Preview only show first 10 pages with watermark. For full document please download

1238-lgtr5436_lowell Rack.indd

   EMBED


Share

Transcript

Spec No. 1238 [REV. 04.06.17] Page 1/3 Model No. LGTR-5436 • 54U x 36”D x 22”W Construction & Features •  Welded Frame: 16-gauge steel seamless side-frame construction, 14-gauge steel top and bottom, reinforced at loadbearing junctions for strength equivalent to 11gauge steel. • Open Front: Rack ships ready to accept optional surface-mount door. • Rear Door: Includes solid steel recessed rear door with key lock. (Door can be omitted by ordering Model No. LGTR-5436-LRD.) • Knockouts: Rear frame has removable knockout panels and combination knockouts for conduit wiring above and below door (1/2”, 3/4”, 1”, 1-1/2”), plus BNC knockouts for UHF/VHF antennas. • Mounting Rails: Two pairs of 11-ga. steel adjustable rails with mounting holes tapped 10-32 and rack unit increments printed on EIA spacing. Rail clearance: front rails to outside frame (flush) is 1.75 in.; front rails to inside of (optional) surface-mount door is 2.5 in. • Top Mounting Rails:  10U opening features rails with tapped 10-32 mounting holes on EIA spacing. Close with black steel panels included as shipping stiffeners or mount optional 19”W accessories. • Base: Includes grounding stud and provisions to add leg levelers (optional) or anchor bolts (not included). •  UL Listed (UL2416): Load capacity 3150 lbs. • EIA/TIA: Compliant. • Hardware: Panel mounting hardware included. • Finish: Black wrinkle powder epoxy. • Origin: Made in U.S.A. with 100% Certified U.S. steel A&E Specifications The EIA/TIA compliant, UL Listed (UL2416) 19” gangable equipment rack shall be Lowell Model No. LGTR-5436, which shall measure 22”W x 36”D x 100.62”H (33.34” useable depth x 54U useable height). The rack shall be UL Listed in the U.S. and Canada with a load capacity of 3150 lbs. Construction shall be fully welded 16-gauge steel frame with 14-gauge steel top and bottom reinforced at loadbearing junctions and finished with a black wrinkle powder epoxy coating. The rack shall include a solid steel, recessed rear door with key lock and two pairs of 11-gauge steel adjustable rails with mounting holes tapped 10-32 and rack unit increments printed on EIA spacing. The rear frame shall feature knockouts (1/2”, 3/4”, 1”, 1-1/2”) for conduit wiring plus BNC knockouts for UHF/VHF antennas.Top shall feature integral rails with mounting holes tapped 10-32 ready to accept blank panels included as shipping stiffeners or optional 19”W accessories. The base shall feature a grounding stud and provisions to add optional leg levelers. Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com Spec No. 1238 [REV. 04.06.17] Page 2/3 17.500" 18.312" CL TO CL 17.812" 36.00" TOP 1" X .875" EKO 2" X 1.75" EKO 22.00" 2" X 1.88 EKO 1" X .875 EKO .5" WIRELESS ANTENNA 2X REMOVABLE K.O. PLATE 27.813" 94.625" (54U) 100.625" 27.125" 27.813" FRONT SIDE (with cutaway) 1.56" 2.06" 18.89" REAR 31.88" GROUNDING STUD 16.51" 34.13" BASE Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com Spec No. 1238 [REV. 04.06.17] Page 3/3 Options Front Door (LFD-54): Solid, surface-mount front door with key lock mounts left or right without drilling. Side Panels (SDP-5436): Solid panels increase rack width 1.25”. Panels are split for maneuverability (i.e. There are 2 pcs. per side). Black wrinkle epoxy finish. Sold in pairs. Fully-vented Rear Door (LRND-54FV): Fully vented recessed rear door with key lock. To change from the standard rear door with top/bottom vents to fully vented, order rack model LGTR-5436-LRD (less rear door) then order the fully-vented rear door separately. Middle Depth Rails (RRNT-54): 54U rails tapped 10-32 can be adjusted to mount anywhere along side brackets (1 pr) Model No. Summary Model No. Description Overall Height in Overall Width in Overall Depth in LGTR-5436 Tall gangable rack 100.62 22.00 36.00 LGTR-5436-LRD Tall gangable rack (less rear door) 100.62 22.00 36.00 LFD-54 Solid front door SDP-5436 Solid side panels, 1 pr LRND-54FV Fully-vented rear door RRNT-54 Middle depth rails (1 pr) One rack unit (RU or U) = 1.75 inches or 44.45 mm. Usable Depth in 33.34 33.34 Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com