Transcript
ETegro Fastor JS200 G3 JBOD
ETegro Fastor JS200 G3 JBOD
Table of Contents 1. Etegro Fastor JS200 G3 JBOD rail kit installation guide ....................................................... 1 1.1. Conventions ........................................................................................................... 2 1.2. Safety Information .................................................................................................. 3 1.2.1. Important Safety Instructions ........................................................................ 3 1.3. Disclaimer .............................................................................................................. 4 2. About this guide ................................................................................................................ 5 3. Required tools ................................................................................................................... 6 4. Package content ............................................................................................................... 7 5. Attaching rail kit to a cabinet ............................................................................................. 8 5.1. Rack with square holes .......................................................................................... 9 5.2. Rack with round holes .......................................................................................... 13
iii
Chapter 1. Etegro Fastor JS200 G3 JBOD rail kit installation guide
1
Etegro Fastor JS200 G3 JBOD rail kit installation guide
1.1. Conventions Several different typographic conventions are used throughout this manual. Refer to the following examples for common usage. Bold type face denotes menu items, buttons and application names. Italic type face denotes references to other sections, and the names of the folders, menus, programs, and files. type face denotes keyboard keys. Warning information appears before the text it references and should not be ignored as the content may prevent damage to the device.
CAUTIONS APPEAR BEFORE THE TEXT IT REFERENCES, SIMILAR TO NOTES AND WARNINGS. CAUTIONS, HOWEVER, APPEAR IN CAPITAL LETTERS AND CONTAIN VITAL HEALTH AND SAFETY INFORMATION. Indicates information that is important to know for the proper completion of a procedure, choice of an option, or completing a task.
Highlights general or useful information and tips.
2
Etegro Fastor JS200 G3 JBOD rail kit installation guide
1.2. Safety Information 1.2.1. Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. Warnings Heed safety instructions: Before working with the server, whether using this manual or any other resource as a reference, pay close attention to the safety instructions. Adhere to the assembly instructions in this manual to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this manual. Use of other products / components will void the UL listing and other regulatory approvals of the product and will most likely result in non-compliance with product regulations in the region(s) in which the product is sold. System power on/off: The power button DOES NOT turn off the system AC power. To remove power from system, you must unplug the AC power cord from the wall outlet. Make sure the AC power cord is unplugged before opening the chassis, adding, or removing any components. Hazardous conditions, devices and cables: Hazardous electrical conditions may be present on power, telephone, and communication cables. Turn off the server and disconnect the power cord, telecommunications systems, networks, and modems attached to the server before opening it. Otherwise, personal injury or equipment damage can result. Electrostatic discharge (ESD) and ESD protection: ESD can damage drives, boards, and other parts. We recommend that you perform all procedures in this chapter only at an ESD workstation. If one is not available, provide some ESD protection by wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on the server when handling parts. ESD and handling boards: Always handle boards carefully. They can be extremely sensitive to electrostatic discharge (ESD). Hold boards only by their edges. After removing a board from its protective wrapper or from the server, place the board component side up on a grounded, static free surface. Use a conductive foam pad if available but not the board wrapper. Do not slide board over any surface.
3
Etegro Fastor JS200 G3 JBOD rail kit installation guide
1.3. Disclaimer The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, the manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes. For the latest information and updates please refer to www.etegro.com All the illustrations in this technical guide are for reference only and are subject to change without prior notice.
4
Chapter 2. About this guide This document provides a quick overview of how to install rack kit into standard server cabinet. This manual is written for system technicians who are responsible for troubleshooting, upgrading, and repairing the JBOD chassis. This document provides an overview of the rail kit installation to cabinets with square and round mounting holes. For the latest version of this manual, see www.etegro.com.
5
Chapter 3. Required tools • Philips screwdriver
6
Chapter 4. Package content The JS200 G3 rail kit box contains the following items: • Left side assy (1) • Right side assy (1) • Square hole guiding screws (8) • Rack fix screws (8)
7
Chapter 5. Attaching rail kit to a cabinet Each tray requires two standard mounting rack units (2U) of vertical space and occupies 6 mounting holes. Rails can be adjusted from 700mm to 1100 mm.
8
Attaching rail kit to a cabinet
5.1. Rack with square holes all following figures are made for left part of cabinet (from front point of view).
Procedure for right part of cabinet is the same.
Front left part of rail kit is labeled "L FRONT", front right part of rail kit is labeled "R FRONT".
1. Position the front flange of the left rail behind the left front cabinet stand and align the bottom of rail with required unit mark of the cabinet.
9
Attaching rail kit to a cabinet
Figure 5.1. Positioning the front of left rail
2. Insert guiding screws through the top and bottom holes (position 1 and 6) on the front of the rail.
10
Attaching rail kit to a cabinet
Figure 5.2. Securing the guiding screws
3. Insert fix screws through the top and bottom holes (position 2 and 4) on the front of the rail.
11
Attaching rail kit to a cabinet
Figure 5.3. Securing the fix screws
4. Adjust the length of the rail to fit the cabinet and secure it with screws, same as front part.
12
Attaching rail kit to a cabinet
5.2. Rack with round holes all following figures are made for left part of cabinet (from front point of view).
Procedure for right part of cabinet is the same.
Front left part of rail kit is labeled "L FRONT", front right part of rail kit is labeled "R FRONT".
1. Position the front flange of the left rail behind the left front cabinet stand and align the bottom of rail with required unit mark of the cabinet.
13
Attaching rail kit to a cabinet
Figure 5.4. Positioning the front of left rail
2. Insert fix screws through the top and bottom holes (position 1 and 6) on the front of the rail.
14
Attaching rail kit to a cabinet
Figure 5.5. Securing the fex screws
3. Adjust the length of the rail to fit the cabinet and secure it with screws, same as front part. 4. Follow the same procedure with right part of the rail kit.
15
