Transcript
Spec No. 1240
[REV. 07.19.17] Page 1/2
Model No.
LPSR-1226GT Rollout Studio Rack with laminate top 23”W x 25.52”D x 25.98”H* Construction & Features: • Welded Frame: Fully welded 18-ga. steel construction is reinforced at all loadbearing junctures. The ergonomic design offers 12U mounting space on a 15-degree slope for easy viewing of equipment from a seated position. • Top: Premium laminate top overhangs rack approximately 1 inch in rear, 0.5 in. in front, and 0.375 in. on each side. Top dimensions are 20.25 in. deep x 23.75 in. wide x 1 in. high. • Front Door: Hideaway front door with vents and key lock opens from top and slides into base for storage convenience. • Rear Access Cover: Rear cover opens from top and can be removed to access equipment. Keyed differently than front door. • Welded Sides: Sides have top/bottom vents, recessed handles. • Cutouts: Cutouts on front provide a way to mount (optional) decorator style switches for quick access without opening the door. • Rails: Fixed-position front mounting rails (tapped 10-32) are numbered on E.I.A. spacing for easy set-up. Rear mounting holes punched on E.I.A. spacing include 10-32 Tinnerman clips. • Cable Management: Two cable entry ports in rear • Swivel Casters Four casters allow pull-out access to equipment and cables. • Load Capacity: 250 lbs. [113 kg] • E.I.A./T.I.A.: Compliant • Hardware: Pilot Point screws with captive washers • Finish: Black wrinkle powder epoxy • Origin: Made in the U.S.A. with Certified U.S. steel
A&E Specifications: The E.I.A./T.I.A. compliant rack shall be Lowell Model No. LPSR-1226GT, which shall measure 25.98 in. high (without casters or laminate top) x 23 in. wide x 25.52 in. deep at the base. It shall include a laminate top with rubber edge molding (20.25 in. deep x 23.75 in. wide x 1 in. high). The rack shall be fully welded 18-gauge steel construction reinforced at all loadbearing junctures. It shall provide 12U mounting space on a 15-degree slope with each level providing a different depth for equipment. It shall have a load capacity of 250 lbs. The rack shall include integral side handles, swivel casters, hideaway front door with keyed lock, rear access cover with keyed lock and cable entry ports, two front cutouts with cover plates for external access to mounted decorator style switches (not included), onepair of fixed position front mounting rails tapped 10-32, and rear mounting holes with 10-32 Tinnerman clips. Vents for natural heat dissipation shall be provided on sides and front door. Finish shall be black wrinkle powder epoxy.
* Rack size without casters or laminate top.
Model Number: Model No.
Description
LPSR-1226GT Rollout studio rack with laminate top * Measurements are without casters or laminate top.
Racking Space
Rack Height *
12U (angled) 25.98 in / 659.89 mm ** Rack depth at base.
Rack Width *
23.00 in / 584 mm
Rack Depth **
25.52 in / 648 mm
Load Capacity
250 lbs / 113 kg
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com
Spec No. 1240
[REV. 07.19.17] Page 2/2
23.750
20.250
1.000
23.750
1.000
27.875
23.000
.892
26.900
25.983
25.520
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com
