Transcript
www.hertzaudiovideo.com
dieci
120 watt
Technical Specifications Component
peak continuous program
120 60
Impedance
Ohm
Frequency response
Hz
Sensitivity
dB/SPL
91
Woofer outer diameter
mm
130
Woofer mounting mm hole diameter
119
Woofer magnet size
mm
70
Woofer total depth
mm
56
Woofer mounting mm depth
52
Weight of one woofer
4 60-21k
0,555
kg
DV 130 Electro-Acoustic Parameters D
mm
102
Xmax
mm
2
Re
ohm
3,2
Fs
Hz
Le
mH@1kHz
0,56
Le
mH@10kHz
0,17
Vas
lit
8,76
Mms
gr
6,3
Cms
mm/N
0,94
T-m
3,61
BL
0,59
Qes
0,63
Qms
8,96 dB
• • • • • • • • • • • •
Mylar dome tweeter. 15mm ø, ultra-light ferrofluid-cooled mobile voice coil. High energy neodymium magnet. Support with accessories for external or embedded mounting. Low carbon content plates for maximum magnetic permeability and high heat dissipation. Very big magnet for mobile voice coil control. Pure copper voice coil, wound on paper former, for maximum lightness. Copper-covered central pole; it provides extremely linear impedance and permit to easily drive the speaker. Water-repellent treated paper cone. Central phase plug, for the best off-axis response at mid-high frequencies. DIN size basket protected by abrasion-proof dust paint. Gold-plated, high current terminals. Silver-plated lead wires for maximum reliability and conductivity. High density rubber surround, glued with heat resistant adhesive. FOAM surround, glued with heat resistant adhesive. Butyl rubber protective ring, against crashes and abrasions. Epoxy glue for basket and motor system perfect coupling.
65
Qts
Spl (1m/2,83V)
• • • • •
91
4,7µF
0,1mH
DT 16
0,22mH
DV 130 DV 165
52 56
- 62018 Potenza Picena (MC) Italy - Tel. +39 0733 870870 - Fax +39 0733 870880 - www.elettromedia.it
07/06/2004
Power Handling (Watt)
2 way system DV 130 woofer 130 mm (5”1/4) DT 16 tweeter 15 mm (19/32”)
ø 119 ø 130
Size
