12 Month Warranty

Transcript

hand tools welding compressors air tools Great Brands • Great Value generators garage equipment power tools www.justtools.co.za locksets safes ladders power garden FOR STORE DETAILS SEE BACK PAGE garden tools CONTENTS HAND TOOLS.............................................................................................................................. 2-14 WELDING ...................................................................................................................................... 15-20 COMPRESSORS........................................................................................................................... 21-24 AIR TOOLS...................................................................................................................................... 25-32 GENERATORS............................................................................................................................... 33 GARAGE EQUIPMENT.............................................................................................................. 34-36 POWER TOOLS.......................................................................................................................... 37-43 LOCKSETS.................................................................................................................................... 44 SAFES................................................................................................................................................ 45 LADDERS......................................................................................................................................... 45-47 POWER GARDEN........................................................................................................................ 48-49 GARDEN TOOLS....................................................................................................................... 50-52 CONTENTS Great Brands • Great Value 1 hand tools hand tools AUTOMOTIVE TOOLS SPECIALISED TOOLS Socket Set Metal Case 1/2 Socket Set Metal Case 3/8 Hex Socket Set Socket Set Metal Case 1/4 12 Piece YT-12621 23 Piece YT-12651 25 Piece YT-12671 Hex Deep Socket 1/2” Roller Cabinet 7 Drawer Roller Cabinet 7 Drawer + 1 Cabinet YT-09141 177 Piece Tool Set Roller Cabinet YT-5530 211 Piece Tool Set Roller Cabinet YT-55290 YT-09140 82 Piece Tool Set 1/4” & 1/2” YT-1269 29 Piece Tool Set Household YT-39001 8mmx76mm 9mmx76mm 10mmx76mm 11mmx76mm 12mmx76mm 13mmx76mm 14mmx76mm 15mmx76mm 16mmx76mm 17mmx76mm 18mmx76mm 19mmx76mm 20mmx76mm 21mmx76mm 22mmx76mm 23mmx76mm 24mmx76mm 27mmx76mm 30mmx76mm 32mmx76mm 63 Piece Tool Box C/Lever With Tools YT-1221 YT-1222 YT-1223 YT-1224 YT-1225 YT-1226 YT-1227 YT-1228 YT-1229 YT-1230 YT-1231 YT-1232 YT-1233 YT-1234 YT-1235 YT-1236 YT-1237 YT-1238 YT-1239 YT-1240 Hex Socket 1/2” 8mmx38mm 9mmx38mm 10mmx38mm 11mmx38mm 12mmx38mm 13mmx38mm 14mmx38mm 15mmx38mm 16mmx38mm 17mmx38mm 18mmx38mm 19mmx38mm 20mmx38mm 21mmx38mm 22mmx38mm 23mmx38mm 24mmx38mm 27mmx42mm 30mmx42mm YT-1201 YT-1202 YT-1203 YT-1204 YT-1205 YT-1206 YT-1207 YT-1208 YT-1209 YT-1210 YT-1211 YT-1212 YT-1213 YT-1214 YT-1215 YT-1216 YT-1217 YT-1218 YT-1219 7 Piece H4-H12 9 Piece H2-H12 15 Piece H4-H12 Torx Socket Set 7 Piece T25 - T55 15 Piece T20 - T55 15 Piece YT-38631 19 Piece YT-38641 YT-0412 YT-0432 YT-0413 YT-14411 YT-14421 15 Piece 23 Piece Torque Wrench YT-0410 YT-0411 1/2” 42-210 Nm Digital 2.00-203 YT-0760 YT-0762 YT-38950 79 Piece Tool Set Mechanics Case 14 Piece Socket Deep Set (8-21mm) YT-3892 YT-5539 Spark Plug Socket 1/2”x16x64mm 1/2”x21x64mm YT-1253 YT-1254 Socket Set Combination Spanner Set Work Lamp LED Under Bonnet 8 Piece Tool Set YT-08530 YT-3906 15 Piece Holesaw Set Combination Steel Measuring Tape 3x16mm 5x25mm 8x25mm YT-3381 YT-7150 YT-7152 YT-7153 12 Piece 8-24 17 Piece 8-32 25 Piece 6-32 YT-0362 YT-0363 YT-0365 YT-7435 Utility Knife Locking 3-Blade YT-7510 Cutting Knife Sk5 3-Blades YT-7520 Nail & Tool Pouch YT-7416 Lifetime guarantee on hand tools & tool boxes only. This excludes drill bit sets, punch sets, chisel sets, hex sets, needle file sets and hole saw sets 2 YATO TOOLS Great Brands • Great Value 20 Piece 3/4” YT-1335 8 Piece 1/4” 5.5-13mm YT-1439 20 Piece 1/4” YT-1449 31-Pocket Tool Carrier St/Tube 9 Piece Key Set Hex 1.5 10mm YT-0500 Torx T10-T50 YT-0511 Chisel & Punch Set 5 Piece CrV 6 Piece CrV YT-4695 YT-4712 17 Blade Feeler Gauge 0.02-1.0mm YT-7220 Digital Clamp Meter YT-73091 3 Piece Chisel Set 10/12/16mm CrV YT-4711 Lifetime guarantee on hand tools & tool boxes only. This excludes drill bit sets, punch sets, chisel sets, hex sets, needle file sets and hole saw sets YATO TOOLS Great Brands • Great Value 3 Circlip Plier Spanner Combination 6mm 7mm 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm 25mm 26mm 27mm 28mm 29mm 30mm Screwdriver Slotted YT-0335 YT-0336 YT-0337 YT-0338 YT-0339 YT-0340 YT-0341 YT-0342 YT-0343 YT-0344 YT-0345 YT-0346 YT-0347 YT-0348 YT-0349 YT-0350 YT-0351 YT-0352 YT-0353 YT-0354 YT-0355 YT-0356 YT-0357 YT-0358 YT-0359 3.0x 75mm 4.0x100mm 5.5x100mm 5.5x150mm 5.5x200mm 6.5x38mm 6.5x100mm 6.5x150mm 6.5x200mm 8.0x150mm YT-2601 YT-2606 YT-2608 YT-2609 YT-2610 YT-2612 YT-2613 YT-2614 YT-2615 YT-2618 8X10mm YT-0135 Ratchet Handle Quick Release 1/4”x145mm Ratchet Handle Quick Release 3/8”x205mm YT-2806 Ph0x75mm Ph1x75mm Ph1x100mm Ph1x150mm Ph1x200mm Ph2x38mm Ph2x100mm Ph2x150mm Ph2x200mm Ph2x250mm Ph3x150mm YT-2640 YT-2642 YT-2643 YT-2644 YT-2645 YT-2647 YT-2648 YT-2649 YT-2650 YT-2651 YT-2653 VDE Screwdriver (-)5.5X125mm (+) Ph1x80mm (+) Ph2x100mm 5 Piece 1000V YT-2818 YT-2822 YT-2823 YT-2827 150mm ext str 150mm ext bent 150mm int str 150mm int bent 200mm ext str 200mm ext bent 200mm int str 200mm int bent Flaring Spanner 42 Piece Ratchet Screwdriver & Socket Screwdriver hand tools hand tools WORKSHOP HANDTOOLS WORKSHOP HANDTOOLS Ratchet Handle Quick Release 1/2”x255mm YT-4519 YT-4520 YT-4521 YT-4522 450g Hammer Claw Tubular All-Steel YT-4560 YT-4570 6” 160mm YT-1940 7” 180mm YT-1941 8” 200mm YT-1942 Long Nose Plier 6” 160mm YT-1943 8” 200mm YT-1944 Water Pump D4 Plier YT-0320 250mm YT-2070 YT-0321 6” 160mm 7.5” 190mm 225g 450g 680g 900g Combination Plier YT-0319 Plier Diagonal Side Cutters Hammer Ball Pein Hickory Handle YT-2140 YT-2141 YT-2142 YT-2143 YT-2144 YT-2145 YT-2146 YT-2147 YT-1947 YT-1948 Lock Grip Plier 180mm CrV 240mm CrV Wire Stripping 6” Plier Wire Stripper & Crimper Heavy Duty Cable Cutter Adjustable Wrench 160mm YT-6609 205mm YT-2270 YT-2152 YT-2153 Hammer Ball Pein Fibre Glass Handle 225g 450g 680g 900g YT-4515 YT-4516 YT-4517 YT-4518 Butane Soldering Iron 25-80W YT-6705 230mm YT-1933 160mm 210mm 260mm 310mm YT-2170 YT-2171 YT-2172 YT-2173 Stoning Hammer YT-4550 YT-4553 1kg 2kg Pipe Wrench HSS Twist Drill Bit Sets 10" 250mm CrMo 14" 350mm CrMo 18" 450mm CrMo 24" 600mm CrMo 36" 900mm CrMo 10 Piece YT-4008 19 Piece YT-4009 7 Piece Screwdriver Slotted YT-5535 7 Piece Screwdriver Philips YT-2488 YT-2490 YT-2491 YT-2492 YT-2493 Long Hex Key 12 Piece 1.5mm 6 Piece 4mm YT-5840 YT-5844 10 Piece Needle File Set YT-5536 VDE Screwdriver 5 Piece 1000V YT-2827 440g Mallet Rubber Fibre Glass Handle YT-4594 430g Mallet Dead Blow Wooden Handle 3x140x65 YT-6163 5x180x85 YT-6165 YT-4625 9 Piece Number Punches 6mm x 66mm YT-6854 8mm x 73mm YT-6855 6mm x 65mm YT-6862 8mm x 72mm YT-6863 9 Piece Number Punches 6 Piece Screwdriver Set Magnet-Tip YT-2783 27 Piece Letter Punches 27 Piece Letter Punches Caliper Vernier Stain Steel 150mm Caliper Digital Vernier 150mm YT-7200 YT-7201 Lifetime guarantee on hand tools & tool boxes only. This excludes drill bit sets, punch sets, chisel sets, hex sets, needle file sets and hole saw sets 4 YATO TOOLS Great Brands • Great Value Heavy Duty Bench Vice Swivel 100mm 150mm YT-6501 YT-6503 3 Jaw Puller 3” 75mm 4” 100mm 6” 150mm 8” 200mm YT-2519 YT-2520 YT-2521 YT-2522 Puller Pilot Bearing 12 - 38mm YT-2510 Lifetime guarantee on hand tools & tool boxes only. This excludes drill bit sets, punch sets, chisel sets, hex sets, needle file sets and hole saw sets YATO TOOLS Great Brands • Great Value 5 hand tools hand tools SPANNERS, SOCKETS & ALLEN KEYS XXXXX PLIERS Great Brands • Great Value 12 Month Warranty Combination Plier 12 Month Warranty Mini Side Cutting Plier 200mm F10103 115mm F10902 Spanner Combination 6mm TOOS1580C 8mm TOOS1580AC 7mm TOOS1580BC 9mm TOOS1581C 10mm TOOS1582C 11mm TOOS1583C 12mm TOOS1584C 13mm TOOS1585C 14mm TOOS1586C 15mm TOOS1587C 16mm TOOS1587B 17mm TOOS1588C 18mm TOOS1589C 19mm TOOS1590C 20mm TOOS1591C 21mm TOOS1592C 22mm TOOS1593C 23mm TOOS1594C 24mm TOOS1595C Spanner Combination 6mm F15306 7mm F15307 8mm F15308 9mm F15309 10mm F15310 11mm F15311 12mm F15312 13mm F15313 14mm F15314 15mm F15315 16mm F15316 17mm F15317 18mm F15318 19mm F15319 20mm F15320 21mm F15321 22mm F15322 23mm F15323 24mm F15324 25mm F15325 26mm F15327 28mm F15328 30mm F15330 32mm F15332 5 Piece Mini Plier Set 5 Piece Spanner Set Combination 10,11,12,13,14mm TOOS1817 8,9,10,11,12,13,14,17mm TOOS1852 6-22mm TOOS1611 12 Piece Spanner Set Combination 8,9,10,11,12,13,14,15,17, 19,21mm TOOS1851 6,7,8,9,10,11,12,13,14, 15,17,19mm TOOS1610 8 Piece Combination Spanner Set 8,9,10,11,12,13,14,17mm F15402 6 Piece Combination Ratchet Spanner Set 8,10,12,13,14,17mm F15407 11 Piece Socket Set 3/8” Drive 7 Piece Ratchet Spanner Set 1/2” F16121 Socket Set 11pc 1/2” Drive 8,10,12,13, 14,15,18mm F85124 9 Piece Key Security Torx Set (Long) T10-T50 TOOK1010 9 Piece Key Hex Set Ball End 1.5-10mm F20707 6 T10-T50 TOOK1020 7 Piece Key Hex Set Ball-point 2.5-10mm TOOK1035 8 Piece Key Hex Set 150mm TOOS1774 200mm TOOS1775 300mm TOOS1777 250mm F1410 3 Piece Plier Set 150mm Comb Plier 150mm Long Nose Plier 150mm Side Cutting Plier Insulated Hand Grips TOOP1403/P Plier Circlip Outside Bent Plier Long Nose Dipped Handle 180mm TOOP1406A 150mm TOOP1414 3 Piece Plier Set 200mm Combination Plier 150mm Long Nose Plier 150mm Side Cutting Plier TOOP1403 200mm TOOP1430 150mm TOOP1434 Plier Circlip Inside Bent Plier Circlip Outside Straight 230mm TOOP1472 230mm TOOP1474 230mm TOOP1473 Plier Circlip Inside Straight 230mm TOOP1475 VDE Plier Combination VDE Plier Side Cutting VDE Plier Long Nose 200mm F11032 180mm F11014 1/16”-3/8” TOOK1015 1.5-10mm TOOK1016 25 Piece Key Hex Set 1.27-10mm 0.05”-3/8” TOOK1017 30 Piece Key Hex Set Wrench 0.7-10mm 0.028”-3/8” TOOK1019 FRAGRAM HAND TOOLS Great Brands • Great Value Plier Fencing Dipped Handle 200mm F11003 10 Piece Key Hex Set 1/16”-1/4” TOOK1013 1.5-6mm TOOK1014 180mm F10204 Fencing Plier Spanner Shifting 10,11,12,13,14,15,17,19, 22,24mm F16204 9 Piece Key Torx Set Wrench Side Cutting Plier Dipped Handle 250mm TOOP1410 300mm TOOP1411 10,11,12,13,14, 15,16,17,19,22mm F16202 Rachet Handles 180mm F10301 200mm F10302 8” Comb Plier 6” Long Nose Plier 6” Side Cutting Plier F85101 Plier Combination Dipped Handle 150mm TOOP1428 200mm TOOP1429 19 Piece Spanner Set Combination 6,7,8,9,10,11,12,13,1 4,15,16,17,19,21,22, 24,27,30,32mm TOOS1855 Long Nose Plier 10,12,13,15,17,19mm TOOS1631 8 Piece Spanner Set Combination 17 Piece Spanner Set Combination 11 Piece Spanner Set Combination 180mm F10202 Heavy Duty Side Cutting Plier 3 Piece Plier Set 115mm F85102 6 Piece Spanner Set Single-flex Side Cutting Plier Water Pump Plier 250mm F11401 Water Pump Plier Dipped Handle 250mm TOOP1469 Locking Round Nose Plier Vice Grip 175mm TOOV3550 240mm F11603 FRAGRAM HAND TOOLS Great Brands • Great Value 7 PLIERS & HAMMERS 12 Month Warranty 12 Month Warranty 5 Piece Plier Circlip Snap Ring Screwdrivers Slotted Interchangeable head allows for the removal & installation of most types & locations of circlips 160mm TOOP1451 103 Piece Grommet Installation Kit Plier Revolving Heavy Duty Plier Eyelet & Punch 2 Way Plier For Eyelets With spare eyelets TOOP1330 TOOP1301 100 Piece Crimping Terminal Set Heavy Duty Crimping Plier TOOP1332 200mm TOOC105 200mm TOOP1333 Crimping Tool Hdi-6 230mm TOOC98 Crimping Plier 225mm F11704 200mm TOOC103A Bolt Cutter 200mm 450mm 600mm 750mm 450mm F12012 600mm F12013 TOOB25 TOOB26 TOOB27 TOOB28 Tinsnip With Spring 250mm F30805 200mm F30818 300mm F30819 Pipe Wrench 6 Piece Screwdriver Set Soft Grip Hardened black magnetic tip TOOS1646 TOOS1646/P Hammer Claw Tubular Handle Drop-Forged head Rubber grip handle 500g TOOH862 8 Hammer Claw 16 Oz F25101 Wooden handle 100g TOOH826 200g TOOH827 300g TOOH828 500g TOOH829 700g TOOH830 900g TOOH831 Hammer Claw Fibreglass Handle Drop-Forged head Rubber grip handle, 500g TOOH820 225g TOOH750 450g TOOH751 565g TOOH752 Hammer Ball-pein Hammer Club Wooden Handle Drop-forged head Rubber grip handle 1.8kg TOOH847 Hammer Claw Reinforced fibre glass shaft with plastic cover 455g F25104 Hammer Club 2-Col Handle 2lb TOOH753 4lb TOOH754 FRAGRAM HAND TOOLS Great Brands • Great Value Electrician Screwdriver 3.2x 75mm 3.2x 100mm 3.2x 150mm 4x 100mm 4x 150mm 6x 100mm 6x 150mm TOOS1000C TOOS1001C TOOS1001D TOOS1002C TOOS1003C TOOS1004C TOOS1005C Screwdriver Set 6 in 1 TOOS1642 Philips Screwdriver No.0x75 mm No.1x75 mm No.2x100 mm No.2x150 mm No.2x250 mm No.3x150 mm TOOS1015C TOOS1016C TOOS1017C TOOS1014C TOOS1012F TOOS1018C 6 Piece Screwdriver Set Electron plating finish against corrosion F85114 6 Piece Screwdriver Set LineColour TOOS1953 300mm F50104 Screwdriver Set with Holder Precision Screwdriver Set 5 Piece TOOS1638 6 Piece TOOS1639 26 Piece TOOS1881 6 Piece Screwdriver Set Precision Box Ergonomic handle for fast turning, Innovative storage box for ease of handling F20525 10 Piece Blade Snap Off Large 8 Piece Electrician Screwdriver Set TOOK1023 Insulated shaft TOOS1648 5 Piece Fixed Blade Trimming TOOK1025A 8 Piece Knife Utility Set Knife Utility Super Auto F30601 Drop-Forged head 500g TOOH821 TOOK1029 File Round Steel 2nd Cut 200mm 250mm F30123 F30124 Rasp Wood Flat 500g TOOM1258 Knife Utility Quick Change Knife Trimming Fixed Blade TOOK1034 File Triangular 2nd Cut 150mm 200mm 150mm 200mm 250mm Half Round F30140 F30141 Knife Utility Folding Lockable 12mm F26104 Scissors Multi Function TOOS1965 Includes 5 blades TOOK1102 Poly Handle File Set 4 Piece TOOF568A 6 Piece TOOF569 200mm Oil Stone File Half Round 2nd Cut 200mm 250mm F30114 F30115 File Needle Set F30104 F30105 F30106 10 Piece TOOF567 250mm F30205 Chisel Wood TOOK1031 F30631 File Flat Steel 2nd Cut 200mm F30201 250mm F30202 Mallet Rubber Steel Shaft F30621 TOOK1027 Knife Craft Hobby Set 13 Piece Hammer Claw Solid Steel Shaft Knife Snap Off Blade 9mm Knife Trimming Retractable Blade TOOK1024 Drop-forged head 500g TOOH819 TOOS1008C TOOS1009C TOOS1010C TOOS1012D 5x75mm 5x100mm 6x100mm 6x200mm TOOC107 Bolt Cutter Drop Forged Handle Hammer Claw 2 Colour Handle Mechanics Screwdriver Ph0x75mm F20320 Ph0x200mm F20323 Ph1x75mm F20324 Ph1x150mm F20326 Ph1x250mm F20328 Ph2x100mm F20330 Ph2x150mm F20331 Ph2x200mm F20332 Ph3x150mm F20335 Ph3x200mm F20336 Ph3x250mm F20337 Knife Utility Snap-off Blade Hammer Claw Wooden Handle Screwdrivers Philips 3x75mm F20301 3x100mm F20302 3x150mm F20303 5x100mm F20306 5x150mm F20307 5x200mm F20308 5x250mm F20309 5x300mm F20310 6x100mm F20311 6x150mm F20312 6x200mm F20313 6x250mm F20314 6x300mm F20315 8x150mm F20316 8x200mm F20317 8x250mm F20318 8x300mm F20319 6 Piece Screwdriver Black Tip 30 Piece Crimping Tool Set hand tools hand tools SCREWDRIVERS/ KNIVES/FILES & CHISELS 4 Piece Chisel Firmer Set 6,12,19, 25mm TOOC183 Chisel Wood Plastic handle Used for sharpening TOOS1733 6mm TOOC200 10mm TOOC201 12mm TOOC202 16mm TOOC203 20mm TOOC204 25mm TOOC205 4 Piece Chisel Wood Blue Sharp 6,12,18,24mm TOOC184 12 Piece Wood Carving Set TOOW4223 FRAGRAM HAND TOOLS Great Brands • Great Value 9 hand tools hand tools SAWS/RIVETERS & TILING BUILDING 12 Month Warranty Hacksaw 300mm Hacksaw Junior 150mm TOOH801 F30562 12 Month Warranty Hacksaw 300mm Hand Saw Poly Handle Hacksaw Plastic Handle TOOH802 Handsaw Hacksaw Professional Heavy Duty F30568 Junior Hacksaw 150 mm TOOH804 Saw Coping 175mm 510 mm x 10tpi 550 mm x 10 tpi 600 mm x 8 tpi 650 mm x 7tpi Backsaw Wooden Handle 300mmx10Tpi TOOS1716 F30401 F30403 F30404 400mm x 7tpi 500mm x 7tpi 550mm x 7tpi High Tension Frame TOOH806 TOOS1761 Trowel Brick Ruby Red Handle Trowel Brick Wooden Handle 280mm TOOT2532A 300mm TOOT2533A 270mm TOOT2533D 300mm TOOT2533C 24T TOOB75B Rivets Aluminium 100’s 4.0mm TOOR1670 4.8mm TOOR1671 3.2x10 mm TOOR1652 3.2x12 mm TOOR1653 4.0x8 mm TOOR1657 4.0x10mm TOOR1658 4.0x12 mm TOOR1659 4.0x15 mm TOOR1660 4.8x8 mm TOOR1663 4.8x10 mm TOOR1664 4.8x12mm TOOR1665 4.8x15mm TOOR1666 4.8x18mm TOOR1667 4.8x21mm TOOR1668 6mm x 10mm x 1000 TOOS1841 8mm x 10mm x 1000 TOOS1842 10mm x 10mm x 1000 TOOS1843 Dries in 60-seconds Trigger feed 30W TOOG704 50W TOOG700A Tile Cutter Solid racks, Heavy duty rubber cushion, 400mm TOOT2525 Tile Cutter 3 Function Hole cutting from 30-80mm Heavy duty pressed steel base 400mm TOOT2521 Tile Nipper Pliers 2 mm 3 mm 5 mm 10 225mm/310g TOOG706 12 Piece Glue Sticks Trowel Nosing Grano Jointer I.Groove 150mm x 75mm TOOT2904 65mm x 145mm TOOT2905 Jointer Brick Cross Square Jointer Brick Cross Round 8mm TOOT2906 Floor Sanding Roll 1 Metre Fine 100g TOOS4009 Medium 80g TOOS4010 Coarse 40g TOOS4011 Trowel Inside Cove 150mm TOOT2920 Trowel Outside Cove 150mm TOOT2921 Jointer Brick Square Long 8mm TOOT2907 8mm TOOT2909 TOOT2927 Trowel Outside Sharp 75mm 245x154 Fine 150 Grit TOOS4000 Medium 120 Grit TOOS4001 Coarse 60 Grit TOOS4002 Sand Paper Cabinet Assorted 4 Piece TOOS4003 Trowel Inside Sharp 150mm TOOT2922 Trowel Cove Outside Trowel Outside Sharp 150mm 75mm TOOT2926 TOOT2923 Paint Scraper Wood TOOT2928 Air Vent Internal White Plastic 8mm TOOG701 Sand Paper Water 4 Piece Fine P800 TOOS4005 Medium P360 TOOS4006 Coarse P180 TOOS4007 Sand Paper Water Assorted 4 Piece Assorted TOOS4008 FRAGRAM HAND TOOLS Great Brands • Great Value 8mm TOOT2908 75mm Sand Paper Cabinet 4 Piece 225mm/380g F45402 150mm TOOT2900 175mm TOOT2901 200mm TOOT2902 300mm x 300mm TOOT2534B Jointer Brick Round Long Trowel Inside Sharp 12mm TOOG698 Gun Chalking Skeleton Trowel Gauging TOOT2609A TOOT2610 TOOT2610B 6 Piece Glue Sticks Gun Chalking Skeleton 350 x 120mm TOOT2534 Tile Spacer 100 Pieces Heavy duty, 200 mm TOOT2528 TOOG705 Trowel Flooring Wooden Handle Hawk Plastering Aluminium 290mm x 290mm TOOT2534A 290mm x 110mm TOOT2535 Staples Glue Gun Hot Melt Gun Caulking Light Duty 290mm x 120mm TOOT2535A TOOR1490 Rivet Washers 100’s TOOG703 6mm x 6mm TOOT2533 8mm x 8mm TOOT2532C 10mm x 10mm TOOT2532B Trowel Plastering Wooden Handle Riveter Hand All Steel TOOR1484 Gun Caulking Pro Heavy Duty Trowel Plastering Plastic Handle TOOR1486 Riveter Hand Concertina 8mm Staples x 1000 12mm Staples x 1000 TOOS1840 Trowel Knotched Plastic Handle Riveter Hand 250mm 2.4-4.8mm TOOR1485 Staple Gun With Staples Hawk Plastering Plastic 4 Interchangeable heads for 2.4, 3.2, 4.0, 4.8mm rivets F45602 Riveter Kit with Rivets 150mm TOOT2535B 175mm TOOT2535D 200mm TOOT2535C TOOS1975 TOOS1970 TOOS1971 TOOS1972 Riveter Hand 4-head 6 Piece Blade Hacksaw Trowel Pointing Wooden Handle Float Wooden 310 x 110mm TOOW4203 TOOA2 100mm 55mm TOOA3 Block Mould 150mm TOOB01 200mm TOOB02 TOOW4203A 30mm 50mm 70mm 90mm TOOS1940 TOOS1943 TOOS1941 TOOS1942 Bolster Brick Air Vent External Brown Plastic 213x150 Float Plastic Black TOOB110 TOOB111 Chisel Cold Bar Wrecking 450mm 600mm TOOB106 TOOB107 20 X 250mm 20 X 200mm 25 X 250mm 25 X 300mm TOOC167A TOOC168A TOOC169A TOOC170A 3 Piece Scraper Set 25/50/75mm F85123 FRAGRAM HAND TOOLS Great Brands • Great Value 11 12 Month Warranty 12 Month Warranty Line Builders 30m Chalk Line Body TOOC195 TOOC195A Metal Plastic Red Blue TOOC195F TOOC195G Glass Cutter 0.85mmx100m, 70lb TOOL1156 0.70mmx100m, 50lb TOOL1156A 1mmx100m, 90lb TOOL1158 3 Piece Chalk Line Kit 200g Chalk Line Refill hand tools hand tools CLAMPS/TOOLKITS & SAFETY WEAR BUILDING & PAINTING TOOC198 Single Wheel TOOG720 Heavy Duty Clamp TOOC151 TOOC153 TOOC154 100mm 150mm 200mm 3 Piece Clamp G Set 25,50,75mm TOOC357 Corner Clamp TOOC161 100mm Wood Aluminium Clamp 600mm TOOC175 Vice Bench Fixed Base Vice Drill Press 75mm TOOD389 100mm TOOD390 100mm TOOV3573 Soldering Iron Level Torpedo Magnetic Base Level Aluminium 3-Vial 225mm F35241 225mm TOOL1107 400mm 600mm 900mm 1000mm 1200mm Level Aluminium 2-Vial 300mm 500mm 600mm 750mm 1000mm 1200mm F35201 F35203 F35205 F35206 F35207 TOOL1182 TOOL1183 TOOL1184 TOOL1187 TOOL1185 TOOL1186 40W TOOS1695 60W TOOS1706 80W TOOS1707 100W TOOS1691 Gas Welding Torch with Lever 1000mm Heavy Duty Aluminium Spirit Level 60mm TOOS1689 Soldering Gun Soldering Iron Kit 30 W TOOT2910 TOOT2911 Carpenters Brace 2 Jaw 4 Jaw TOOB53 TOOB61 Mitre Box Plastic 135mm x 250mm TOOM1200 TOON1256 5 Piece Brush Paint Set TOOB113 Magnetic Tape Measure 3m x 16mm TOOT2353 5m x 19mm TOOT2354 8m x 25mm TOOT2355 Reuseable Corded TOOE504 Disposable Corded TOOE505 Tape Measure 3m x 13mm TOOT2546 5m x 16mm TOOT2547 7.5m x 25mm TOOT2348 Ear Muffs TOOE502 TOOT2027 3-28mm F50301 Stainless Steel Ruler 300mm TOOR1473C 600mm TOOR1474C 1000mm TOOR1475 12 Nylon Vernier Caliper 150mm TOOG770 TOOG771 TOOG772 TOOG773 Hard Hat Filtering Half Mask FFP1(5PC) TOOM1208 FFP1(20PC) TOOM1209 10m TOOT2553B 20m TOOT2553A 30m TOOT2553 Orange Reflective Bib 300mm TOOS1702 150mm TOOS1711 Yellow Reflective Vest One Size TOOV3404 Medium TOOV3405 Large TOOV3406 X-Large TOOV3407 XX-Large TOOV3408 Yellow Reflective Bib One Size TOOV3409 Steel Blade Combination Square TOOC232 Square Rafter 400mm x 600mm TOOS1703 Square Carpenter 200mm x 300mm TOOS1704 Tri Square 200mm TOOS1736 Blue Yellow White Red TOOH100 TOOH101 TOOH102 TOOH103 Medium TOOV3400 Large TOOV3401 X-Large TOOV3402 XX-Large TOOV3403 Fibre Glass Tape Surveyor Square Combination 300mm TOOS1701 Square Combination Cast Iron Base 300mm TOOS1710 FRAGRAM HAND TOOLS Great Brands • Great Value Clear S/Style Clear Style Green Grey Orange Reflective Vest Combination Square Pipe Cutter Safety Spectacles TOOB114 3m x 16mm F30941 5m x 19mm F30942 8m x 25mm F30943 TOOC338 Toolbox 5-tray Cantilever 410x200x200mm TOOT2580 No.3 - 200mm TOOP1356A No.4 - 225mm TOOP1357A No.5 - 350mm TOOP1358A Brush Block Tape Measure 4 Way Vernier Caliper 75g TOOS1693 Ear Plug Plumbers Tape 150mm 435x 240x 275mm TOOT2604 TOOS1509 Plane Jack Brush Paint 25mm TOOB12 19mm TOOB12A 12mm TOOB12B 38mm TOOB13 50mm TOOB14 63mm TOOB15 100mm TOOB15A 75mm TOOB16 125mm TOOB16A Solder Flux Toolbox 4 Compartment DIY 3 Piece Toolkit Nail Bag Leather TOOS1692 6 Piece TOOP1353 2 Piece TOOP1354 TOOT2580 Spare Rotor for Tyrolene Machine 250g Pencil Carpenters 1000mm TOOL1193 81 Piece Househould Toolkit Tyrolene Machine Solder Acid Core 100W TOOS1694 TOOS1695A Knit Wrist PVC Red Gloves Knit wrist TOOG726 Gloves Cotton knit wrist TOOG753 Gloves Workers candy stripe TOOG725A Elbow PVC Red Gloves TOOG726A Safety Face Sheild TOOG774 Builders Gloves Black rubber, Large TOOG757 FRAGRAM HAND TOOLS Great Brands • Great Value 13 hand tools AUTOMOTIVE 12 Month Warranty welding MMA (STICK) WELDERS & 12 Month Warranty ACCESSORIES 12 Month Warranty Booster Clamp 500A Red TOOB43 500A Black TOOB44 Booster Cable Set 120 AMP* TOOB47 200 AMP* TOOB94 Booster Clamps 100A - Pair TOOB49 6 Piece Alligator Clips Zinc Plated TOOB49A 2 Piece Battery Clip Sets Battery Terminal Set Zinc Plated 50A TOOB52 MMA160S 2 Piece TOOB81 Cable Ties Black 100’s 104x2.5 TOOC122 150x3.5 TOOC123 198x4.7 TOOC125 419 Piece O Ring Metric 3-50mm TOOR1453 Sizes: 50,75,95,115 TOOF398 Straps Octopus 6 Claws 600mm TOOS1847 Compressor Air 12v 150psi 1.5 Ton TOOT2522 Tie Down 4 Piece All Purpose 25mmx2.5m TOOR1498 Tie Downs With Ratchet 28mm x 2.5m TOOR1494A 25mm x 4.5m TOOR1496 Output: 200 A / 60% Duty cycle Can weld up to 4.0mm electrodes Input 220V - 31.6 A DIY to Light engineering MCOW4099 ARC400S Tow Steel Rope 3.6m 1.5 Ton TOOT2524 TOOT2583 Tester Auto 6-24v Voltage TOOT2613 Pump Rotary Drum Type 210 litre TOOP1364 Measures, DC voltage, AC voltage, DC current & resistance TOOT2612 14 Patch Kit For Bicycle TOOP1349 TOOT2618 Tyre Inflator With Dial Jack Bottle 2 Ton + 8 Piece Hex Key Set TOOJ940 12 Bar TOOT2514 15 Bar TOOT2514A Sanding Blocks Rubber 4 Way Wheel Spanner 17,19,21,23mm TOOW4219 Valve Tool 4 Way TOOT2517 400cc TOOG719 MMA 200B IGBT Technology Output: 200A / 60% Duty cycle Input 220V - 31A DIY to Light engineering MCOW4093 Sponge Block 150x100x50mm TOOA190 4 Piece Microfibre Cloth Set Assorted TOOA191 1 Ton 2.5m Lift TOOC237 2 Ton 2.5m Lift TOOC239 Amber Revolving Lamp 12V, Magnetic base TOOL1167 Booster TOOP1418 Gauge TOOP1419 OPTIONAL Oil Can With Flexi Spout TIG Torch SR 17V x 4m EWTT00200 500g TOOO1280A Colour Rags White Mutton Cloth 250g 400g TOOM1264 TOOM1259 FRAGRAM HAND TOOLS Great Brands • Great Value Pump Hand Double Chain Block TOOS1903 Squeegees Plastic Handle 190mm TOOS1803 Aluminium Handle 250mm TOOS1800 4 Piece Tester Kit Home & Auto Output: 20-160A / 35% Duty cycle Input 220V - 27A LCD Display, Storage compartment for cables, Can weld up to 4.0mm electrodes MCOW4090 ARC 250S DC Output: 30-250A / 60% Duty cycle Input 220V/58.4A EWM0128-I ARC 250S DC Output: 30-250A / 60% Duty cycle Input 380V, 3 Phase / 14.4A EWM0128-IL MMA 160B 220V 160 Amps IGBT Technology 60% Duty cycle DIY to Light engineering MCOW4092 Grease Gun 110-380V TOOT2582 Multimeter Digital SPARK 160 DC Inverter Welder Output: 30-400A / 60% Duty cycle Input 380V, 3 Phase / 47.9A EWM0010-I Tester Continuity AC/DC Tester Voltage 6-24v AC/DC Output: 180 A / 60% Duty cycle Can weld up to 4.0mm electrodes Input 220V 29.5 A DIY MCOW4226 MMA 200S 305x4.7 TOOC129W 395x4.7 TOOC130W Tow Rope Nylon Heavy Duty 770mm TOOS1848 2 Piece Tie Down Strap & Buckel Displacement: 35L/min Inflation of tyre: 155 x SR13:1min TOOC311 104x2.5 TOOC122W 150x3.5 TOOC123W 198x4.7 TOOC125W 180mm TOOF399 Strap Elastic 2 Piece 305x4.7 TOOC129 395x4.7 TOOC130 Cable Ties Black 100’s Plastic Funnel Flexible 4 Piece Plastic Funnel Set DIGITEC 200A Output: 20-160A / 60% Duty cycle Input 220V - 26.7A Industrial with weld safe MCOW4098 1kg TOOM1261 5kg TOOM1262 MMA Hobit 1500 220V 140 Amps, IGBT SMD technology 60% Duty Cycle DIY use MCOW4091 MMA Prodigi 2000 Input 220V Can weld up to 4.0mm electrodes, Output 190 A / 60% Duty cycle Touch panel amp. control, DIY use Compact & portable MCOW4095 DC TIG Welding can be done using the scratch start method. An Argon Flowmeter, SR17V TIG Torch and ARGON Gas is required. ALUMINIUM CAN NOT BE WELDED. Please note: This only applies to Light Engineering Inverters. Argon Flowmeter EWREG0013 WELDING Great Brands • Great Value 15 12 Month Warranty welding welding MIG WELDERS & ACCESSORIES TIG WELDERS & ACCESSORIES 12 Month Warranty MB15 MB 15 X 4mt Binzel Style MIG Torch MIG 175 TIG 200A DC HF TIG 200 AC/DC HF Output: 10-200A / 60% Duty cycle Input 220V / 28A MCOW4080 Output: 10-200A / 60% Duty cycle Input 220V - 28A EWM0129-I TIG250AC/DC Output: 10-250A / 60% Duty cycle Input 220V - 25A EWM0070-I TIG315AC/DC Output: 10-175A / 30% Duty cycle Input 220V - 20A EWM0135-I Output: 10-315A / 60% Duty cycle Input 380V, 3 Phase - 14.7A EWM0069-I TIG ACCESSORIES TIG Torch SR 17V x 4 m (AIRCOOLED) 150 A Valve operated / 60% Duty cycle For use with DC inverter welders Scratch start, Twin hose O ring set EWTT00200 MIG Output: 50-250A MMA TIG Output:15250A @ 60% duty cycle Input 220V - 51.6 Amps MIG Wire sizes: 0.8 – 1.0mm Welds up to 10mm Electrodes: 2.0 – 5.0mm EWM0137-I Conical Shroud (2) EWPACC002 TIG Collets 1.6mm (5) EWPACTT010 2.4mm (5) EWPACTT011 TIG Tungstens Thoriated (Red Tip) 1.6mm (3) EWPACTT039 2.4mm (3) EWPACTT040 TIG Collet Bodies 1.6mm (5) EWPACTT015 2.4mm (5) EWPACTT016 TIG Tungstens Zirconiated (White Tip) 1.6mm (3) EWPACTT042 2.4mm (3) EWPACTT043 MB 25 X 4 M Torch TIG Ceramics 10N49 No. 5 (3) EWPACTT020 10N48 No. 6 (3) EWPACTT022 Euro style 230 Amp DC MIG torch 60% Duty cycle, Can be used on other makes of MIG welders EWB00304 Starter Pack EWPACB002 Tip Adaptor (2) EWPACT002 1.6mm 2.4mm 16 EWPACTT002 EWPACTT003 EWPACC001H Tip Adaptor (2) EWPACT001H MIG Spool Gun Conical Shroud (2) EWPACC001H MIG SB 8 Spool Gun MIG SB8 Starter Pack EWPACB008 Contact Tip M6 for spool gun 0.9mm EWSB-03-01 Aluminium MIG Wire For Spool Gun 4043 0.9mm 500g EWMG00020 5356 0.9mm 500g EWMG00021 M8 Contact Tips TIG Torch Back Caps Combo EWPACTT031 MIG325C MIG365S Output: 30-320A /60% Duty cycle Input 380V / 20A EWM0051-I TIG Starter Pack Aluminium 1.6mm 2.4mm EWPACTT004 EWPACTT005 WELDING Great Brands • Great Value Conical Shroud (5) MIG Contact Tips Output: 30360A / 60% Duty cycle Input 380V / 23A EWM0044-IL MB36 TIG Starter Pack Stainless Steel EWPACC001 130 Amp, 30% Duty cycle EWB00040 MB25 TIG TORCH CONSUMABLES MB15 Starter Pack EWPACB001 MIG 250 M Output: 10250A / 60% Duty cycle Input 220V 51.6A EWM0126-I 200 A Valve operated / 60% Duty cycle For use with DC inverter welders Scratch start EWTT00205 Output: 24-200A / 60% Duty cycle Input 220V 37.4A EWM0136-I Output: 200A / 35% Duty cycle Input 220V - 37.0A, Welds up to 8mm Steel MIG wire sizes: 0.8mm - 1.0mm MMA electrode sizes: 2.0mm - 3.2mm Spool gun can be used for Aluminium welding, EWM0136M MIG250SA TIG Torch SR 26V x 4 m (AIRCOOLED) MIG 200W MIG 200M Multi-Process Welding Machine Euro style 150 Amp DC MIG torch 60% Duty cycle, Can be used on other makes of MIG welders EWB00302 Conical Shroud (2) MB 36 Conical Shrouds (2) EWPACC003 MB 36 Gas Diffusers (2) EWPACG001 MB 36 Tip Adaptors M6 (2) EWPACT006 M8 0.8mm (5) M8 0.9mm (5) M8 1.0mm (5) M8 1.2mm (5) EWPACCT0010 EWPACCT0011 EWPACCT0012 EWPACCT0013 M6 Contact Tips M6 0.8mm (5) M6 0.9mm (5) M6 1.0mm (5) M6 1.2mm (5) EWPACCT001H EWPACCT002 EWPACCT003H EWPACCT004 Metal Inert Gas (MIG) welding, is an automatic or semi-automatic process in which a wire connected to a source of direct current acts as an electrode to join two pieces of metal as it is continuously passed through a welding gun. WELDING Great Brands • Great Value 17 MIG ACCESSORIES 12 Month Warranty 12 Month Warranty Liner (Blue) 0.6 – 0.9mm X 4mt EWB00355 Liner (Red) Mild Steel MIG Wire ER70S-6 1.0 – 1.2mm X 4mt EWB00356 Mild Steel Flux Cored MIG Wire 0.8mm 5kg EWMG00006 0.9mm 5kg EWMG00002A 1.0mm 5kg EWMG00003B 0.9mm 5kg EWSW00006 The primary advantage of MIG welding is that it allows metal to be welded much more quickly than traditional “stick welding” techniques. This makes it ideal for fabrication work. PLASMA WELDERS & ACCESSORIES Blue Case Combination Kit Argon Flowmeter Single Stage Regulator Max flow rate 25 lpm Suitable for argon and mixed argon gas For use on MIG and TIG welders EWREG0013 Acetylene EWREG0003 Oxygen EWREG0004 Cutting Attachment (Saffire) Cutting capacity – 3mm to 200mm Uses ANM/ ANME/ PNM/ PNME nozzles Must be used with EWCUT0003 EWCUT0002 Torches & Regulator PT 31 Torch x 5M for Cut 40 H MCOW4082 60% Duty cycle @ 40 Amp Touch start /drag cutting EWP0200 CUT40K With built in compressor Output: 40A /60% Duty cycle Input 220V - 32A Cuts up to 10mm Mild Steel MCOW4082B CUT 60H Output: 40-230A / 60% Duty cycle Input 220V - 30A MCOW4082 Output: 60-295A / 60% Duty cycle Input 380V - 12A EWM0131-I Complete 1 Piece Cutting Torch (Saffire) Cutting capacity – 3mm to 300mm Uses ANM / ANME / PNM / PNME nozzles EWREG0006 For Cut 60 H EWM0131-I 60% Duty cycle @ 60 Amp H.F start EWP0210 CUT 40, 60, 100, 120, 160 EWPACB00073 EWPACP001 PT 31 Starter Pack Long (CUT 40 H) EWPACP001L PT 31 SHIELD CUP (CUT 40 H) (5) EWPACP0010 PT 31 ELECTRODE LONG (CUT 40 H) (10) EWPACP0020L EWPACP002 P 60 Shield Cup (CUT 60 H) EWPACP0011 PT 31 DIFFUSER (CUT 40 H) (5) EWPACP0031H PT 31 TIP SHORT (CUT 40 H) (5) EWPACP0040H Pt 31 Electrode Long (CUT 40 H) (5) EWPACP0020LH 18 Pt 31 Electrode Short (CUT 40 H) (5) Pt 31 Tip Long (CUT 40 H) (5) P 60 Electrode (CUT 60 H) (5) P 60 Tip 1.2Mm (CUT 60 H) (5) EWPACP0020H EWPACP0021 WELDING Great Brands • Great Value Assortment of pin files for cleaning nozzles EWCP0100 MIXER (SAFFIRE) Triple Flint Lighters EWCP0101 Triple Flint Renewals EWCP0102 ANM Cutting Nozzle Pre-packs Flashback Arrestor Pre-packs 0.8 mm (1) EWPACGC003H 1.2 mm (1) EWPACGC004 1.6 mm (1) EWPACGC005 Swagged Nozzle Pre-packs 3 (1) 5 (1) 7 (1) Torch mounted Qty 1 oxy & 1 ace EWPACGC001 Regulator mounted QTY 1 oxy & 1 aceT EWPACGC002 PNM Cutting Nozzle Pre-packs EWPACGC040 EWPACGC041 EWPACGC042 1.2 mm (1) EWPACGC011 1.6 mm (1) EWPACGC012 1.9 mm (1) EWPACGC013 Nut R/H & L/H + Tailpiece Qty 1 x R/H, 1 x L/H, W2 x Tailpieces EWPACGC035 Face Shields & Goggles Plasma Accessories PT60 P 60 Starter Pack (CUT 60 H) Handle/ Shank (Saffire) Welding capacity -up to 9mm Must be used with EWCUT0003 Uses Swaged nozzles 3, 5, 7 EWREG0015 P 60 Torch x 4M PCB Plasma Air Regulator Nozzle Cleaner Weld up to 9mm and Cut up to 200mm Can be used with EWCUT0002 & EWREG0015 EWCUT0003 Plasma Accessories PT31 PT 31 Starter Pack Short (CUT 40 H) Includes: Single stage oxygen regulator, Swaged nozzles 3, 5, 7, Single stage acetylene regulator, Flash back arrestors, Regulator mount, Handle / Shank, Nozzle cleaner, Mixer, Triple flint Lighter, ANM 1.2mm cutting nozzle, Goggles, Twin hose, O ring set Heavy duty outfit for cutting, Heating, Gouging, Welding, Soldering Brazing and Hardfacing.Welds up to 9 mm and Cuts up to 200 mm EWCUT0001 Single Stage Regulator 12 Month Warranty CUT 40H welding welding GAS ACCESSORIES, FACE SHIELDS & GOGGLES EWPACP0040LH EWPACP0041 Clear Mono Goggles Flip Front Welding Face Shield TOOG727A Lens size: 108 x 51mm TOOW4242 Flip Front Goggles Ideal for Gas welding TOOW4243 FRAGRAM Auto Darkening Welding Face Shield Auto Darkening Goggles Light states: DIN 4 Dark states: DIN 9–13 TOOW4244 Non adjustable TOOW4263 In Lense 007 101 x 49 mm EWLENS016 In Lense 007 110 x 90 mm EWLENS017 Auto Darkening Welding Face Shield (Non adjustable) Fixed shade of DIN 10/11 & clear state shade DIN 4 EWHEL0005 Auto Darkening Welding Face Shield (Adjustable) Variable shade of DIN 9 – 13 & clear state shade DIN 4, Grinding function EWHEL0006 Clear Glass Lense 108 X 51 mm TOOW4242H Auto Darkening Welding Face Shield (Fully adjustable) Variable shade of DIN 9 – 13 & clear state shade DIN 4, Grinding function EWHEL0007 Shaded Glass Lense 108 X 51 mm TOOW4242G WELDING Great Brands • Great Value 19 COMPRESSORS 12 Month Warranty Wrist Chrome Leather Gloves 2.5” Wrist Chrome Leather Gloves 2.5” Wrist Candy Stripe Workers Gloves Green lined TOOG725D TOOG725C 4 Row Wire Brush 5 Row Wire Brush (Mild steel) TOOB37A Heavy duty TOOG733 TOOB40 TOOB39 LUBRICATED DIRECT DRIVE COMPRESSORS TOOG725B Plastic Sword Brush With Scraper Coarse Block Brush (Mild steel) TOOB38 Elbow Chrome Leather Gloves 8” Chipping Hammer Spring steel handle TOOH837 12 Month Warranty KWIKWELD Transformer Oil 1L For oil cooled welders TOOO1284 Jack Plugs 10-25 mm EWPACA001 35-50 mm EWPACA002 Earth Clamp Earth Clamp 200 Amp crocodile style TOOW4238 Machine Socket 10-25 mm EWPACA003 35-50 mm EWPACA004 Cable Lugs Electrode Holder Kd 400 Amp crocodile style TOOW4241 16-10mm EWPPLUG0001 25-10mm EWPPLUG0002 35-10mm EWPPLUG0015 Welding Clamp Magnet Heavy duty TOOW4233 Medium duty TOOW4234 Light duty TOOW4235 300 Amp TOOW4239 2.0 mm (12) 2.5 mm (10) 3.2 mm (8) EWPACELE001 EWPACELE002 EWPACELE003 E 7018-1 Low Hydrogen Electrode Pre-packs 2.5 mm (8) EWPACELE010 E 6013 Mild Steel Electrodes 2.0 mm (4kg) 2.5 mm (5kg) 3.2 mm (5kg) 2.0 mm (1kg) 2.5 mm (1kg) 3.2 mm (1kg) EW00700 EW00701 EW00702 EW00716 EW00717 EW00718 E 312L-16 Stainless Steel Electrode Pre-packs 2.5 mm (8) 3.2 mm (6) EWPACELE035 EWPACELE036 2.0 (10) 2.5 (8) EWPACELE040 EWPACELE041 E 316L-16 Stainless Steel Electrode Pre-packs Cast Iron 55% Electrode Pre-packs 2.5 (6) 3.2 (6) 20 EWPACELE060 EWPACELE061 CCR Brazing Rod Pre-packs 3.0 mm (12) TOOW4292 BBR Brazing Rod Pre-packs 2.0 mm (10) TOOW4293 3.0 mm (6) TOOW4294 3.0 mm (5) Flux coated TOOW4295 500 Amp TOOW4240 Earth & Electrode Welding Cable Set Jack plug fitting 10-25 (blue), 1 x 300 A Electrode holder, 1 x 300 A Earth clamp, 2 x Jack plug 10-25 dinse type connectors 2 x 1.5m, 25mm, 2 Blue welding cable EWCAB1070 Aluminium Gas Brazing Rod Pre-packs 1.6 mm (20) TOOW4296 3.2 mm (14) TOOW4297 6 Piece Welding Kit Semi industrial TOOW4237A 24L 1.1kw D.I.Y, Motor Capacity: 1.1kW, 2850RPM, 230V/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 65L/min Piston displacement 138L/min, Weight: 21kg MCFRC100 Copper Tec Brazing Rod Pre-packs 2.0 mm (8) TOOW4308 3.0 mm (4) TOOW4309 50L 1.5kw D.I.Y, Motor Capacity: 1.5kW, 2850RPM, 230V/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 105L/min Piston displacement 206L/min, Weight: 34kg MCFRC102A 100L 1.5kw D.I.Y, Motor Capacity: 1.5kW, 2850RPM, 230V/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 105L/min Piston displacement 206L/min, Weight: 47kg MCFRC103 Silver Solder Bare Brazing Rod Pre-packs 1.5 mm (2) TOOW4306 Silver Solder Flux Coated Brazing Rod Pre-packs 1.5 mm (2) TOOW4307 WELDING Great Brands • Great Value APPROVED Electrode Holder Kd Electrodes E 6013 Mild Steel Electrode Pre-packs compressors welding GLOVES, ARC ACCESSORIES & ELECTRODES 100L 1.8kw V Head Light Industrial, Motor Capacity: 1.8kW, 2850RPM, 230V~/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 165L/min 284L/min piston displacement, Weight: 64kg Twin cylinder air pump Manual thermal protector on motor MCFRC113 Wide range of accessories available on page 25 24L 1.1kw Compressor with 5 Piece Air Tool Kit D.I.Y, 2850RPM, 230V/50Hz, Weight: 21kg Motor Capacity: 1.1kW Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 65L/min Piston displacement 138L/min Accessories include: 1x paraffin spray gun, 1x gravity feed spray, 1x air duster, 1x tyre inflator, 1x coiled airline hose MCFRC108 50L 1.5kw Compressor with 5 Piece Air Tool Kit D.I.Y, 2850RPM, 230V/50Hz, Weight: 34kg Motor Capacity: 1.5kW Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 105L/min Piston displacement 206L/min MCFRC109 50g Aluminium Flux TOOW4303 COMPRESSORS Great Brands • Great Value 21 12 Month Warranty 12 Month Warranty APPROVED compressors compressors BELT DRIVE COMPRESSORS LUBRICATED DIRECT DRIVE COMPRESSORS APPROVED 6L 350W 12V DC D.I.Y Motor Capacity: 350W/ 0.5HP 1800RPM, DC 12V Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 40L/min Piston displacement 70L/min Weight: 8kg MCFRC106 6L 1.1kw Compact D.I.Y Motor Capacity: 1.1kW 2850RPM, 230V~/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 50L/min Piston displacement 118L/min Weight: 14kg MCFRC107 24L 550w Twin Cylinder Oil Free Silent Direct Drive Compressor D.I.Y Motor Capacity: 550W 1380RPM, 230V~/50Hz Maximum Pressure: 700kPA (7 Bar) Free Air Delivery @ 600kPA (6 Bar): 50L/min Weight: 23kg, Twin Cylinder Maintenance Free Longer Running Life For use in dentistry, food packaging and general applications MCFRC241 22 D.I.Y Motor Capacity: 750W 1380RPM, 230V~/50Hz Maximum Pressure: 700kPA (7 Bar) Free Air Delivery @ 600kPA (6 Bar): 75L/min Weight: 33kg, Twin Cylinder Maintenance Free Longer Running Life For use in dentistry, food packaging and general applications MCFRC242 COMPRESSORS Great Brands • Great Value 270L 7.5kw 100L 1.5kw 270L 5.6kw 500L 7.5kw Light Industrial, Motor Capacity: 1.5KW 2850RPM 230V/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 130L/min 200L/min piston displacement Weight: 75kg MCFRC231 100L 2.2kw APPROVED 50L 750w Twin Cylinder Oil Free Silent Direct Drive Compressor 270L 4.1kw Light Industrial, Motor Capacity: 1.5KW 2850RPM 230V/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 130L/min 200L/min piston displacement Weight: 60kg MCFRC230 OIL FREE SILENT BELT DRIVE COMPRESSORS 12 Month Warranty 50L 1.5kw 50L 2 X 750w 2 X 2 Cylinders Oil Free Silent Direct Drive Compressor D.I.Y Motor Capacity: 2 x 750W 1380RPM, 230V~/50Hz Maximum Pressure: 700kPA (7 Bar) Free Air Delivery @ 600kPA (6 Bar): 150L/min Weight: 45kg, 2 x 2 Cylinders Maintenance Free Longer Running Life For use in dentistry, food packaging and general applications MCFRC243 Light Industrial, Motor Capacity: 2.2KW 2850RPM 230V/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 265L/min 365L/min piston displacement Weight: 75kg MCFRC232 150L 2.2kw Light Industrial, Motor Capacity: 2.2KW 2850RPM 230V/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 265L/min 365L/min piston displacement Weight: 100kg MCFRC233 200L 2.2kw Light Industrial, Motor Capacity: 2.2KW 2850RPM 230V/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 265L/min 365L/min piston displacement Weight: 120kg MCFRC234 Industrial, Motor Capacity: 4.1KW Cast iron motor & pump 2850RPM 380V/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 395L/min Weight: 240kg PE50300 Industrial, Motor Capacity: 5.6KW Cast iron motor & pump 2850RPM 380V/50Hz Maximum Pressure: 1200kPA (12 Bar) Free Air Delivery @ 1100kPA (11 Bar): 400L/min Weight: 240kg PE75300 Light Industrial, Motor Capacity: 7.5KW Cast iron motor & pump 2850RPM 380V/50Hz Maximum Pressure: 1200kPA (12 Bar) Free Air Delivery @ 1100kPA (11 Bar): 550L/min Weight: 259kg PE100300 Light Industrial, Motor Capacity: 7.5KW Cast iron motor & pump 2850RPM 380V/50Hz Maximum Pressure: 1200kPA (12 Bar) Free Air Delivery @ 1100kPA (11 Bar): 550L/min Weight: 400kg PE100500 Do you know about AIA? THE AIA (APPROVED INSPECTION AUTHORITY) The AIA ensures that the compulsory set of compliance standards which govern pressure equipment design and manufacture are adhered to. WHY IS IT IMPORTANT TO YOU? Catastrophic pressure vessel failure is a reality in the consumer compressor market place. Choose correctly and ensure your compressor complies with AIA certification to enjoy peace of mind and years of safe operation. COMPRESSORS Great Brands • Great Value 23 12 Month Warranty AIR TOOLS APPROVED 12 Month Warranty 100L 2.2kw Industrial, Motor Capacity: 2.2kW /3.0HP 2850RPM, 230V/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 250L/min Piston displacement 330L/min Weight: 75kg MCFRC236 air tools compressors OIL FREE BELT DRIVE COMPRESSORS 150L 2.2kw Industrial, Motor Capacity: 2.2kW /3.0HP 2850RPM, 230V/50Hz Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 250L/min Piston displacement 330L/min Weight: 75kg MCFRC240 Air Duster Semi-Industrial Short nozzle Maximum pressure: 9 bar Min compressor required: 1.1KW Pressure required: 3 - 8 bar Suitable for blowing and cleaning away cuttings etc TOOS1751 4 STROKE PETROL BELT DRIVE COMPRESSORS 12 Month Warranty Undercoating Gun Max Pressure: 90PSI/ 628KPA Working pressure: 60PSI/ 419KPA, Air consumption: 11.3CFM/ 321L/min, Feed type: Suction Air intake: Suction, Min recommended compressor: 3HP/ 2.2KW TOOG747 APPROVED 100L 4.8Kw Light Industrial Motor Capacity: 4.8KW (6.5HP) 4 Stroke petrol motor Maximum Pressure: 800kPA (8 Bar) Free Air Delivery @ 700kPA (7 Bar): 200L/min 364L/min piston displacement Weight: 78kg MCFRC210 Blow Gun Semi-Industrial Extended nozzle Air inlet: 6.5mm Suitable for unblocking oilways in engines & machine parts, cleaning electrical circuit boards & computers, general cleaning duties in & around the workshop PAB1208 Semi-Industrial, Cup capacity: 1000cc, Working pressure: 5 bar, Adjustable nozzle for fine or course spray, Suitable compressor: 1.1KW/ 24L & above Use to clean: Motor vehicles, boats, engines & outer components, Lubrication of suspension parts & machinery TOOS1746 Great Brands • Great Value D.I.Y Working pressure: 405-709kPA (4-7 bar) 6mm Air intake Need to connect to a 1/2” or 12.5mm hose pipe PAB1211 Air Brush Set D.I.Y, Hand piece protective cap 22cc cup, 5cc metal cap, 60cc mixing jar with lid, Spray jar, Spanner PVC Airline hose with adaptors PAB1209 Inflating Gun D.I.Y Suitable for: Inflating car tyres, bicycle tyres, air beds & inflatables, footballs etc PAB1204 100L 8.2Kw Light Industrial Heavy duty base tank Motor Capacity: 8.2KW (11HP) 4 Stroke petrol motor Maximum Pressure: 1200kPA (12 Bar) Free Air Delivery @ 1100kPA (11 Bar): 360L/min 519L/min piston displacement Weight: 130kg MCFRC235 D.I.Y, High pressure spray gun, Paraffin spray gun, Tyre Inflator, Air duster, Coiled hose TOOS1786 24 Washing Gun D.I.Y Working pressure 6 bar Suitable for: Removing old paint, rust spots etc, renovation of plants & machinery Suction feed for blasting material Min air compressor required: 3HP/ 2.2KW PAB1210 Paraffin Spray Gun 5 Piece High Pressure Spray Gun & Accessory Kit COMPRESSORS Sand Blaster 5 Piece Air Compressor Accessory Kit D.I.Y, Spray Gun, Degreasing Gun, Blow Gun, Tyre inflator, Air hose & connectors PAB1205 Fragram Sandblasting Gun With Hose TOOG749 TRADEAIR AIR TOOLS Great Brands • Great Value 25 GRAVITY FEED/ JUST TOOLS XX PRESSURE SPRAY GUNS AIR POWERTOOLS XXXXXXXX 12 Month Warranty xxxxxxxxxxxxxxx air tools Dual Action Sander 150mm Pad Size D.I.Y 10mm Drill capacity 6.5mm air inlet 1800RPM free speed Working pressure: 608kPA/ 6.5 bar Avg air consumption @ 100% duty cycle: 200L/min Fitted with a 10mm keyless chuck PAB1300 D.I.Y, Pad size: 150mm Free speed: 9000RPM, Air inlet: 6.5mm Avg air consumption at 100% duty cycle: 14CFM/ 397L/min Working pressure: 659kPA/ 6.5 bar Min air compressor required: 3HP/ 2.2KW Suitable for: Finishing body filler, ideal for contoured surface PAB1342 1/2” Impact Wrench & Socket Set Gravity Feed Spray Gun D.I.Y Fluid nozzle: 1.5mm Plastic cup: 500cc Pattern width: 120-220mm Working pressure: 300-400kPA (3-4 bar) Air consumption: 350l/min - 12CFM Suitable compressor: 2HP & above PAB1206 Gravity Feed Spray Gun D.I.Y Fluid nozzle: 1.4mm Cup Capacity: 600ml Max operating pressure: 3.5 - 8 bar Average air consumption: 100 - 200L/min Suitable compressor: 1.5KW or above TOOS1744 Suction Feed Low Pressure Spraygun D.I.Y Feed type: Pressure Standard nozzle: 1.3mm Optional nozzle: 1.2mm Average air consumption: 3CFM / 85L/min Cup Capacity: 0.8L Recommended Air Pressure: 10 -40Psi Canister Capacity: 0.8L Paint Nozzle: 1.3mm TOOS1784 Suction Feed High Pressure Spray Gun Industrial Standard Nozzle: 1.6mm Cup Capacity: 1L Avg Air Consumption: 10CFM / 280L/min Recommended Air Pressure: 355 - 480kPA/ 3.5 - 4.8 bar Canister Capacity: 0.8L Adjustable spray pattern Non-bleeder type, siphon feed External mix nozzle Dual Action trigger Air inlet 1/4” BSP Paint nozzle: 2.0mmØ Professional quality Min recommended compressor: 2HP/ 1.5KW and above TOOS1785 26 Reversible Air Drill Deluxe Mini HVLP Spray Gun D.I.Y Fluid nozzle: 1.4mm 30-80Psi Operating pressure 160-300L/min Air consumption 6.35mm NPS (M) Air connector 100ml Cup size Non bleeder type, gravity feed & external mix spray TOOS1790 D.I.Y 1/2” Impact wrench 10 x 1/2” Drive impact sockets: 9, 10, 11, 13, 14, 17, 19, 22, 24, 27mm 1/2” Drive extension bar, Mini oiler Connecting nipple, Tube oil air tool 16mm bolt capacity 7000RPM free speed Avg air consumption at 100% duty cycle: 23CFM/652L/min Working pressure: 659kPA/ 6.5 bar Min air compressor required: 3HP/ 2.2KW Suitable for: automotive applications, removing vehicle wheel nuts, metal construction applications PAB1310 Gravity Feed Spray Gun Industrial Standard Nozzle: 1.4mm Cup Capacity: 0.6L Average Air Consumption: 8CFM/ 228L/min Recommended Air Pressure: 50 - 70PSI 3 Control adjustment valves: a) Paint flow, b) Fan adjustment c) Air control TOOS1789 Suction Spray Gun Die Grinder 6mm Collet High Pressure Spray Gun Industrial Standard nozzle: 1.8mm Cup Capacity: 1L Average Air Consumption: 7CFM / 200L/min Recommended Air Pressure: 50-70PSI TOOS1769 Mini Gravity Feed Touch-Up Gun Gravity flow cup 125ml Cup capacity Air inlet 1/4 Air pressure 20-40 P.S.I Ave air consumption 1.6-4.0 CFM Adjustable spray pattern Fluid adjustment knob TOOS1742 TRADEAIR AIR TOOLS Great Brands • Great Value Chipping Hammer Set D.I.Y Air hammer, 4 x Chisels, Spring retainer Connecting nipple. Required air pressure: 628kPA/ 6.2 bar Avg air consumption: 5CFM/141L/min Max speed: 3000blow/min Air intake: 1/4” Suggested air compressor: 2HP/ 1.5KW or larger Suitable for: chipping tiles, paving & brickwork etc, sheet metal fabrication PAB1320 100mm Angle Grinder D.I.Y, Working pressure: 6.5 bar/ 659kPA Avg air consumption: 14CFM/ 396L/min Disc size: 100mm x 16mm bore, Free speed: 11000RPM Air inlet: 6.5mm, Suitable compressor: 4HP/ 3KW and above, Suitable for: Car body work & metal fabrication applications PAB1340 12 Month Warranty D.I.Y Fluid nozzle: 1.5mm Aluminium cup: 1000cc Pattern width: 120-220mm Working pressure: 300-400kPA (3-4 bar) Air consumption: 350l/min - 12CFM Air inlet: 6.5mm Suitable compressor: 2HP & above PAB1207 D.I.Y Die grinder, 5x 6mm Moulded stones 2x Hand wrenches Connecting nipple Working pressure: 695kPA/ 6.5 bar Free speed: 22000RPM Air inlet: 6.5mm, Collet: 6mm Avg air consumption at 100% duty cycle: 11CFM/ 311L/min Suitable compressor: 3HP and above Suitable for: grinding & smoothing rough castings; removing rust from metalwork; general workshop use, model making PAB1360 air tools 12 Month Warranty 12.5mm Drive Ratchet Wrench D.I.Y 1/2 Drive ratchet 9, 10, 11, 13, 14, 17, 19mm 7 x 1/2” drive sockets 2 x extensions, Swivel Connecting nipple PAB1315 Nailer/ Staple gun D.I.Y, Working pressure: 608kPA/ 6 bar, 65mm Air intake Avg air consumption: 5CFM/ 142L/min, Minimum compressor required: 2HP/ 1.5KW Uses F series nails: 10 - 32mm Uses ffg staples: 6 - 32mm Suitable for: nailer - fixing mouldings, cladding & picture framing, stapler - use in upholstery PAB1350 F30 Air Nailer Working pressure: 6 bar, Guage: 18, Crown: 9.1mm Shank width: 1.25mm Nail length capacity: 10-30mm PUAT3010CH T50 Air Nailer Working pressure: 6 bar, Guage: 16, Crown: 1.4mm Shank width: 1.6mm Nail length capacity: 20-50mm PUAT3020CH Finishing Nailer D.I.Y Working pressure: 608kPA/ 6 bar Uses T series nails, Nails: 15 - 50mm Suitable for: Fixing mouldings, cladding & picture framing PAB1352 TRADEAIR AIR TOOLS Great Brands • Great Value 27 AIR ACCESSORIES AIR POWER TOOLS air tools 12 Month Warranty 1/4” Bsp Female Air Quick Coupler TOOC340 1/4” Bsp Male Air Connector TOOC341 1/4” Bsp Female Air Connector TOOC342 8mm Air Hose Connector TOOC344 8mm Hose to 1/4” BSP Male Fitting Connector TOOC346 6mm Hose To Split Nut Fitting TOOC349 Inline Lubricator Helps to reduce wear on air tools, Automatically lubricates air line system 6.35mm thread PAB1222 12.5mm Drive Impact Wrench 1/4” Regulator & Water Trap Combo Maximum inlet pressure : (150PSI) Maximum temperature: 60ºC (140F) Maximum pressure: 10 bar TOOR1489 5 Piece 8mm Air Hose Connector Set 8mm Hose to 6.35mm BSP male fitting 6.35mm BSP male connector 6.35mm BSP female air quick coupler 6.35mm BSP female air connector 8mm Air hose connector TOOC348 18 Guage Staples 1000 Piece 6.35mm Pressure Regulator/ Water Filter Designed to reduce moisture content in the air flow and adjust the air pressure 6.5mm female inlet & outlet Complete with pressure guage sockets Manual pressure adjustment PAB1220 TOOO1286 Double layer re-inforced PVC airline hose Resistant to fuels, oils, solvents & chemicals Strong polvin/ nylon contruction 1750kPA Test pressure 6mm x 10m length with fittings Will not kink and reduce air flow N.O.S.A blue, colour coding TOOH910 28 PVC High Pressure Air Hose Abrasion resistant air/ water hose Weather resistant wont kink Ideal for high pressure lines & compressors, 1750kPA Pressure 6mm x 20m TOOH501 8mm x 20m TOOH502 10mm x 20m TOOH503 6mm x 100m TOOh506 8mm x 100m TOOh507 10mm x 100m TOOh508 Rubber High Pressure Air Hose Abrasion resistant air/ water hose Weather resistant wont kink Ideal for high pressure lines & compressors, 1750kPA Pressure 6mm x 20m TOOH509 8mm x 20m TOOH510 6mm x 100m TOOH511 8mm x 100m TOOH512 Professional 16mm Bolt capacity 7000RPM Free speed 27kg/cm 220ft/lbs Max Torque 6.5mm Air inlet, Avg air consumption @ 100% duty cycle: 26CFM Working air pressure: 6.5 bar Single hammer clutch type Min compressor required: 4HP PUAT5040 Industrial, Heavy duty 16mm Bolt capacity 7000RPM Free speed 55kg/cm 400ft/lbs Max Torque 6.5mm Air inlet Avg air consumption @ 100% duty cycle: 23CFM Working air pressure: 6.5 bar Twin hammer clutch type Min compressor required: 5HP PUAT5044 12.5mm Drive Impact Wrench Industrial, Heavy duty 16mm Bolt capacity 7 000RPM Free speed 230kg/cm 350ft/lbs Max Torque 6.5mm Air inlet Avg air consumption @ 100% duty cycle: 27CFM, Working air pressure: 6.5 bar Pin clutch type Min compressor required: 5Hp PUAT5043 17 Piece 12.5mm Drive Impact Wrench Kit Professional 1Pc AT-5040 10 Pc Air Sockets: 10,11,12,13, 15,17,19,21,22,24,mm 1Pc 5” Extension Bar, 1Pc Oil Pot 1Pc Hex Wrench, 1Pc Nipple 1Pc Plastic Case, 1Pc Mini Oiler Packing: 4 Sets/ Ctn/19kgs/1.25’ 16mm Bolt capacity 7000RPM Free speed 30kg/cm 220ft/lbs Max Torque 6.5mm Air inlet, Avg air consumption @ 100% duty cycle: 23CFM Working air pressure: 6.5 bar Single hammer clutch type Min compressor required: 5HP PUAT5004 19mm Drive Impact Wrench Professional 25mm Bolt capacity, 4500RPM Free speed 69kg/cm 500ft/lbs Max Torque 10mm Air inlet, Avg air consumption @ 100% duty cycle: 30CFM Working air pressure: 6.5 bar Single hammer clutch type, Min compressor required: 7.5HP PUAT5060 19mm Drive Impact Wrench Industrial, Heavy duty 19mm Bolt capacity 4200RPM Free speed 100kg/cm 700ft/lbs Max Torque • 6.5mm Air inlet Avg air consumption @ 100% duty cycle: 30CFM Working air pressure: 6.5 bar Pin clutch type Min compressor required: 7.5HP PUAT5061 150 x 25mm Drive Impact Wrench Spray Gun Holder TOOS1791 TRADEAIR AIR TOOLS Great Brands • Great Value 12.5mm Drive Impact Wrench For use on stapler PAB1350 & PAB1352 F10 Air nails PAB1366 F15 Air nails PAB1367 F20 Air nails PAB1368 F25 Air nails-1.22mm PAB1369 F30 Air nails PAB1370 1Lt Air Compressor Oil PVC Airline Hose With Fittings Professional 16mm Bolt capacity 7 000RPM Free speed 32kg/cm 230ft/lbs Max Torque 6.5mm Air inlet Avg air consumption @ 100% duty cycle: 23CFM Working air pressure: 6.5 bar Pin clutch type Min compressor required: 5HP PUAT5041 12.5mm Drive Impact Wrench 18 Guage Air Nails 1000 Piece For use on TRADEair stapler PAB1350 10mm Staples PAB1361 19mm Staples PAB1363 28mm Staples PAB1364 air tools 12 Month Warranty Industrial, Heavy duty, 32mm Bolt capacity, 3000RPM Free speed 152kg/cm 900ft/lbs Max Torque, 12.5mm Air inlet, Avg air consumption @ 100% duty cycle : 53CFM, Working air pressure: 6.5 bar, Twin hammer clutch type Min compressor required: 10HP PUAT5086 PUMA AIR TOOLS Great Brands • Great Value 29 JUST TOOLS XX AIR POWER TOOLS AIR POWER TOOLS XXXXXXXX 12 Month Warranty xxxxxxxxxxxxxxx air tools air tools 12 Month Warranty 10mm Drive Air Ratchet Wrench Light, 10mm Bolt capacity 160RPM Free speed 6.9kg/cm 50ft/lbs Max Torque 6.5mm Air inlet Avg air consumption @ 100% duty cycle: 18CFM Working air pressure: 6.5 bar Twin hammer clutch type Min compressor required: 2.5HP PUAT5052 13mm Drive Air Ratchet Wrench Professional, 13mm Bolt capacity 160RPM Free speed 6.9kg/cm 50ft/lbs Max Torque 6.5mm Air inlet Avg air consumption @ 100% duty cycle: 18CFM Working air pressure: 6.5 bar Single hammer clutch type Min compressor required: 2.5HP PUAT5053 10mm Chuck Air Drill Light, 10mm Drilling capacity 1800RPM Free speed 6.5mm Air inlet Avg air consumption @ 100% duty cycle: 7CFM Working air pressure: 6.5 bar Reversible pistol action Min compressor required: 2.5HP PUAT4031 13mm Chuck Air Drill Professional 13mm Drilling capacity 400RPM Free speed 6.5mm Air inlet Ave air consumption @ 100% duty cycle: 10CFM Working air pressure: 6.5 bar, Reversible pistol grip Min compressor required: 3HP PUAT4041 150mm Dual Action Air Sander 5” Air Orbital Sander Professional, Spindle thread: 150mm Free speed: 9000RPM Air inlet: 6.5mm Air hose: 3/8”, Average air consumption at 100% duty cycle: 14CFM, Work air pressure: 6.5 bar Min compressor required: 4HP PUAT7015P Professional, Sanding paper: 93 x 228mm Free speed: 8000RPM Air inlet: 6.5mm, Air hose: 3/8” Average air consumption at 100% duty cycle: 14 CFM Work air pressure: 6.5 bar Min compressor required: 4HP PUAT7018 Air Stapler Professional, Crown: 11.2mm Shank width: 1.20mm, Gauge 20, Uses J series staples Staple length: 10 - 22mm Average air consumption @ 100% duty: 3CFM Working air pressure: 6.5 bar Min compressor required: 2HP PUAT3001 10mm Chuck Angle Air Drill Professional 10mm Drilling capacity, 1900RPM Free speed 6.5mm Air inlet, Avg air consumption @ 100% duty cycle: 7CFM Working air pressure: 6.5 bar, Non reversible angle action Min compressor required: 2.5HP PUAT4035 125mm Air Angle Grinder Professional Free speed: 11 000 RPM Air inlet: 6.5mm Average air consumption at 100% duty cycle: 14CFM Working air pressure: 6.5 bar Min compressor required: 4HP PUAT7037 1800RPM Air Screwdriver Professional 6.35mm Hex shank size 6mm Capacity bolt size 1800RPM Free speed 52 - 130kg.cm Max Torque 1/4” Air inlet, Avg air consumption @ 100% duty cycle: 7CFM Pistol adjustable clutch 6.5 bar Working air pressure Min compressor required: 2.5HP PUAT4080 800RPM Air Screwdriver 4.8mm Air Hydraulic Riveter Industrial 6.35mm Hex shank size, 6mm Capacity bolt size 800RPM Free speed 52 - 167kg.cm Max Torque 1/4” Air inlet, Ave air consumption @ 100% duty cycle: 7CFM, Pistol adjustable clutch 6.5 bar Working air pressure Min compressor required: 2.5HP PUAT4080A Industrial Traction power: 720kg Stroke length:14mm Overall length: 273mm Air inlet: 1/4” Average air consumption at 100% duty cycle: 4 CFM Nett weight: 1.5kg Work air pressure: 6.5 bar Min compressor required: 2HP PUAT6015 100mm Air Blow Gun 1/4” Extended Air Die Grinder Light Free speed: 25000RPM Air inlet: 6.5mm Average air consumption @ 100% duty cycle: 5 CFM Work air pressure: 6.5 bar Min compressor required: 2.5HP PUAT7033L 30 1/4” Air Die Grinder Professional Free speed: 22000RPM Overall length: 160mm Air inlet: 6.5mm Capacity bolt size: 6mm Average air consumption at 100% duty cycle: 11 CFM Work air pressure: 6.5 bar Min compressor required: 3HP PUAT7033 1/4” Air Die Grinder Kit Light 1x AT7033, 1x Blow case, 2x Wrenches, 10 x Grinding stones Free speed: 22000RPM, Overall length: 160mm Air inlet: 6.5mm, Capacity bolt size: 6mm Average air consumption at 100% duty cycle: 11 CFM Work air pressure: 6.5 bar, Min compressor required: 3HP PUAT7033K PUMA AIR TOOLS Great Brands • Great Value Semi-Industrial, Body material: Plastic P.O.M Nozzle material: Steel, Nozzle length: 100mm Working pressure: 115PSI/ 8kg/cm2 Max pressure: 156PSI/ 11kg/cm2, Air inlet: 1/4” PT (NPT) PUAA5006 190mm Air Hammer With 4 Chisels (Round) Light, 1 Pc Air hammer, 1 Pc Air nailer scaler attachment (AT-2071), 1 Pc Inlet adaptor, 1 Pc Mini oiler, 1 Pc Retainer, 5 Pc 7” Chrome molybdenum chisels Chisel shank: 10mm, Piston bore: 19.05mm Piston stroke: 66mm, Blow per minute: 3 000RPM Air inlet: 6.5mm, Air hose: 3/8” Avg air consumption at 100% duty cycle: 9CFM Working air pressure: 6.5 bar Min compressor required: 3HP PUAT2020/R F30 Air Nailer Professional, Crown: 9.1mm, Shank width: 1.25mm Gauge: 18 Uses F series staples Average air consumption @ 100% duty: 5CFM Working air pressure: 6.5 bar, Min compressor required: 2HP PUAT3010 Air Hydraulic Riveter Kit SPEC AS PER PUAT6015 CONTENTS: AT6015 Air riveter, Air hose joints Rivets,Oiler, Blowmould case Nose pieces: 3/32”, 1/18”, 5/32” 3/16” Jaw case, Jaw, Jaw case joint Jaw pusher, Return springs Valve pusher spring, Jaw pusher spring Frame O-rings, Frame back-up rings Oil piston O-rings & back-ups Hanging clip O-ring Frame joint O-ring & back ups Frame brass joint, Valve pusher O-rings Valve, Valve cap O-ring Air piston ring, Lock nut O-ring Air cylinder O-ring, Spanner gauge, Spanner PUAT6015K 300mm Air Blow Gun Semi-Industrial, Body material: Plastic P.O.M Nozzle material: Steel, Nozzle length: 100mm Working pressure: 115PSI/ 8kg/cm2 Max pressure: 156PSI/ 11kg/cm2, Air inlet: 1/4” PT (NPT) PUAA5006-3 Air Grease Gun Professional, Capacity (bulk): 400cc, Capacity (cartridge): 14oz, Pressure tested: 1200 - 6000PSI at 30 - 120PSI, Loading ways: C105 - Stand 14 or 14.5 / C107: Grease cartridge / C108: Loading with dispenser / C109: Loading with bulk grease, Min compressor required: 2HP PUAT6036 PUMA AIR TOOLS Great Brands • Great Value 31 AIR ACCESSORIES GENERATORS 12 Month Warranty air tools 650W Portable Generator 1.0kW Petrol Generator 2 Stroke, 650W Single cyclinder Side mounted valve 4.5L Fuel tank (±5-8hrs) MCOG703 Economic Air Brush Kit Light, Nozzle: 0.3mm Working air pressure: 15-45PSI Air consumption: 0.4 - 0.8CFM Cup capacity: 20cc, Screw-on type cup Double action trigger - air/paint control Adaptor permits use with propel can or air compressor Excellent for fine art work and hobby crafts such as:photo-retouching, fine drawings, illustrations, pricing plastic items by application of colour inks, watercolours, lacquers, design colours, acrylic colours etc PUAB1006 Oil & Water Separator Semi-Industrial A good spray job requires clean air, free from oil & water. This simple device is easily attached between your spray gun and air line and removes water and oil with very little pressure reduction PUAA2002 1Lt Air Tool Oil Industrial For in-line lubrication of air tools With rust inhibitors to prevent internal corrosion of components TOOO1285 High Pressure Spray Gun Semi-Industrial Standard nozzle: 1.6mm Optional nozzle: 1.0mm, 1.5mm, 1.8mm & 2.0mm Feed type: Suction Capacity of cup: 1.0 litre Air inlet: 1/4”, Air hose: 3/8” Average air consumption: 10CFM/280L/min Nett weight: 1.1kg Recommended air pressure: 30-50Psi PUAS1040 Air Duster Semi-Industrial, Body material: Aluminium Nozzle material: Aluminium Working pressure: 115PSI/ 8kg/cm2 Max pressure: 156PSI/ 11kg/cm2 Air inlet: 1/4” PT (NPT) PUAA3010 Professional Body material: Aluminium Nozzle material: Aluminium Working pressure: 115PSI/ 8kg/cm2 Max pressure: 156PSI/ 11kg/cm2 Air inlet: 1/4” PT (NPT) PUAA3020 5.5kW Petrol Generator Maximum output: 5500W 4 Stroke Single cylinder engine Forced Air Cooled MCOG706EW Maximum output: 6500W Rated voltage: AC 220V Rated frequency: 50hz 4 Stroke, OHV Air cooled, single cylinder engine Brushless alternator with AVR & copper windings MCOG707EW 2.3kW Petrol Generator 1/4” Mini In-Line Oiler Semi-Industrial 6.5mm female outlet + male inlet Do not use on spray guns PUAA3040 Universal Spring Retainer Industrial For use with PUMA 190mm Air hammer PUAT2020/R PUAT2001 Maximum output: 2300W Rated voltage: AC 220V Rated frequency: 50hz 4 Stroke OHV air cooled, single cylinder engine Brush alternator with AVR Max output (HP/RPM): 7.0HP/3600RPM MCOG704 2.5kW Petrol Generator Maximum output: 2500W 4 Stroke Single cylinder engine MCOG701 Industrial, 2500Pc per box Guage: 16, Thickness: 1.6mm 20mm PUT20 25mm PUT25 32mm PUT32 38mm PUT38 45mm PUT45 50mm PUT50 PUMA AIR TOOLS 5.5kW Contractors Petrol Generator 230V - 50Hz Electric & Pull start 4 Stroke, Single cylinder 13.0HP Petrol motor Forced air cooled 3000 No-load speed 5.5KW Peak power 5.0KW Rated power Single phase 5.5L Fuel tank MCOG697 1.2kW Pure SINE Wave Petrol Inverter Generator Puma Fasteners- Air Nails Industrial, 5000Pc per box Guage: 18, Thickness: 1.25mm PU1022J Great Brands • Great Value 12 Month Warranty Air Blow Gun 6.5kW Petrol Generator Puma Fasteners- Air Nails 32 4 stroke OHV Recoil manual start MCOG702 generators 12 Month Warranty 4 stroke OHV, 3.6L tank 1200W max, 1000W continuous 220V 50~16A, 4.3hrs continuous TOOI511 2.0kW Pure SINE Wave Petrol Inverter Generator 4 stroke OHV, 5.7L tank 2000W max 1800W continuous 220V 50~16A 4.6hrs continuous TOOI512 3.5kW Pure SINE Wave Petrol Inverter Generator 4 stroke OHV, 5.7L tank 3500W max 3000W continuous, 220V 50~16A 3.1hrs continuous TOOI513 2.8kW Petrol Generator (Generation 2) Maximum output: 2800W, Recoil and Electric Start 14L Fuel Tank, Portable with wheels and handles MCOG725 4.5kW Petrol Generator (Generation 2) Maximum output: 4500W, Recoil and Electric Start, 28L Fuel Tank, Portable with wheels and handles MCOG727 10.0 kW Petrol Generator Set Maximum output: 11 000W Recoil and Electric Start Large Fuel Tank, Portable with wheels and handles MCOG728 GENERATORS Great Brands • Great Value 33 GARARGE & AUTOMOTIVE TRADEquip TRADEquip 12 Month Warranty 12 Month Warranty garage equipment 30L Sand Blasting Cabinet Sand capacity: 6 Kg Ceramic nozzle: 3.5 mm Air consumption: 198 L/m Min. compressor req.: 3 HP B/D Light & gloves included MCOS1000 Two Ton Engine Crane  oldable, Height: 1450 mm F Length: 1550 mm MCOC255 Two Ton Engine Crane Fixed Height: 1450 mm Length: 1550 mm MCOC257 0.5 T Engine Stand Operating height: 800mm Capacity: 450 Kg TOOT2800 Wheel Balancer Auto OPT mode for optimization SP and hidden weight mode Pedal-operated main shaft lock TOOJ985 Wheel Balancer Manual Motor free Manual input of all wheel data Pedal-operated main shaft lock TOOJ984 106 L Sand blasting Pot With Vacuum 90 L Sand Blasting Pot Tank: 305mmØ x 508mmH Air consumption: 708 L/m Includes nozzle, pressure gauge, shut off valve, ceramic nozzle, hose, filling funnel, water trap and hood MCOS1003 Pipe Bender with External Pump Shoe sizes: 1/2, 3/4, 1, 11/4, 1 1/2, 2 MCOP1451 Ten Ton Porta Power Body Repair Kit 122 mm Stroke of ram Variety of spreader accessories MCOJ973 34 Tank: 381mmØ x 1040mm H Air consumption: 708 L/m Includes built in vacuum which eliminates mask usage and recycles abrasives for reuse. Seperates abrasives from debris MCOS1004 90L Sand Blasting Cabinet Dimensions: 66 x 53 x 49 cm Work space: 56 x 46 x 28 cm Air consumption: 145 L/m Min. compressor req.: 3 HP B/D Light, gloves & gun included MCOS1001 Spring Compressor Max load: 1,1 Ton Compressed spring: 400 mm Compressed length: 210 - 570 mm TOOC259 Hydraulic Shop Presses 10 Ton Common MCOP1444 10 Ton Professional MCOP1445 20 Ton Professional MCOP1446 30 Ton Professional MCOP1447 50 Ton Professional MCOP1448 GARAGE & AUTOMOTIVE Great Brands • Great Value Max Rim 660 mm TOOJ983 Max Rim 457 mm TOOJ982 Length : 1500mm TOOT2812 16 Ton Shoe sizes: 1/2, 3/4, 1, 11/4, 1 1/2, 2, 2 1/2, 3” MCOP1437 Tyre Changer Tyre Changer Engine Support Hydraulic Pipe Bender garage equipment GARAGE & AUTOMOTIVE Hand Held Sand Blasting Gun 0.9L Tank, With 4 functions Lightweight plastic body MCOS1005 Hand Held Sand Blasting Gun Single action for easy operation 4 Nozzles: 2, 2.5, 3, 3.5mm Air inlet key wrench MCOS1006 Sand Blasting Hood Durable fabric Large acrylic viewing window Reinforced ventilation panels MCOS1007 220 L Sand Blasting Cabinet Dimensions: 138 x 87 x 63 cm Work space: 145 x 87 x 63 cm Air consumption: 708 L/m Min. compressor req.: 10 HP B/D Includes light, gloves & gun MCOS1002 GARAGE & AUTOMOTIVE Great Brands • Great Value 35 GARARGE & AUTOMOTIVE 12 Month Warranty 76 L Part Washer 151 L Part Washer 45 L Solvent capacity Includes pump & parts basket MCOS1008 90 L Solvent capacity Includes pump & parts basket MCOS1009 garage equipment 80 L Oil Drainer Tank capacity: 151 L Tank size: 711 x 482 x 939mm Includes pump & parts basket MCOS1010 0.5 Ton Telescopic Gearbox Jack Height range: 124 - 176mm Steel drum MCOS1011 Height range: 103 - 170mm For use with a drum MCOS1012 Plastic Creeper Steel Creeper Nett weight: 4 Kg Length: 900 mm TOOC121 Nett weight: 5.5 Kg Length: 900 mm TOOC115 1200mm Off Road Jack 3.5 Ton Floor Jack Aluminium 1.5 Ton Floor Jack 154 - 1070mm height, 3 ton maximum load, 14kg weight TOOT2808 Quick Lift Heavy Duty 105 - 485 mm working range 52.5 kg gross weight Low wheel base Rubber saddle pad and handle bumper to protect the vehicle body TOOJ973 Working range: 90 - 447mm 19 kg gross weight Safety bypass system prevents damage Universal point release mechanism TOOJ974 2 Ton 4 Wheel Quick Lift, 85 460mm working range 25kg weight Swivel rear castors for easy maneuverability TOOJ975 1500mm Off Road Jack 154mm 1350mm height, 3 ton maximum load, 15kg weight TOOT2809 3 Ton Ratcheting Axle Stands Bottle Jacks 36 Size Lift height Min. height without screw Lift height with screw 50 Ton 30 Ton 20 Ton 10 Ton 5 Ton 2 Ton 285mm 255mm 235mm 200mm 200mm 158mm n/a 210mm 205mm 185mm 185mm 150mm 180mm 150mm 145mm 125mm 125mm 90mm 285 - 425mm, Portable Rigid Construction, Ductile Iron Rack TOOT2805 0.5 Ton Low Gearbox Jack Code TOOJ957 TOOJ956 TOOJ955 TOOJ1004 TOOJ0504 TOOJ951 Hydraulic & telescopic Min Height: 200mm Max Height: 670mm TOOJ977 1 Ton Min Height: 190mm Max Height: 780mm TOOJ979 6 Ton Ratcheting Axle Stands 110 W 2 Speed Percussion Drill Compact ergonomic design offers excellent handling Variable speed control with forward and reverse mechanism Hammer action stop for rotary drilling, 13 mm metal chuck Supplied in kitbox AEGSBE630R 24 mm drilling capacity in concrete Rotary stop for light chiselling applications FIXTEC quick change chuck Safety clutch for user protection Variable speed electronics for control Hammer action stop for drilling in wood or metal Forward and reverse mechanism Soft-grip handle for comfort AEGKH24E Anti vibration system for better comfort of use, Large metal gear case for maximum durability, 2-speed gearbox 13 mm metal chuck Ergonomic soft-grip design for comfort AEGSB2E1100RV 800 W SDS-Plus Combi Hammer 26 mm drilling capacity in concrete Rotary stop for light chiselling applications Safety clutch for user protection Variable speed electronics for control Hammer action stop for drilling in wood or metal Forward and reverse mechanism Soft-grip handle for comfort AEGKH26E 12V Compact Drill 12V Cordless Drill Compact and productive. For heavy-duty The maximum torque of 30 Nm 2 speeds: 0-350 / 0-1350 rev / min 24 torque adjustment Fixtec nut and 10 mm cartridge odnomuftovy The ergonomic handle design with an elastic lining to increase user comfort AEGBS12G2NC-143C 1200 W SDS-Max Chipping Hammer 8,5 J impact energy for effortless chipping Soft hammer mode reduces blow energy for chiselling in sensitive materials AVS anti-vibration system significantly reduces vibration for user comfort and safety Soft start for precise start of chiselling AEGMH5E 720 W Self Drilling Screwdriver Compact pocket drill/screwdriver measuring only 160mm 17 stage torque adjustment plus additional drilling stage Industrial metal gearbox and gears for superior durability FIXTEC spindle lock and keyless 10mm chuck Electronic switch with variable speed Built in LED light illuminates the work surfaces AEGBS12C2 395 - 605m TOOT2806 GARAGE & AUTOMOTIVE Great Brands • Great Value 630 W Percussion Drill 720 W SDS-Plus Combi Hammer Castor wheels aid in portability around the work area Min Height: 850mm Max Height: 1790mm TOOJ976 Oil Drain Facility 12 Month Warranty 75 L Removable Part Washer power tools TRADEquip POWER TOOLS Compact self drilling screwdriver with high torque for self tapping screws Full metal gearbox for durability Easily adjustable depth-setting nosepiece for consistent fastener depth Forward and reverse mechanism Ergonomic design and soft-grip for comfortable handling 1⁄4˝ Hex bit reception Belt clip 12 month warranty AEGS2500E 14V Cordless Drill Compact & powerful for completion of all jobsite applications 36 Nm maximum torque delivers complete power (32 Nm NiCd) 2-speeds – 0–400/0–1500 rpm (0–1400 rpm NiCd) 24-stage torque adjustment for complete control FIXTEC 13 mm single sleeve chuck with full metal jaws (10 mm NiCd) AEGBSB14G2NC-142C 18V Cordless Drill New poles frameless motor and compact gear box Compact & powerful for high torque applications Brushless motor - 60 Nm (2.0 Ah) / 70Nm (4.0 Ah) maximum torque delivers complete power 2-speeds - 0-450 / 0-1650 rpm 24 stage torque adjustments from complete control FIXTEC 13 mm keyless chuck, with spindle lock LED - for work place illumination AEGBSB18G2 AEG POWER TOOLS Great Brands • Great Value 37 POWER SAWS GRINDERS & SANDERS 12 Month Warranty 12 Month Warranty 2200 W Small Angle Grinder 2200 W Large Angle Grinder 2400 W Large Angle Grinder Metal gearbox for durability Directed air exhaust Gear head rotates at 90 intervals for added versatility Flat metal gear head for excellent visibility of work piece and optimised cutting depth Protected air inlets Spindle lock AEGWS6-115 power tools Powder field coating for long life time Machined steel gears for highest durability Compact ergonomic design with softgrip on main handle for more comfortable work External brush doors for fast brush replacement AEGWS2200-230 1600 W Circular Saw 0-56 degree bevel capacity with 45 degree positive stop Die cast shoe and guard. More durable and stable Large action levers for easy operating Micro texture grip on front and back handle 4 m cable Dust port with DEK 26 connection to our AEG dust extractors AEGKS66-2 Powder field coating for long life time Machined steel gears for highest durability Compact ergonomic design with softgrip on main handle for more comfortable work External brush doors for fast brush replacement AEGWS11-115 Armoured protection for armature guarantees higher life time Strong angled machined steel gears for best durability and improved life time Compact design ensures better control and ease of use Designed for greater overload capabilities to prevent overheating Keyless guard for faster and easier changing guard direction Anti-vibration handle for comfort AEGWS24-230V 1600 W Circular Saw 0-56 degree bevel capacity with 45 degree positive stop Cutting depth 90-61mm Die cast shoe and guard. More durable and stable Large action levers for easy operating Micro texture grip on front and back handle 4 m cable AEGKS66C Die Grinder Variable speed electronic Long spindle for easy access to awkward places Double bearing spindle seating for smooth rotation Automatic cut-off carbon brushes, High rotation precision metal gearbox AEGGSL600E Compound Mitre Saw Powerful 1800 watt motor delivers 4400 rpm Large cutting capacities include a massive maximum crosscut of 343 x 111 mm at 90° Double bevel 0–47° left or right Mitres 60° left or right, perfect for awkward mitres Rugged cast construction with huge table area Cam operated mitre lock for fast angle adjustment AEGPS305DG 2300 W Abrasive Metal Chopsaw –45/0/45 mitre capacity with quick release mitre clamp Spindle lock for easy wheel and accessory changing Deflector protects the user from sparks Oversize guard for added safety On board wrench storage Rubber feet for greater stability Replaceable carbon brushes AEGSMT355 power tools 720 W Small Angle Grinder 1800 W Table Saw Orbit Sander Dual orbits for control of material removal Variable speed for optimum control Soft start and pad brake for a gauge free workpiece Dust extraction, with dust bag or absorption system AEGOSS-2590V 750 W Planer 1010 W Belt Sander Left and right chip ejection for greater convenience Heel shoe protects the base, blade and work surface 0,2 mm stage depth adjustment setting for greater control and accuracy Depth scale indicator AEGPL750 38 1500 W Heat Gun Electronic speed for control and optimum results Clamping lever for easy, tool free changing of sanding belt Externally accessible brushes for easy replacement Control wheel for precise adjustment of sanding belt Compact design, ideal for sanding close to edges Die-cast construction for high strength and durability Dust extraction, with dust bag or absorption system AEG100E Anti slip surface for better grip 2 Adjusting temperature settings: 300/560 C degrees 253/420 litres per minute of air flow Robot fan for contnuous operation Extremely light Designed to stand on its own for hand free operation AEGHG560D Multi Toolkit 12 V bases with interchangeable heads Ideal for working in awkward spaces Angle drilling head with 10mm rapid-action chucks Electronics with speed control and overload protection Powerful 12 V Li-ion rechargeable batteries AEGBWS12C AEG POWER TOOLS Great Brands • Great Value 4800 rpm for effortless accurate cutting 90 mm cutting depth Dual clamping parallel fence for high stability and accuracy Intergrated table side extention up to 645 mm gives huge cutting capacity Collapsible stand with wheels and height adjustment for easy transportation and portability On board storage for all tools and spare blades AEGTS250K AEG POWER TOOLS Great Brands • Great Value 39 WOOD WORKING POWER TOOLS 24 Month Warranty 24 Month Warranty 650 W Angle Grinder 500 W Impact Drill MCOP1573 Well balanced design for easy operation. 115mm Disc Ø Ergonomic handle MCOP1574 710 W Impact Drill 850 W Angle Grinder Disc Ø: 115mm MCOP1593 power tools 2200 W Angle Grinder 900 W Impact Drill  isc Ø: 230mm D Variable speed Soft start 2 Stage safety switch MCOP1588 13mm Chuck, Variable speed Hammer action MCOP1592 2200 W Angle Grinder 550 W Rotary Hammer Drill SDS Chuck, Variable speed Chisel/hammer action Power indicator MCOP1583 Disc Ø: 230mm Variable speed Soft start 2 Stage safety switch Industrial quality bearings & gears MCOP1627 500 W Drill & 650W Angle Grinder Combo Ni-CAD battery 10mm Chuck Hammer Action Forward & reverse action Multiple torque settings 3 - 5 Hours charge time MCOP1586 40 18 V Cordless Drill 2 x 18 V Ni-CAD batteries 10mm Chuck 20+1 Torque Battery indicator level 25 Nm Max torque force 3 - 5 Hours charge time MCOP1572 380 W Rotary Sander Pad diameter: 125mm Variable speed Includes sanding disc & dust bag MCOP1581 900 W Belt & Sander 76 x 533mm Belt (included) Includes dust bag MCOP1575 400 W Jigsaw 500-2900-1, Variable speed: 5 speed, Dust extraction port Lock on function MCOP1587 710 W Jigsaw 0-3 000-1, Variable speed: 5 speed Quick release blade system, Pendulum action MCOP1571 710 W Electric Planer 82mm Planing width 0-2mm Cutting depth MCOP1585 18 V Cordless Drill 2 x 18 V Lithium batteries 10mm Keyless chuck LED Light 3 - 5 Hours charge time Forward & reverse action MCOP1635 1200 W Polishing Sander 1 Wool bonnet and rubber pad Wheel Ø: 180mm, Variable speed Quick change brush cap MCOP1590 1200 W Circular Saw Blade Ø: 185mm MCOP1628 500 W Laminate Trimmer Includes 6.3mm collet Ergonomic design Soft touch MCOM1253 Industrial use, SDS Chuck Variable speed Double anti-vibration system Auto stop carbon brushes MCOP1595 180 W Multi-scraper with Saw 400 W Power File Precision cutting saw blade Handy sander MCOP1579 130mm Bar length Ideal for sanding, scraping & sharpening MCOP1582 1250 W Router 250 W Belt & Disc Sander 900 W Biscuit Jointer 100mm Ø Blade 19mm max working depth Adj.cutting angle from -45º to 90º Soft grip handle MCOM1108 4.8 V Cordless Screwdriver 700mAh Ni-CAD battery Max torque force: 2.5Nm Charging time: 3-5hrs MCOP1596 FRAGRAM POWER TOOLS Great Brands • Great Value Sanding surface: 90 x 187mm 5 Speed, Dust extraction port Lock on function MCOP1629 1250 W Rotary Hammer Drill Angle grinder: Disc Ø: 115mm Impact Drill: 13mm Chuck MCOP1584 18 V Cordless Drill 150 W Finishing Sander power tools 13mm Chuck, Variable speed Hammer action MCOP1591 Includes a 6mm & 8mm collet adaptor MCOP1624 Disc Ø: 125mm, 25 x 762mm Belt Adjustment knob, Fast tracking MCOP1576 FRAGRAM POWER TOOLS Great Brands • Great Value 41 POWER TOOL ACCESSORIES POWER TOOLS & ACCESSORIES 12 Month Warranty Blade Bore Steel Cutting Discs 115 x 22mm Dry TOOB200 115 x 22mm Wet/Dry TOOB201 1400 W Mitre Saw Blade Ø: 210mm, 2m Cable MCOW4286 1800 W Mitre Saw Blade Ø: 255mm, Aluminium base 2m Cable MCOW4287 350 W Drill Press 2200W Cut Off Saw Disc Ø: 355mm 100mm Cutting Capacity MCOW4265 90W Scroll Saw Variable Speed, 127mm blade Max. cutting thickness: 50mm MCOP1577 550 W Bench Drill Press power tools 5 Speed spindle 13mm Chuck 50mm Drilling depth B16 Taper spindle MCOD402 550 W Pedestal Drill Press Max drilling: 16mm Spindle speed: 180-2770 / 220-3320rpm MCOD403 Floor standing 85mm Spindle travel Max Drilling Ø: 16mm 180-2770/2203320min-1 spindle speed 1580mm High Ø290mm Table size MCOD404 19 Piece HSS Drill Bit Set Titanium coated in metal box 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10 mm TOOD418A 25 Piece HSS Drill Bit Set 250 W Bench Grinder WIth magnifying glass & safety cover, Ø150 x 20 x Ø12.7 2850 min-1 1/3HP Fast grinding, Heavy duty base MCOG724 170 W Die Grinder Variable speed Blow moulded carry case Includes 40 bits & accessories MCOP1578 13 W Electric Engraving Tool Titanium coated in metal box 1.0 - 13 mm in steps of 0.5 mm TOOD434A 6 x Torx bits: T15, 20, 25, 27, 30, 40 5 x Hex bits: 2.5, 3, 4, 5, 6 mm 3 x Pozi bits: Pz1, 2, 3 3 x Phillips bits: PH1, 2, 3 3 x Slotted bits: 4, 5, 6mm TOOS1651 Blowing & vacuum action 2.3 m min3 blow rate Lock on function, 8kg Net weight MCOP1494 42 2000 W Heat Gun 2 Heat settings, 2 nozzles MCOP1623 13 Piece HSS Drill Bit Set 1.5 mm - 6.5 mm TOOD308 300 Piece Drill Bit Set Ass 5,6,8 & 10mm wall plugs 7x HSS bits (2-10mm), 5x woodworking bits (2-10mm) 5x masonry bits (2-6mm) bit holder 2x slotted bits 2x phillips, 2x pozzi bits TOOD417 FRAGRAM POWER TOOLS Great Brands • Great Value Chuck Keys 10mm TOOK1045 13mm TOOK1046 Chuck Key Masters 86 Diff TOOK1036 127 Diff TOOK1038 T41S - 100 x 2.5 x 16mm TOOW4407 T41S - 115 x 3 x 22.2mm TOOW4396 T41S - 180 x 3 x 22.2mm TOOW4411 T41S - 230 x 3 x 22.2mm TOOW4397 T42A - 115 x 3 x 22.2mm TOOW4395 T27A - 125 x 6.5 x 22.2mm TOOW4412 13mm TOOC111 Mini Grinder Access Kit 105 Piece TOOE497 16mm TOOC109 6mm TOOC109B 3/8” x 24 UNF 1.5 - 10mm TOOC109C 1/2” x 20 UNF 1.5 - 13mm TOOC109D Masonary Grinding Wheels T27S - 125 x 6.5 x 22.2mm TOOW4409 Polish Bonnet Velcro Tie Up TOOB152 TOOB151 Brass Cup Brush Wingnut 3" M14 TOOW4384 4” M14 TOOW4385 7 Blade Deep Hole Saw Suitable for cutting wood, wall-board, chipboard & plastic TOOS1739 Jigsaw Blades for MCOP1571 & MCOP1587 100mm HCS Blade For Wood 8 TPI For Basic Wood L=74mm P=3mm P3, TOOB140 6 TPI For Basic Wood L=74mm P=4mm P3, TOOB141 110mm HCS Blade 7 Blade Shallow Hole-Saw Suitable for cutting wood, wall-board, chipboard & plastic TOOS1740 115 x 1.6mm SUPERFLEX TOOW4366 Steel Grinding Wheels Keyless Chuck Chuck & Key Slimline Cutting Disc 3 Piece Wire Brush Set For Wood 10 TPI For Basic Wood L=82mm P=2.5mm P3, TOOB143 TOOW4402 76mm HSS Blade For Metal 21 TPI For thin sheet metal P3 L=52mm P=1.2mm TOOB146 100mm Bi-Metal Blade For Hard wood 6 TPI For hard wood L=74mm P=4mm TOOB145 P3 100mm Bi-Metal Blade For Thick sheet metal 12 TPI For thick sheet metal P3 L=74mm P=2mm TOOB148 11 Piece Hole Saw Kit Variable speed Precision engraving TOOE503 20 Piece Power Bit Set 600W Electric Blower 230mm Diamond Blade Dry TOOB204 230mm Diamond Blade Wet TOOB205 Masonry Cutting Discs T41A - 100 x 2.5 x 16mm TOOW4399 T41A - 115 x 3 x 22.2mm TOOW4393 T41A - 180 x 3 x 22.2mm TOOW4410 T41A - 230 x 3 x 22.2mm TOOW4394 T41A - 350 x 3 x 25.4mm TOOW4398 T41A - 125 x 6.5 x 22.2mm TOOW4408 power tools 12 Month Warranty 8 carbon steel hole saws 19, 22, 28, 32, 38, 44, 51, 64mm TOOS1730 Sanding Belts For MCOP1576 Sand Paper For MCOP1629 93 x 185mm 150# TOOW1054 93 x 185mm 180# TOOW1055 93 x 185mm 220# TOOW1056 Sanding Belts For MCOP1575 76 x 533mm 60# TOOW1042 76 x 533mm 80# TOOW1043 76 x 533mm 100# TOOW1044 16 Piece Hole Saw Kit 8 carbon steel hole saws 19, 22, 28, 32, 38, 44, 51, 64, 76, 88, 102,127mm TOOS1731 762 x 25mm 60# TOOW1045 762 x 25mm 80# TOOW1046 762 x 25mm 100# TOOW1047 Sanding Belts For MCOP1582 Sand Paper For MCOP1579 80 x 80 x 80mm 80# TOOW1057 80 x 80 x 80mm 100# TOOW1058 80 x 80 x 80mm 120# TOOW1059 Sanding Disc For MCOP1581 125mm 80# 125mm 120# 125mm 180# 125mm 220# TOOW1060 TOOW1061 TOOW1062 TOOW1063 8 x 455mm 60# TOOW1048 8 x 455mm 80# TOOW1049 8 x 455mm 100# TOOW1050 13 x 455mm 60# TOOW1051 13 x 455mm 80# TOOW1052 13 x 455mm 100# TOOW1053 FRAGRAM POWER TOOLS Great Brands • Great Value 43 PADLOCKS / LOCKSETS & ACCESSORIES SAFES & LADDERS 12 Month Warranty Brass Padlock Padlock Diskus Type 70mm TOOL1150 20mm 25mm 32mm 40mm 50mm 63mm Iron Padlock TOOL1314 TOOL1316 TOOL1318 TOOL1320 TOOL1322 TOOL1324 20mm 25mm 32mm 40mm 50mm 63mm TOOL1302 TOOL1304 TOOL1306 TOOL1308 TOOL1310 TOOL1312 cabinet shop Galvanised Short Link Chain TOOC261 TOOC262 TOOC263 TOOC264 TOOC265 32mm 40mm TOOL1331 TOOL1333 Long Shackle Padlock Brass 40mm TOOL1339 Entrance Lockset Stainless Steel Key Hole Blocker Brass TOOL1155 TOOL1130 250 x 350 x 250mm Electronic Safe 200 x 430 x 350 mm Electronic Safe 200 x 310 x 200 mm Electronic Safe 250 x 350 x 300 mm Electronic Safe 200 x 430 x 350 mm Electronic Safe Patented anti-bumping solenoid Manual override key system 2 x Keys supplied Electronic lock Simple to operate Fixing bolts with pre-drilled holes 4 x AA batteries supplied TOOS2133 Motorised door opening Manual override key system 5 mm Door & 2 mm Body Electronic lock Blue backlit LCD display Internal LED lights 1 x 6F22(9V) battery TOOS2136 Antique Copper Patented anti-bumping solenoid Manual override key system External emergency battery override 2 x Keys supplied Electronic lock Fixing bolts with pre-drilled holes 4 x AA batteries supplied TOOS2134 Motorised door opening Manual override key system 5 mm Door & 2 mm Body Electronic lock Blue backlit LCD display One shelf inside Internal LED lights 1 x 6F22(9V) battery TOOS2137 Patented anti-bumping solenoid Manual override key system External emergency battery override 2 x Keys supplied Electronic lock Fixing bolts with pre-drilled holes 4 x AA batteries supplied TOOS2135 Motorised door opening Manual override key system 5 mm Door & 2 mm Body Electronic lock Blue backlit LCD display Internal LED lights 1 x 6F22(9V) battery TOOS2138 TOOL1132 safes 3mm x 2m 4mm x 2m 5mm x 2m 6mm x 2m 8mm x 2m Long Shackle Padlock Iron 180 x 280 x 180 mm Electronic Safe Chrome Plated 5 Lever Mortice Lockset TOOL1153 Brass Plated Mortice Lockset 5 Lever TOOL1153BP Chrome Plated Lockset 2 Lever 3 Lever AWS2690 AWS2691 Multi-Purpose Aluminium Ladder Platform Height: 95.2 cm “A” Ladder Height: 1.6 m Extended Height: 3.3 m Georgian Lock Set 2 Lever SABS Satin Nicol 150mm ACS021 150mm ACS016 SABS Brass Plated 44 Great Brands • Great Value Georgian Lock Set 2 Lever SABS Satin Nicol 200mm ACS022 200mm ACS017 SABS Brass Plated Victorian Lock Set 2 Lever SABS Satin Nicol Victorian Lock Set 2 Lever SABS Satin Nicol SABS Brass Plated Brass Plated 150mm ACS018 150mm ACS014 200mm ACS019 200mm ACS015 PADLOCKS / LOCKSETS & ACCESSORIES Sturdy Double stabilising bar Max safe load: 115 kg 12 Month Warranty TOOL1240 SAFES & LADDERS Great Brands • Great Value 45 PAINTERS’ / STEP LADDERS FIBRE GLASS & HOUSEHOLD LADDERS 12 Month Warranty 12 Month Warranty 5 Step 1.7 m Ladder Platform Height: 629 cm Width: 41 cm Weight: 3 kg Extended Depth: 68 cm Platform Height: 106.5 cm Width: 46 cm Weight: 4.15 kg Extended Depth: 98.5 cm 60 cm Safety Rail Sturdy platform top step Distance between steps: 233 mm Non-slip feet, Lightweight Max Load: 90 kg TOOL1247 60 cm Safety Rail Sturdy platform top step Distance between steps: 233 mm Non-slip feet, Lightweight Max Load: 90 kg TOOL1248 7 Step 2.1 m Ladder 8 Step 2.3 m Ladder Platform Height: 150 cm Width: 50 cm Weight: 5.35 kg Extended Depth: 131 cm Platform Height: 171.8 cm Width: 53 cm Weight: 5.85 kg Extended Depth: 142 cm 60 cm Safety Rail Sturdy platform top step Distance between steps: 233 mm Non-slip feet, Lightweight Max Load: 90 kg TOOL1249 60 cm Safety Rail Sturdy platform top step Distance between steps: 233 mm Non-slip feet, Lightweight Max Load: 90 kg TOOL1250 5 Step 1.5 m Fibreglass Ladder 6 Step 1.8 m Fibreglass Ladder Height: 157 cm Width: 51.5 cm Weight: 7.55 kg Extended Depth: 105.5 cm Height: 184.5 cm Width: 55 cm Weight: 8.95 kg Extended Depth: 119 cm Heavy Duty non-conductive 77 mm Non-slip aluminium steps Double angle bracing Non-slip feet, Lightweight Max Load: 135 kg TOOL1242 Heavy Duty non-conductive 77 mm Non-slip aluminium steps Double angle bracing Non-slip feet, Lightweight Max Load: 135 kg TOOL1243 Aluminium MultiFunction Ladder Auto Locking Hinges 6 Settings High Quality Max Safe Load: 115kg Height: Platform: 1m A” Ladder: 1.8m Extended: 3.7m Width: 38mm Weight: 11.2kg TOOL1133 5 Step Folding Painters Ladder 5 Non-slip steps Paint tray tested to 20kg Paper towel holder Useful tray for paint & tools Max Load: 150kg Height: 165mm Width: 45mm Weight: 12.5kg Extended Depth: 105mm TOOL1176 4 Step Steel Ladder Sturdy Max Load: 150kg Height: 93mm Width: 46mm Weight: 8.95kg Extended Depth: 75mm TOOL1173 115 kg maximum permissable load including tools & materials ladders ladders 3 Step 1.2 m Ladder MEDIUM DUTY Danger Metal Conducts Electricity 9 Step 2.6 m Fibreglass Ladder Height: 266 cm Width: 64.5 cm Weight: 12.6 kg Extended Depth: 170 cm 46 Heavy Duty non-conductive 77 mm Non-slip aluminium steps Double angle bracing Non-slip feet, Lightweight Max Load: 135 kg TOOL1246 7 Step 2.1 m Fibreglass Ladder 8 Step 2.3 m Fibreglass Ladder Height: 211 cm Width: 45 cm Weight: 10.15 kg Extended Depth: 136 cm Height: 238.5 cm Width: 61.5 cm Weight: 11.5 kg Extended Depth: 152.5 cm 2 Step Stool Heavy Duty non-conductive 77 mm Non-slip aluminium steps Double angle bracing Non-slip feet, Lightweight Max Load: 135 kg TOOL1244 Heavy Duty non-conductive 77 mm Non-slip aluminium steps Double angle bracing Non-slip feet, Lightweight Max Load: 135 kg TOOL1245 Dimensions Height: 40cm Width: 43cm Weight: 3.7Kg Depth: 61cm TOOL1134 LADDERS Great Brands • Great Value Do not lean Sturdy construction Easy storage 3 Step Ladder Rigid construction Heavy duty rivets TOOL1178 2 Step Ladder Rigid construction Heavy duty rivets TOOL1177 Do not descend backwards Only one person allowed Only use with legs extended LADDERS Great Brands • Great Value 47 CHAINSAWS & WASHERS POWER GARDEN 12 Month Warranty 1350 W Pressure Washer Rated pressure 65 bar Allowable pressure 95 bar Water consumption 360L/h Max pressure water supply 3 bar Brush motor MCOP1507 12 Month Warranty 1000W Electric Lawn Mower  000 W Electric Lawn 1 Mower & 250 W Line Trimmer Plastic deck light and easy to store Mower has 30 L canvas grass catcher Mower cutting height 27/45/62mm MCOM1244 Plastic deck light and easy to store Mower has 30 L canvas grass catcher Mower cutting height 27/45/62mm Line trimmer cutting diameter 250mm Light and easy to use Tap & feed line system Line 1,2 mm MCOM1246 1800W Electric Lawn Mower Plastic grass box 460mm cutting width Central height adjustment 25-75 mm Ball bearing wheels Wheel size rear 8” front 6” MCOM1263 99 cc Petrol Lawn Mower 123 cc Petrol Lawn Mower Plastic deck UV protection Cutting width 398 mm 40L Plastic grass catcher Individual wheel 6 stage height Rear wheel 7” front 6” 3-in-1 Collecting mulching rear discharge 4 Stroke engine MCOM1242 Cutting width 498mm 50L canvas grass catcher 4 Stroke engine Cutting height 28-63mm(6 stages) Steel deck, Soft grip handle Straight blade MCOM1251 1850 W Pressure Washer Rated pressure 95 bar Allowable pressure 140 bar Water consumption 360L/h Max pressure water supply 3 bar Brush motor MCOP1508 1600 W Electrical Chainsaw  regon bar & chain O Bar length: 14” No load speed: 8800/min Automatic oil lubrication Chain brake activates in less than 0.15 seconds MCOM1240 1800 W Electrical Chainsaw  regon bar & chain O Bar length: 14” No load speed: 7600/min Automatic oil lubrication Chain brake activates in less than 0.15 seconds MCOM1248 2200 W Pressure Washer Induction Motor Rated pressure 110bar Allowable pressure 160 bar Aluminium pump Strong aluminium alloy handle with soft touch grip design 5m Mains cable and waterproof plug Built in detergent tank Lance with variable high /low pressure nozzle with auto stop system MCOP1510 250 W Electric Line Trimmer Cutting diameter 250 mm Light and easy to use Tap & feed line system Line 1,2 mm MCOM1245 9HP Pro-Power Commercial Cold Water Pressure Washer Cutting width 310 mm Telescopic tube 23,5 cm No load speed 1000/ min Copper winding MCOM1241 power garden 1000 W Electric Line Trimmer Top motor for balance Cutting diameter 350 mm No load speed 9000/ min Ergonomically designed Tap & feed line system MCOM1256 38 cc Petrol Chainsaw 42 cc Petrol Brush Cutter Straight shaft design Low vibration Blade 255mm and line 380mm option Heat tolerant alloys used in the gear box and centrifugal clutch housing 2 Bearings in the centrifugal clutch Spline has 9 gears for better torque Ngk spark plug, Ergonomic grip Fuel tank capacity 1 L MCOM1258 32cc Petrol Brush Cutter 25 cc Petrol Line Trimmer 2 Stroke engine Cutting diameter 430mm Easy start engine 48 Euro 11 emission engine Cutting line 2mm No load speed 7300/min MCOM1257 Straight shaft design Low vibration Blade 255 mm and line 380 mm option 2 Bearings in the centrifugal clutch Spline has 9 gears for better torque Ngk spark plug / Ergonomic grip Fuel tank capacity 0.8725 L / Free face safety shield MCOM1243 POWER GARDEN Great Brands • Great Value  asy start technology E Automatic chain oiler Safety chain brake 16” Oregon bar/chain Anti vibration system Large claw stop safety trigger Anti kick-back chain Auto choke release MCOP1661 50 cc Petrol Chainsaw  asy start technology E Automatic chain oiler Safety chain brake 18” Oregon bar/chain Anti vibration system Free safety goggles Eco boost engine for lower emissions/increase power and reduce fuel consumption Anti kick-back chain Large claw stop safety trigger MCOP1662 500 W Electrical Hedge Trimmer Cutting width 490mm Toothspace 16mm Front hand guard protection Double action cutting blade MCOM1259 15L/min rated flow 270cc Power MCOP1503 12HP Pro-Power Commercial Cold Water Pressure Washer 18.2L/min rated flow 389cc Power MCOP1504 power garden 500 W Electric Line Trimmer 2500 W Shredder Induction Motor Cutting diameter 40mm Idle speed 4500/ motor blade shredder Wheels for easy manoeuvring Cuts solid wood into chips Reduces volume of trimmings by 75% MCOM1239 2600 W Blower Vacuum 3-in-1 Function Variable speed 45L dust bag No load speed 15000/min Accessories set of wheels Shoulder belt Collection bag MCOM1249 POWER GARDEN Great Brands • Great Value 49 GARDEN HAND TOOLS GARDEN TOOLS 12 Month Warranty 12 Month Warranty 53 cm Push Sweeper Easy dial-in-height adjustment Fold down for compact storage Can hang on the wall Multifunctional super grabbing brushes for collecting leaves MCOM1238 Hand Fork 9 Teeth Hand Fan Rake Hand Weeder Garden Hand Trowel Garden Hand Fork 5 Teeth Rake Garden Hand Weeder Garden Hand Transplanter Hand Garden Digger & Hoe Garden Hand Cultivator TOOG805 3 Piece Garden Hand Tool Set 15” Mini Lopping Shear Trimming Line TOOG792 TOOG802 35.5 cm Push Mower Plastic grass catcher 3 Spiders & 5 blades Light weight easily stored Environmentally friendly No fuel or electricity required MCOM1252 Hand Trowel TOOR1517 Plastic Rake TOOR1523 Rubber Rake 1 kg Hatchet Wood handle TOOH838 1.8 kg Felling Axe Wood handle TOOH841 TOOG796 TOOG797 TOOG804 TOOR1522 TOOR1519 16 Teeth Wooden Handle Rake Steel Digging Spade Steel Round Nose Shovel TOOS3114 TOOG801 TOOG791 16 Teeth Metal Rake TOOG803 Metal Fan Rake Head TOOG795 TOOG793 TOOG800 TOOR1514 Straight Blade Hedge Shear 300mm TOOH851 Powder coated TOOS3115 Ladies Garden Glove Steel Square Mouth Shovel TOOG725 Powder coated TOOS3117 Wavy Blade Hedge Shear 300mm TOOH852 TOOH857 600mm Lopping Shear TOOH858 Size: 1.6mm Ø x 12m TOOL1157 Trimming Line 2.0mm Ø x 10m TOOL1157A Trimming Line garden tools Short Handle Cane Knife TOOG855 50 Corn Knife TOOG854 Steel Garden 4 Prong Fork Welded handle TOOS3118 GARDEN TOOLS Great Brands • Great Value Grass Slasher With plastic handle TOOS1764 200mm Deluxe Bypass Pruner Ideal for precision pruning of live/ soft stems TOOK2040 Pruning Shear TOOS1750 Ladies’ Pruner Ideal for precision pruning of live/ soft stems TOOK2042 Sheep/Grass Shears garden tools 2.4mm Ø x 6m TOOL1157B TOOS1729 GARDEN TOOLS Great Brands • Great Value 51 MAINTENANCE & ACCESSORIES WHERE TO FIND US WELKOM 12 Month Warranty Amajuba Mall Parking Victoria Rd NEWCASTLE out Parking in Virginia Jan Hofmeyer Rd Welkom Jan Hofmeyer Rd Allen St Amajuba Mall, Corner of Victoria Rd and Allen St, Newcastle 137 Jan Hofmeyer Rd, Voorspoed, Welkom 500 ml Trigger Sprayer 1 L Trigger Sprayer TOOG816 1.5 L Pressure Sprayer TOOG817 5 L Pressure Sprayer PIETERMARITZBURG Adjustable nozzle / Trigger lock TOOG818 Brass fittings Lever, lance & arm clamps for easy transportation Large capacity & highly resistant pressure chamber Durable plastic finish Lightweight TOOG819 Universal Pressure Sprayer TOOG846 12L Galvanised Bucket TOOG895 Victoria Rd. Greyling St. CONTACT DETAILS Boshoff St. 16L Knapsack Pressure Sprayer Stantial St. TOOG815 340 Victoria Road, PMB (Next to Jowetts Cycles) 10 L Galvanised Water Can TOOK2115 Garden Hosepipe without Fittings 25 m x 13 mm TOOG820 30 m x 20 mm TOOG826 100 m x 13 mm TOOG825 Garden Hose With Fittings 30 m X 20 mm TOOG827 Garden Hosepipe with Fittings 25m x 13mm TOOG821 garden tools Letterboxes Electro Galvanised Plastic Rain Gauge 500mm x 350 ml AGS6242 Econo Letterboxes AWS2651 Black AWS2652 White CALL 0860 586 657 AWS2653 Black AWS2648 Blue AWS2650 Red AWS2649 Green Great Brands • Great Value 52 GARDEN TOOLS Great Brands • Great Value www.justtools.co.za SEE WEBSITE FOR TRADING HOURS. JustToolsSA Copyright: This document remains the property of Just Tools. This document is privileged and for the use of the recipient only. Unauthorized use, disclosure or copying of the contents of this document, or any similar action is prohibited. This restriction is applicable to all product catalogues, product images and design elements. Product Catalogues, product images and design elements remain the property of Just Tools and their contents shall not be duplicated without written consent from Just Tools Marketing.