Preview only show first 10 pages with watermark. For full document please download

1.39 Ghz, 6 Dbi, Internal Bandpass Filter, Stc Flange

   EMBED


Share

Transcript

Part # 1087-068 Omni Antenna, 4 Section Collinear, 1.35 - 1.39 GHz, 6 dBi, STC Flange Overview Southwest Antennas Part # 1085-135 is a 4 section collinear omni antenna with a frequency range of 1.35 to 1.39 GHz and 6 dBi of peak gain. This antenna features an integrated 3.5" STC flange mount with lock-wired screw connection to the RP-TNC(f) RF connector, making this antenna suitable for use with compatible aircraft and helicopter antenna mounts. A matte black radome and black-chrome RP-TNC(m) RF connector offer a low visibility finish that will not attract attention when deployed. The waterproof sealed spring base allows the antenna to bend or flex with impact and return to its vertical operating position, reducing risk of damage to the antenna or mated radio RF connector. Features: Broad Band Coverage 4 Section Collinear 1.35 - 1.39 GHz 50W Power Handling 6 dBi Omni Radiation Pattern Rugged Construction Low Glare Black Radome End Cap Lettering "L" STC Flange Base Black Chrome RP-TNC(m) RF Connector Doc: 217-0001-758 Created: 07/31/2017 8145 Ronson Rd. Ste B • San Diego, CA 92111 PH: (858) 277-3300 • Fax: (858) 571-6911 • Email: [email protected] southwestantennas.com Page 1 Part # 1087-068 Omni Antenna, 4 Section Collinear, 1.35 - 1.39 GHz, 6 dBi, STC Flange Antenna Specifications Parameter Value Frequency Band L Impedance 50 Ohms Minimum Frequency 1.35 / 1,350 GHz / MHz Maximum Frequency 1.39 / 1,390 GHz / MHz Frequency Bandwidth 0.04 / 40 GHz / MHz Maximum VSWR 2:1 Ratio Gain 6 dBi Polarization Vertical Maximum RF Input Power 50 Watts Horizontal (AZ) Beamwidth 360 Degrees Vertical (EL) Beamwidth 25 Degrees Color Black Spring or Gooseneck Spring Mount Style STC Flange Mounting Holes 4x 0.250 Diameter Mount Diameter 3.500 / 88.900 inches / mm Maximum Wind Velocity 100 / 161 mph / kph RF Connector Type RP-TNC(m) RF Connector Finish Black Chrome Product Height 17.630 / 447.802 inches / mm ±0.13" Product Diameter 0.812 / 20.625 inches / mm +0.02" / -.000" Doc: 217-0001-758 Created: 07/31/2017 Units Tolerance 8145 Ronson Rd. Ste B • San Diego, CA 92111 PH: (858) 277-3300 • Fax: (858) 571-6911 • Email: [email protected] southwestantennas.com Page 2 Part # 1087-068 Omni Antenna, 4 Section Collinear, 1.35 - 1.39 GHz, 6 dBi, STC Flange Parameter Value Units Product Weight 6.10 / 172.93 oz / grams Doc: 217-0001-758 Created: 07/31/2017 Tolerance 8145 Ronson Rd. Ste B • San Diego, CA 92111 PH: (858) 277-3300 • Fax: (858) 571-6911 • Email: [email protected] southwestantennas.com Page 3 Part # 1087-068 Omni Antenna, 4 Section Collinear, 1.35 - 1.39 GHz, 6 dBi, STC Flange Elevation Pattern Referenced to +10 dBi Doc: 217-0001-758 Created: 07/31/2017 8145 Ronson Rd. Ste B • San Diego, CA 92111 PH: (858) 277-3300 • Fax: (858) 571-6911 • Email: [email protected] southwestantennas.com Page 4 Part # 1087-068 Omni Antenna, 4 Section Collinear, 1.35 - 1.39 GHz, 6 dBi, STC Flange Engineering Drawing All dimensions are in inches Doc: 217-0001-758 Created: 07/31/2017 8145 Ronson Rd. Ste B • San Diego, CA 92111 PH: (858) 277-3300 • Fax: (858) 571-6911 • Email: [email protected] southwestantennas.com Page 5