Preview only show first 10 pages with watermark. For full document please download

13.5 V, 10.0 Amps Power Supply Cum Battery Charger Operating On

   EMBED

Share

Transcript

Switching Power Supplies for wireless Application - BM100 13.5 V, 10.0 Amps Power Supply cum Battery Charger Operating on 220 V AC, Suitable for VHF Wireless applications ENVIRONMENTAL Operating Temperature 0 - 50°C Non-operating Temperature 0 - 75°C Humidity 5% to 95% Non-condensing SAFETY & EMI Safety Designed to meet IEC - 1950. EMI FCC Class - B / CISPR22 PROTECTIONS Output Over Voltage PSU Trips on over voltage condition. Output Over Load end Output folds back on over load Short Circuit Goes to hick-up mode on Short Circuit Battery Rev. Polarity PSU protected throuh internal fuse INDICATIONS Mains On When AC is available Battery ON When Battery is supplying power to the Radio Battery Low When Battery voltage is less than 11.4V OUTPUT SPECIFICATIONS AC Input Voltage range 170 - 270 V AC AC Input 3 Pin 5.0 A Power cord DC Output Voltage 13.5 V DC DC Output Current - Equipment 10.0 Amps DC Output Current - Battery* 5.0 Amps Output Ripple ( P-P max )** <1% Output Voltage regulation ±3% Batt. deep discharge cut-off facility Optional Dimensions (W X H X D) 190 X 75 X 160 (In mm) Weight (in Kg.) 1.9 ● Battery current when Radio is not in Transmit mode ● While measuring the Ripple & Noise, 10 µF Elec. Cap and 104 CD Cap to be connected across the output.