THE "BUZZER ALARM" 1. PRESS ALARM 1 (14) OR ALARM 2 (16) FOR A FEW SECONDS. THE ALARM 1 OR ALARM 2 INDICATOR FLASHES, DEPENDING ON WHICH ONE YOU SELECTED. THE HOUR WILL START TO FLASH IN THE DISPLAY. 2. PRESS NEXT OR BACK UNTIL THE DESIRED WAKE-UP HOUR APPEARS. TO SET THE HOUR RAPIDLY, HOLD DOWN NEXT OR BACK. 3. PRESS ALARM (14 OR 16). THE MINUTE WILL FLASH. 4. REPEAT STEP 2 TO SET THE MINUTE AND PRESS ALARM (14 OR 16) . 5. WHEN “BU --” FLASHES IN THE DISPLAY, PRESS ALARM (14 OR 16) AGAIN TO CONFIRM. ("BU" MEANS "BUZZER ALARM"). TO SET THE "CD ALARM" REPEAT STEPS 1 TO 5 TO SET THE ALARM TIME. AFTER “BU --” FLASHES ON THE DISPLAY, PRESS "CD PLAY" (24), THE “CD 01” FLASHES ON THE DISPLAY. PRESS NEXT OR BACK TO SELECT THE DESIRED WAKE-UP TRACK NUMBER AND PRESS ALARM (14 OR 16) AGAIN. THE WAKE-UP TRACK NUMBER CAN BE SET UP TO 99. ITS DEFAULT VALUE IS "01". FOR THE CD ALARM, THE TRACK YOU SPECIFIED AS THE WAKE-UP TRACK IS PLAYED FIRST. REMEMBER TO SET THE CORRECT VOLUME LEVEL.
E-7
TO SET THE RADIO ALARM REPEAT STEPS 1 TO 5 TO SET THE ALARM. AFTER “BU --” FLASHES ON THE DISPLAY, PRESS "RADIO BAND" BUTTON (23), THE “F- A-” FLASHES ON THE DISPLAY. PRESS ALARM (14 OR 16) AGAIN. THE ALARM 1 OR ALARM 2 INDICATOR LIGHTS UP. REMEMBER TO TUNE IN THE DESIRED STATION & SET THE CORRECT VOLUME LEVEL. TO CHECK THE ALARM TIME PRESS ALARM 1 (14) OR ALARM 2 (16). THE DISPLAY SHOWS THE ALARM TIME. IF YOU PRESS ALARM 1 OR ALARM 2 AGAIN, THE INDICATION CHANGES TO THE WAKE-UP TRACK NUMBER . AFTER A FEW SECONDS, THE DISPLAY RETURNS TO THE CURRENT TIME. IMPORTANT: FOR THE "CD ALARM", THE TRACK YOU SPECIFIED AS THE WAKE-UP TRACK IS PLAYED FIRST. IF YOU SET THE CD ALARM WHEN THERE IS NO DISC IN THE CD PLAYER OR THE CD COMPARTMENT LID IS OPEN, THE BUZZER ALARM WILL SOUND AT THE SET TIME. FOR THE RADIO ALARM, THE STATION THAT THE TUNING DIAL IS SET TO WILL BE RECEIVED. FOR THE BUZZER ALARM, THE BEEPING OF THE ALARM BECOMES MORE RAPID AFTER EVERY FEW SECONDS IN THREE PROGRESSIVE STAGES. NOTE WHEN ALARM 1 AND ALARM 2 ARE SET WITH THE EXACT SAME ALARM TIME, ONLY ALARM 1 WILL BE EFFECTIVE. TO DOZE FOR A FEW MORE MINUTES PRESS SNOOZE. THE CD, RADIO OR BUZZER ALARM TURNS OFF BUT WILL BE AUTOMATICALLY ACTIVATED AGAIN AFTER ABOUT 6 MINUTES. WHEN YOU PRESS SNOOZE AFTER THE CURRENT TIME APPEARS, THE SNOOZE TIME STARTS FROM 6 MINUTES AGAIN. • THE MAXIMUM LENGTH OF THE SNOOZE TIME IS 60 MINUTES. ALARM DURATION: THE ALARM IS TURNED OFF AUTOMATICALLY AFTER 60 MINUTES. TO STOP THE ALARM PRESS ALARM OFF/POWER (12) TO TURN OFF THE ALARM. THE ALARM WILL COME ON AGAIN AT THE SAME TIME THE NEXT DAY TO DEACTIVATE THE ALARM PRESS ALARM 1 (14) OR ALARM 2 (16) THREE TIMES RAPIDLY, THE ALARM 1 OR ALARM 2 INDICATOR WILL GO OFF.
E-8
SETTING THE SLEEP TIMER YOU CAN FALL ASLEEP TO THE RADIO OR CD USING THE BUILT-IN SLEEP TIMER THAT TURNS OFF THE CD OR THE RADIO AUTOMATICALLY AFTER A PRESET DURATION. PRESS SLEEP DURING CD OR RADIO PLAY. YOU CAN SET THE SLEEP TIMER TO DURATIONS OF 90 TO10 MINUTES. EVERY PUSH CHANGES THE DISPLAY AS FOLLOWS:
OFF
90
80
70
60
50
40
30
20
10
THE CD OR THE RADIO WILL PLAY FOR THE TIME YOU SET, THEN SHUT OFF. • TO TURN OFF THE CD OR RADIO BEFORE THE PRESET TIME, PRESS ALARM OFF/POWER. TO USE BOTH THE SLEEP TIMER AND THE ALARM YOU CAN FALL ASLEEP TO THE CD OR THE RADIO AND BE AWAKENED BY THE CD, RADIO OR BUZZER ALARM. - SET THE ALARM. (SEE "SETTING THE ALARM".) - SET THE SLEEP TIMER. (SEE "SETTING THE SLEEP TIMER".)
SPECIFICATIONS
~
POWER SUPPLY : ..................................... AC230V , 50Hz FOR CLOCK BACK UP: DC 9V - - - (6F22/006P) (BATTERIES NOT INCLUDED) POWER CONSUMPTION : ........................ 15W OUTPUT POWER PER CHANNEL : ............ 1W (1W + 1W) FREQUENCY : .......................................... AM 530 - 1600 kHz FM 88 - 108 MHz THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SHALL BE PLACED ON THE APPARATUS.
THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE, THE DISCONNECT DEVICE SHALL REMAIN READILY OPERABLE.
E-9
