12226

Transcript

24 Parts List Model 12226 DRAWING NO. 1 4 4 10 3 See Drawing 4, Ref. 47, for attachment screw. Parts List 25 Model 12226 PARTS LIST - DRAWING NO. 1 REF No. PART No. 1 2 3 3A 4 5 5A 6 7 8 9 10 13 1918219 9126 1918218 1918334 1916928 1186347 9955 1900475001 1100046 9904 9837 1918791 9442 14 9057 DESCRIPTION Handlebars–(Incl. Refs. 2, 3 and 3A)... Grip ..................................................... Decal–Wheel Engage ........................... Decal–Logo ......................................... Decal–Bail Drive................................... Height Adjustment Flange Screw ........ Keyed Washer...................................... Bracket–Handlebar height adjust ......... Hex Hd. Screw, 3/8-16 x 1*................. Plain Washer (flat), 3/8, S.A.E. ............ Hex Locknut, 3/8-16 ............................ Cable, Forward Clutch Control ............. Wheel Gear Control & Cable Assy. (Incl. Refs. 14, 15, 19, 21, 22 and 23) ....................................... Knob–Wheel gear control lever............ * Specify GRADE 5 if ordering part locally. QTY. 1 2 1 1 2 1 1 1 2 2 2 1 1 1 REF No. PART No. 15 1186211 16 17 19 21 22 23 24 25 1100068 1100243 1735531 1114748 1100240 1186208 9390 1918840 35 36 42 9853 20806 1100805 DESCRIPTION Hex Nut, 5/16-24 – Wheel gear cable adjustment.............................. Hex Hd. Screw, 3/8-16 x 3/4*.............. Lockwasher, 3/8 .................................. Plastic Tie ............................................ Round Hd. Screw, #10-32 x 1/2 .......... Lockwasher, #10 ................................. Hex Nut, #10-32 .................................. Grip–Lever........................................... Lever–Forward Clutch Control (Incl. two Grips, Ref. 24) .......................... Sems Nut............................................. Bracket–Bail support ........................... Hex Flange Screw, self-tapping, 1/4-20 x 1/2* ................................... QTY. 2 2 2 2 6 2 2 2 1 4 2 2 26 Parts List Model 12226 DRAWING NO. 2 REF No. PART No. 1 1918343 2 3 1100243 2527 4 5 6 7 8 9 10 90038 9811 1100069 9384 9438 9308 1117A 11 9120 DESCRIPTION Tine Hood (Incl. hood flap and Refs.17, 20, 21, 22 & 23)................ Lockwasher, 3/8.................................. Bracket–Hood & Depth Regulator (Incl. Ref. 9) ................................... Screw–flanged hex hd., 5/16-18 x 5/8* Hex Locknut, 1/4-20 ........................... Hex Hd. Screw, 1/4-20 x 1* ................ Spring–Depth regulator plunger.......... Spacer................................................. Roll Pin–1/4 x 1 (spiral) ...................... Bar Assembly–Depth adjustment (Incl. Refs. 11 and 12) .................... Ring–Retaining, tolerance ring............ * Specify GRADE 5 if ordering part locally. QTY. 1 2 1 2 1 1 1 1 1 1 1 REF No. PART No. 12 13 14 15 16 17 18 9119 1100043 1113-1 1186231 20775 1916418 9553 19 9552 20 21 22 23 1918337 1916417 1916420 1916423 DESCRIPTION Knob–Depth regulator (Incl. Ref. 11) .. Hex Hd. Screw, 3/8-16 x 1-1/4*.......... Bushing–Spacer.................................. Hex Nut, 3/8-16................................... Drag Bar ............................................. Decal–Thrown Objects ........................ Hex Hd. Screw, self-tapping, 5/16-18 x 1/2* ................................ Screw–flanged hex hd, self-tapping, 1/4-20 x 1/2* .................................. Decal - Hood Logo .............................. Decal - Read Owner’s Manual ............. Decal - Maintenance Safety................. Decal - Rotating Tines......................... QTY. 1 2 2 2 1 1 2 2 1 1 1 1 Parts List 27 Model 12226 DRAWING NO. 3 REF No. PART No. 1 2 3 ------4 5 6 7 8 9621 9511 1166-1 1166-2 1166-3 1166-4 1086 2494 9373 20914 9935 DESCRIPTION Oil Seal .............................................. Ring–Retaining, heavy-duty, ext........ Shim–1-1/64 I.D., .062 thick ............. Shim–as above, but .030 thick .......... Shim–as above, but .015 thick .......... Shim–as above, but .010 thick .......... Bushing ............................................. Wheel Shaft (axle)–Incl. Ref. 6.......... Key–Hi-Pro, 1/4 x 1-5/16................... Gear–Wheel drive (worm gear) ......... Shim–1.016 I.D. x 1.468 O.D. x .062 thick ...................................... * Specify GRADE 5 if ordering part locally. A/R - As Required QTY. 2 2 A/R A/R A/R A/R 2 1 1 1 1 REF No. PART No. 9 10 11 12 13 14 15 16 17 18 19 20712 20879 1442 9055 9622 20757 11000804 97074 20896 1104 20913 DESCRIPTION Clutch–Wheel drive, cast iron............ Eccentric Shaft–Wheel clutch............ Pin–Eccentric shaft............................ Spring ............................................... Oil Seal–Eccentric shaft..................... Lever–Eccentric shaft ........................ Hex Hd. Screw, 1/4-20 x 1/2* ........... Ball Bearing ....................................... Tiller Shaft–Incl. Ref. 18.................... Key–Woodruff, 1/4 x 1-1/4................ Worm Gear–bronze, tiller drive ......... QTY. 1 1 1 1 1 1 1 2 1 1 1 30 Parts List Model 12226 DRAWING NO. 5 NOTE 1–Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005.010) end play on drive shaft. REF No. PART No. DESCRIPTION QTY. REF No. MAIN DRIVE SHAFT ASSEMBLY 1 2 3 4 1714 20718 9301 11603 5 1224-1 5 1224-2 5 1224-3 ... 1325C Bearing–Tapered roller with race ............ 1 Gear–Spur, main drive shaft ................... 1 Key, 3/16 sq. x 1 ..................................... 1 Drive Shaft–with integral, single-lead worm at front and six-lead worm at rear (includes pressed-on #1714 rear roller bearing, race for bearing and #9301 key) ...................... 1 Shim–Rear bearing cap, .010 thick (see Note 1) .................................... A/R Shim–same as above, but .030 thick (see Note 1) .................................... A/R Shim–same as above, but .005 thick (see Note 1) .................................... A/R Shim Set–includes the following shims: two 1224-1; two 1224-2; one #1224-3 ................................... A/R * Specify GRADE 5 if ordering part locally. A/R - As Required PART No. DESCRIPTION QTY. INPUT PINION SHAFT & GEAR ASSEMBLY 6 7 9572 9944 8 9 10 11 12 13 14 15 16 17 18 19 1108841 20880 1440 85030 9500 9953 9428 9677 20791 20792 9093 20799 20 9517 Hex Hd. Screw, 5/16-24 x 1-1/8* ........... 1 Washer–Disc spring (concave surface faces pulley)........................... 1 Key, 3/16 sq. x 1-1/2.............................. 1 Pulley–Transmission drive ..................... 1 Support Washer ..................................... 1 Oil Seal–Input pinion shaft, front............ 1 Ring–Retaining (snap ring), external...... 1 Thrust Washer........................................ 2 Bushing.................................................. 1 Set Screw, 5/16-18 x 3/8*...................... 1 Input Pinion–steel shaft ......................... 1 Gear–Input pinion .................................. 1 Retainer–Snap ring, external .................. 1 Pinion Assy–(Incl. one each of Ref. No.’s 16, 17 and 18 ......................... A/R Retainer–Snap ring, internal................... 1 34 Parts List Model 12226 DRAWING NO. 8 NOTE 1: These screws are a special sealing screw that cannot be reused without risking the loss of transmission oil. If these screws are loosened or removed, they must be replaced with new hardware. REF No. PART No. 1 2 3 4 5 6 9621 9726 97076 1186329 85030 11513 7 8 20694 20893 9 10 9467 20889 DESCRIPTION Oil Seal–double lip, wheel shaft ................... Pipe Plug, 1/4 .............................................. Seal–Transmission bore .............................. Screw–flanged hex hd., 5/16-18 x 3/4* ....... Oil Seal–input pinion shaft........................... Cover–Top of transmission (incl. four of Ref. No. 18 and two each of Ref. No.’s 21 and 22) ............................................... Gasket–Transmission top cover .................. Transmission case, tube and rear housing assembly ................................................. Plug–gear oil fill hole ................................... Plate–wheel drive cable mounting ............... * Specify GRADE 5 if ordering part locally. QTY. REF No. PART No. 2 2 1 6 1 11 12 13 14 15 97073 90038 20873 1129-1 1915089 1 1 16 17 18 19 1115 1124-2 1186331 1915087 21 22 1100243 1100068 1 1 1 A/R – As Required DESCRIPTION QTY. Oil Seal–tiller shaft....................................... 2 Screw–flanged hex hd., 5/16-18 x 5/8* ....... 2 Cover–tiller housing, left-side...................... 1 Gasket–tiller housing cover, .010 ............. A/R Screw Kit: includes three (3) 1/4-20 x 7/8 self-sealing screws ............................... A/R Cap–Rear bearing ........................................ 1 Gasket–Rear bearing cap, .010 thick ........ A/R Screw–flanged hex hd., 5/16-18 x 1* .......... 4 Screw Kit: includes five (5) 1/4-20 x 5/8 self-sealing screws ............................... A/R Lockwasher, 3/8 .......................................... 2 Hex Hd. Screw, 3/8-16 x 3/4*...................... 2 28 Parts List Model 12226 DRAWING NO. 4 5 36 6 13 1 2 7 3 4 8 35 9 10 11 12 39 40 35 41 40 46 42 48 45 49 50 37 20 37 51 22 44 38 43 12 43 8 47 44 9 25 31 23 26 27 30 3 28 29 Parts List 29 Model 12226 PARTS LIST - DRAWING NO. 4 REF. No. PART No. 1 2 3 4 5 6 7 8 9 10 11 12 13 19 20 22 23 25 26 ** 1917326 1100242 1111696 1904557 1918344 1186391 1108841 1138-1 1916520 9944 9572 1916421 1917746 9929 1916522 1440 1909404 1900396 27 1916189001 DESCRIPTION Engine – standard recoil start ............ Bracket, Clutch Cable .......................... Lockwasher–5/16................................ Hex Hd. Screw, 5/16-24 x 1/2 ............. Decal, Hot Surfaces/Belt Warning ....... Cover (Incl. Refs. 5 & 13) ................... Flange Lock Nut, 5/16-18.................... Key, 3/16 x 1-1/2 ................................ Shim ................................................... Pulley, Engine Drive ............................ Belleville Washer................................. Hex Hd. Screw, 5/16-24 x 1-1/8.......... Decal - Belt Pinch Point ...................... Washer, Shoulder ............................... Washer, Flat, 1-1/8.............................. Transmission Pulley............................ Support Washer .................................. Forward Clutch Belt............................. Hex Hd. Screw, #10-32 x 1/2, self-tapping ..................................... Guard, Belts/Pulleys............................ QTY. 1 1 6 2 1 1 2 2 1 1 2 2 1 1 1 1 1 1 4 1 * Specify GRADE 5 if ordering part locally. ** See your local authorized engine service dealer for engine parts or service. Refer to engine nameplate for engine type and code information. REF. No. 28 29 30 31 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 PART No. 1186230 1186329 1916797001 1916796001 1100799 1917131 1918774001 1186331 1111606 1107382 1720717 55088 1100242 1186230 1917746 1918744 1767754 1916727 1110107 9090 1100779 DESCRIPTION Hex Nut, 5/16–18 ................................ Hex Flange Screw, 5/16-18 x 3/4* ...... Engine Support Bracket, left side ........ Engine Support Bracket, right side...... Hex Hd. Screw, 5/16-18 x 1-1/2.......... Decal, Stabilization.............................. Mounting Bar ...................................... Hex Flange Screw, 5/16-18 x 1 ........... Hex Hd. Screw, 5/16-18 x 2* .............. Flat Washer, 5/16 ................................ Belt Guide, Wire Formed, Fwd Belt...... Pivot Bushing...................................... Lockwasher, 5/16................................ Hex Nut, 5/16-18................................. Washer, Shoulder ............................... Idler Arm, Forward Tiller Direction ...... Screw, self tapping, #10-24 ................ Spring ................................................. Hex Locknut, 5/16-18 ......................... Idler Pulley, Forward .......................... Screw, 5/16-18 x 1-3/4 ....................... QTY. 4 4 1 1 5 1 2 4 1 1 2 2 2 2 1 1 1 1 1 1 1 31 Parts List Model 12226 DRAWING NO. 6 10 REF No. 1 2 3 5 7 PART No. 1100043 1270-2A 1733398 1982612 1270-1A DESCRIPTION QTY. Hex Hd. Screw, 3/8-16 x 1-1/4*................... 16 Bolo Tine–single, right hand tine used on left side of tiller (Incl. two of each Ref. No.'s 1 and 3)...................................................... 8 Hex Locknut, 3/8-16 .................................... 18 Hex Hd. Screw, 3/8-16 x 2, GRADE 8 .......... 2 Bolo Tine–Single, left hand tine used on right side of tiller (Incl. two of each Ref. No.'s 1 and 3)...................................................... 8 REF No. PART No. 8 1902154001 -- 1901118 10 11 12 1917487 9380 9338 DESCRIPTION QTY. Tine Holder–for bolo tines, left and right sides .................................................. Replacement set of 16 Bolo Tines– includes eight each of right hand and left hand tines, and sixteen each of Ref. No.’s 1 and 3 ....... Wheel & Tire Assembly................................ Clevis Pin–.312 x 1-3/4 long ........................ Hitch Pin ...................................................... * Specify GRADE 5 if ordering part locally. IMPORTANT: Left and right sides of tiller are determined by standing in the operator position and facing the direction of forward travel. 2 1 2 2 2 32 Parts List Model 12226 DRAWING NO. 7 MAIN SUPPORT & YOKE ASSEMBLY PART # 1904522001 (See Detail A) ROW MARKER ATTACHMENT (option) – PART # 12589 (Complete – Attaches to Furrower Attachment) BUMPER PART #12593 20 19 23 22 21 HILLER/FURROWER ATTACHMENT (option) PART #12579 (Viewed from front of tiller) Detail A Parts List 33 Model 12226 PARTS LIST - DRAWING NO. 7 REF No. PART No. DESCRIPTION QTY. Row Marker Attachment (option) – Part #12589 1 1904522001 2 3 4 1594 1904524001 1904523001 5 9347 6 9786 7 1596 8 9828 9 1100135 --- --- --- 1837 12582 12589 Main Support & Yoke Assy– complete. Incl. Ref. No.'s 10,11,12,13,14,15,16,17 & 18........... Marker Blade–blade only ................... Marker Arm–main arm ...................... Marker Arm–extension arm with stop pin ......................................... Hitch Pin–(incl. in Hardware Pkg #1837)........................................... Thumbscrew–1/4-20 x 1/2, not avail. sep. (see hardware pkg. #1837)........................................... Nut Bar–(incl. in hardware pkg #1837)........................................... Nut–hex, 10-24 w/attached start washers, not avail. sep. (see hardware pkg #1837) .................... Screw–round hd.,10-24 x 1, not avail. sep. (see hardware pkg #1837)........................................... Hardware Package–includes: one #9347 hitch pin (Ref. 5), two #9786 thumbscrews (Ref. 6), one #1596 nut bar (Ref. 7), two #9828 hex nuts (Ref. 8), two 1100135screws (Ref. 9) ......... Row Marker Attachment & Pony Hiller/Furrower Attachment – complete: incl. #12579 Pony Hiller/Furrower and #12589 Row Marker................................... Row Marker Attachment – complete: attaches to furrower attachment #12579, includes #1904522001 Main Support & Yoke Assy...................................... REF No. PART No. QTY. Row Marker Main Support & Yoke Assembly – Part #1904522001 1 1 1 1 1 10 1186349 11 12 13 14 15 16 17 18 1593 1592 1591 1590 1588 1589 9925 1186231 Screw–hex flanged locking, 3/8-16 x 1-1/2* ............................. Stop Bar ............................................ Yoke .................................................. Tube Key–square............................... Washer–friction................................. Main Support .................................... Washer–square hole.......................... Washer–disc spring .......................... Nut–hex 3/8-16 ................................. 1 1 1 1 2 1 1 1 1 2 Bumper – Part #12593 1 2 2 1 19 20 21 1918749001 1448 1111607 22 1100242 23 1186230 --- 1918781 Bumper (includes Ref. 20) ............... Decal - Caution.................................. Screw–hex hd., 5/16-18 x 2-1/4*, not avail. separately (order #1918781 hardware kit) .. Lockwasher–5/16*, not avail. separately (order #1918781 hardware kit) ............................... Nut–hex, 5/16-18*, not avail. separately (order #1918781 hardware kit) ............................... Hardware Kit: Incl. four each of Refs. 21, 22 and 23 ....................... 1 1 4 4 4 1 Hiller/Furrower Attachment (option) – Part #12579 1 1 1 2 3 4 5 6 7 8 9 10 11 12 -- 1900771001 1186098 1177548 9902 9824 1900773001 1900774001 1900772001 9725 1100243 1186231 9318 12579 Note: Common hardware listed above as “not available separately” can be found at most hardware stores. * Specify GRADE 5 if ordering part locally. DESCRIPTION Furrower–blade only ......................... Carriage Screw–5/16-18 x 3/4 .......... Star Washer–external tooth, 5/16...... Plain Washer–5/16 S.A.E. ................. Wing Nut–5/16-18 ............................ Hiller Wing–left ................................. Hiller Wing–right .............................. Bracket–blade mounting ................... Carriage Screw–blade mounting, 3/8-16 x 1-1/2 .............................. Lockwasher–3/8, plated ................... Nut–hex, 3/8-16, plated .................... Pin–clinch ........................................ Hiller/Furrower–complete attachment (owner must screw blade to mounting bracket, and wings to blade). Instructions included ......... 1 4 4 4 4 1 1 1 2 2 2 1 1