Preview only show first 10 pages with watermark. For full document please download

13391368460943

   EMBED


Share

Transcript

Data sheet SI 14TU High-efficiency brine-to-water heat pump Max. flow temperature: 62 °C Casing colour: White (similar to RAL 9003) Brown-red design screen (RAL 3011) The high-efficiency heat pumps are equipped with a newly-developed compressor design, a COP booster and an electronic expansion valve. The newly-developed COP booster combines the functions of the economiser with the functions of the liquid separator, thus protecting the compressor from liquid refrigerant. This allows the refrigerant circuit to be operated at a lower temperature level, which means a significant increase in the efficiency. The components, each perfectly attuned to one another, make high performance factors and low operating costs possible. Advantages at a glance: - COP booster for maximum COPs during operation through minimal overheating - Maximum flow temperatures of 62 °C for high domestic hot water temperatures - Free-swinging compressor baseplate with solid-borne noise insulation for less acoustic emissions - direct connection to the heating system possible - Electronic expansion valve for high seasonal performance factors and low operating costs - Universal design for flexible installation types - installation on top of a built-under buffer tank or a domestic hot water cylinder possible Technical data Dimplex High-efficiency brine-to-water heat pump (Medium temperature) Order reference SI 14TU Casing colour Max. flow temperature Lower operating limit heat source (heating operation) / Upper operating limit heat source (heating operation) Heat output 1 compressor at B5/W35 / COP at B0/W35* Heat output with 1 compressor / COP at B0/W45 Nominal power consumption according to EN 14511 at B0/W35 Sound power level device Refrigerant / Amount of refrigerant Max. heating water flow rate / Pressure drop Heat source flow (min.) Dimensions (W x H x D)** Weight Connection voltage Starting current with soft starter Fuse protection Connection heating Heat source connection Seal of approval EHPA (valid until) White (similar to RAL 9003) 62 °C -5 to 25 °C 13,9 kW / 5 13,3 kW / 3,8 2,78 kW 47 dB (A) R410A / 4,4 kg 2,4 m³/h / 10700 Pa 3,4 m³/h 650 x 845 x 565 mm 140 kg 3/PE ~400 V, 50 Hz 23 A C 13 A 1 ¼ inch 1 ¼ inch Yes / 12.12.2014 *Heat output and coefficient of performance (COP) according to EN 14511 at B0/W35 (B0 = brine inlet temp. 0 ℃, W35 = heating water outlet temp. +35 °C) **Please note that additional space is required for pipe connections, operation and maintenance. Glen Dimplex Deutschland GmbH Dimplex Division Am Goldenen Feld 18 95326 Kulmbach Page 1/3 Subject to change and errors! E-mail: [email protected] Internet: www.dimplex.de Internet: 08.06.2012 20131024 Phone: +49 (0)9221 709-201 Fax: +49 (0)9221 709-339 System accessories SI 14TU Description Article Sample number item SI 14TU SYL 250 KOMP 32 SMF 32 364110 352260 362060 362140 1 SZB 140E AP SVT SVT 200KV SVT 300KV SVT 400KV AFN 825 SWPR 200 362090 348900 363860 363870 363880 328610 359470 1 1 PSP 100E CTHK 630 CTHK 631 CTHK 632 CTHK 633 CTHK 634 CTHK 635 PSW 100 PSW 200 PSW 500 DDV 25 UP 60 UP 80 WWM 25 UPE 60 VTB 25 MMH 25 MMB 25 VSE 32-50 VSE 32-100 VSE 32-150 VSE 32-200 VSE 32-300 353360 363610 336180 335910 322140 322150 322160 351090 339830 339210 358390 340300 340310 346600 358870 339870 348640 348880 362520 362530 362540 362550 362560 1 SRX 080M SRX 120M SRX 140M SRX 180M HDLR 450 HCT 300 359080 359090 359100 359110 337450 351210 WWSP 880 FLH 60 FLHU 70 FLH 90 FLH 25M SVK 852 337880 338060 338070 366130 349430 326660 WWSP 442E 353370 WWSP 900 339220 PWD 750 349100 PWD 900 362860 WPG 25 356030 1 UP 80 340310 1 Order ref. Item Price Heat pumps High-efficiency brine-to-water heat pump Elasticated sound insulation underlay strips DN 32 double-sphere rubber expansion joint DN 32 dirt trap Heat source accessories Brine circuit accessory package for SI 6 - 14TU Brine circuit manifold connection package Brine circuit manifold (2-fold) with clamping ring fittings Brine circuit manifold (3-fold) with clamping ring fittings Brine circuit manifold (4-fold) with clamping ring fittings Brine circuit antifreeze (20 l) Low-pressure brine switch 2 5 Hydraulic accessories Built-under buffer tank Immersion heater 4.5 kW; ~230 V Immersion heater 2.0 kW; ~230 V Immersion heater 2.9 kW; ~400 V Immersion heater 4.5 kW; ~400 V Immersion heater 6.0 kW; ~400 V Immersion heater 7.5 kW; ~400 V Free-standing buffer tank 100 l* Free-standing buffer tank 200 l* Universal buffer tank (500 l)* Dual differential pressureless manifold Circulating pump for heating water Circulating pump for heating water Domestic hot water module/unmixed heating circuit module Electronically controlled circulating pump for heating water Manifold bar Mixed heating circuit module with temperature sensor Mixer module for bivalent systems Ready-for-use DN 32 stainless steel Wellflex pipe Ready-for-use DN 32 stainless steel Wellflex pipe Ready-for-use DN 32 stainless steel Wellflex pipe Ready-for-use DN 32 stainless steel Wellflex pipe Ready-for-use DN 32 stainless steel Wellflex pipe 1 1 1 1 Heating accessories Fan convectors heating 800 W Fan convectors heating 1200 W Fan convectors heating 1400 W Fan convectors heating 1800 W Immersion heater pipe assembly* 3 kW pipe heater DHW preparation accessories Domestic hot water cylinder (400 l) with temperature sensor Flange heater for domestic hot water Flange heater for domestic hot water Flange heater for domestic hot water FLH 25M flange heater Safety valve combination Design domestic hot water cylinder with sheet metal coverings and temperature sensor* Domestic hot water cylinder (500 l) with temperature sensor* Combo tank for heating and domestic hot water preparation with central flow* Combo tank for heating and domestic hot water preparation with central flow* Pump unit DN 25 for direct connection of the domestic hot water cylinder Circulating pump for heating water Glen Dimplex Deutschland GmbH Dimplex Division Am Goldenen Feld 18 95326 Kulmbach Page 2/3 Subject to change and errors! E-mail: [email protected] Internet: www.dimplex.de 1 1 Internet: 08.06.2012 20131024 Phone: +49 (0)9221 709-201 Fax: +49 (0)9221 709-339 System accessories SI 14TU Description Order ref. Article Sample number item Item Price Control accessories Extension for an Ethernet network connection Extension for a KNX/EIB bus connection Extension for a Modbus connection MS PGD wall mounting kit Remote control for WPM 2006/2007/EconPlus/R* External temperature sensor with casing Temperature sensor NTC-10 with metal sleeve Thermostat for heating and domestic hot water NWPM EWPM LWPM 410 MS PGD AP PGD FG 3115 NTC-10M KRRV 003 356960 356970 339410 353810 356570 336620 363600 322070 PKS 14 Econ DWU 25 DWU 40 ZWU 25 ZWU 32 362930 347760 347770 348940 348950 WPM Econ PK RKS WPM RTK 601U RTK 602U TPW WPM 360000 342220 355610 355620 350970 Accessories for passive cooling Passive cooling station with cooling module* Three-way distribution valve Three-way distribution valve Two-way isolation valve Two-way isolation valve Control accessories (cooling) Passive cooling controller* Room climate station for temperature and humidity measurement Room temperature controller heating/cooling* Room temperature controller heating/cooling Dew point monitor* * Other specific accessories available / required Important information: The combination of the components and the quantities indicated represent a non-binding sample system, which needs to be tested and individually adapted as required. Pump dimensioning must be reviewed according to the pressure loss of the system and the minimum heating water flow rate of the heat pump. Glen Dimplex Deutschland GmbH Dimplex Division Am Goldenen Feld 18 95326 Kulmbach Page 3/3 Subject to change and errors! E-mail: [email protected] Internet: www.dimplex.de Internet: 08.06.2012 20131024 Phone: +49 (0)9221 709-201 Fax: +49 (0)9221 709-339