Transcript
Note:
1. Software Installation for Windows 7 The installation procedures are similar to each other in different Windows versions Step 1: Insert the Wireless PCI express adapter into the PCI Express slot of the motherboard. The system will automatically find the device and search for its driver. You may see the follow screens if you use Windows Vista or Windows XP. For Windows Vista, Please click Cancel.
For any further information on ADDON product, please visit our website: http://www.addon-tech.com
1
For Windows XP, Please click Cancel, if you see this box during installation process.
Network Adapter
Step 2: Insert Wireless PCI express adapter Installation CD into CD-ROM drive, open the CD-ROM and double click Windows->NWP300Ev3.exe to install PCI express adapter.
For any further information on ADDON product, please visit our website: http://www.addon-tech.com
2
Step 3: Select “I accept the terms of the license agreement” and click Next> to continue.
Step 4: Select “Install driver and Ralink WLAN Utility” and click Next> to continue.
For any further information on ADDON product, please visit our website: http://www.addon-tech.com
3
Step 5: Click Install> to continue.
Step 6: Please wait for a while for installing process.
For any further information on ADDON product, please visit our website: http://www.addon-tech.com
4
Step 7: Click Finish> to finish installation.
2. Configuring Wireless Network Step 1: Double click on Wireless Utility in the system tray or in the Start->All Programs to launch the utility.
For any further information on ADDON product, please visit our website: http://www.addon-tech.com
5
Step 2: You will see the following screen. Click on the button “Available Networks the network you want to connect in the list of Available Networks and click Next button
Step 3: Enter the network key if it is necessary and click Next button
”, double click .
to finish.
For any further information on ADDON product, please visit our website: http://www.addon-tech.com
6
Step 4: To check the connection, you will see the IP address and Mask of your computer, point your mouse to the utility icon in the system tray and it will show Status: “Good”.
3. To connect to your network automatically, you need to add your network to the Profile Step 1: Click on Profile Settings button
and Add
.
For any further information on ADDON product, please visit our website: http://www.addon-tech.com
7
Step 2: Create a profile name and select SSID of your network from dropdown list, then click Next button
.
Step 3: Check your router wireless security settings and select the same security type from following screen. Then click Next button
.
For any further information on ADDON product, please visit our website: http://www.addon-tech.com
8
Step 4: Enter your Network Key and click Next button
Step 5: Click on Next button
.
.
For any further information on ADDON product, please visit our website: http://www.addon-tech.com
9
Step 6: Click on Connect button
to connect to your network.
Please note: According to IEEE industrial standard, the connection speed will be up to 54Mbps using WEP and TKIP encryption in 11n mode. To maximize your connection speed in 11n mode, we recommend the customers to use WPA-PSK/WPA2-PSK with AES encryption for your wireless connection.
For any further information on ADDON product, please visit our website: http://www.addon-tech.com
10
