Transcript
Communication Technology Experiment Kits
MODULATION / DEMODULATION ES401-ES402
Modulation Test Set provides the opportunity to work with Demodulation Kit. Supply circuit and outputs are equipped with short circuit. All necessary signals for modulation and demodulation is located on the device there is no need for an external signal source. Synchronized signals can be monitored with an oscilloscope. 2mm jack in various lengths from 2 mm hole on the required input and output connections and other connections are made with the help of panel cables. Cable connection on the Test Set and cable plugs are gold-plated. Basic (Analog + Digital) Communications Test Set and Bag has two different structures, including Type panel. Test Set is designed in accordance with the table top operation. Is supplied in a durable aluminum case against impacts.
OPTIONS: can be mounted on a vertical module frame
Specifications Operating Voltage: Power Supply:
230 V AC 50 Hz. , Optional 115V AC 50Hz +/-15V 1A, +5V 1A, Adjustable : +/- 2,5V DC +/-1,5V DC Adjustable : 0 V.2,5V
DC +/-15V,5V:
LED indicator
Frequency Generator:
200 kHz, 2kHz, 1kHz, 500 Hz, 250Hz
Other Specs:
Trigger frequency synchronization
Size:
Bag Typ: 440x340x160mm (Each bag) Frame typ: 1080mmx 550mm (Mod/Demod together)
Connections:
On/off switch:
2mm Gold connections sockets and 2mm gold connections cable and 5mm short cut plugs 1 set 220V 16A , illuminated
Experiments
English an Turkish
Manual:
EXPERIMENTS: Modülation Board Analog/Digital: AM, SSB, FM, PM, PAM, PCM, PFM, PPM, DM, ASK, FSK, PSK -
Demodulation Board Analog/Dijgtal: AM, SSB, FM, PM, PAM, PCM, PFM, PPM, DM, ASK, FSK, PSK
Communication Technology Experiment with communication modules
COMMINICATION TECHNOLOGY EXPERIMENT MODULE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
AM Modulation / AM Demodulation FM Modulation / FM Demodulation ASK Modulation / ASK Demodulation PSK Modulation / PSK Demodulation PWM Modulation / PWM Demodulation FSK Modulation / FSK Demodulation PCM Modulation / PCM Demodulation QPSK Modulation / QPSK Demodulation DSB-SSB Modulation /Demodulation Study of composite LOW PASS & HIGH PASS FILTER S tudy of PLL Technology CVSD&Manchester Encoder-Decoder Study of Oscillators Wireless Technologly Filters TDM Multiplexer / Demultiplexer FDM Multiplexer / Demultiplexer Frequency converter Fiber Optic Transmitter Modul Fiber Optic Reciever Modul
Order No: ES400-1501 Order No: ES400-1502 Order No: ES400-1558 Order No: ES400-1507 Order No: ES400-1504 Order No: ES400-1506 Order No: ES400-1509 Order No: ES400-1560 Order No: ES400-1651 Order No: ES400-1717 Order No: ES400-1760 Order No: ES400-1800 Order No: ES400-1901 Order No: ES400-1720 Order No: ES400-1730 Order No: ES400-1740 Order No: ES400-1750 Order No: ES400-1300 Order No: ES400-1301
General Features of our Experiment Module; Available on the main Tester D-SUB connector attaching carried out the experiments, the modules can be used in making feed through. Modules When this selection is made from the need to feed a DC power supply externally. For this purpose; DC 1A. Adjustable 0 ... ± 12V, constant + 12V, -12V, -5V, + 5V will be needed • 2 mm gold-plated spring special cables, • Gold-plated ports, • Drawings, circuit diagrams and circuit elements on the module, • Experiments with regard to the English or Turkish Experiment Book
The main units can be used with training modules -
Order No: ES05GK10 Order No: ES05GK14 Order No: ES05BDDS16
This COKESEN main units suitable for use with all products Cokesen modules. ES05GK10
ES05GK10
ES05GK14
ES05GK14
ES05BDDS1
ES05BDDS16
ES05GK10 Main Unit
Set of experiments, for making experiments on the module and the module fitted AC / DC Power Supply Voltages that, Signal Generator and digital voltmeter is having a bag-type device. Formed from material that will withstand years of use of the structure is designed to break or rust can not be ABS and aluminum material. When the tabletop use, and use the appropriate structure for storage. Cover and detachable from the Test Set is locked. Between the device and the module D-SUB plug-type connection is made with flat cable reaches the voltage required for Experiment Module Module only and thus prevented the supply voltage error has been created a suitable work surface Optional: ES05GK10 Test Set to the desired pattern in Design and Production Specifications jumps.
Technical Specifications: 1. Current technology is suitable for training: Analog Technology, Digital Technology, Electronics, Communication Technology, PID Control, Sensors, Industrial Electronics 2. Signal Generator: Signal Band: 0-200khz. Sine, Triangle, Square, Ramp +/- 4V DC offset the up / down LED induced, frequency selection is featured with 6 stages Switchgear, fine tune frequency, Sweep in featured, Outputs: 50 Ohms - 600 Ohms - AC, Possibility to select the output power attenuator Switchgear: 0 - 20dB - 40dB - 60dB Amplitude Setting: 0-10Vpp, 3. DC Voltage 0 .. + 12V, 0 ..- 12V, LED Display all output connections suitable 2mm Hard Symmetrical Short Circuit Protection 1A: + 12V, -12, + 5V, -5V LED Display all output according to 2mm connection AC Voltages : 12 - 0 - 12 V AC 1A. 4. DC Voltmeter 2 pcs 0—99V Dijital Gösterge: 2 adet Dijital Voltmetre 5. Unit bag type. Suitable for use on the table, Socket on the panel is 2mm gold plated 6. Connection Cable Gold Plated 2mm spring plug: 1 set (included in the kit) Çalışma durumu göstergesi LED ışıklı TTL Sinyal çıkış: Switch seçmeli 5Vpp Mains connection 220V AC. / 50 Hz., The panel above the fuse: 1 piece, grounding-type voltage connection. Illuminated On / Off power switch 7. D-SUB Connections for module 8. The dimensions of the device Width: 330mm, Height: 440mm, Width: 160mm Weight: 5 kg. (approximate dimensions)
ES05GK14 Main Unit Trainer, Analog and Digital experiments designed to make appropriate and is suitable for tabletop use. In the test set, which enables the connection and use of Experiment Module 25 pin D-SUB connector or equivalent facility. Experiment Module connection between the main device only when the module reaches the voltage required to be used in the assay. The Test Set impact resistant, suitable bag type storage when not in use. The top cover can be divided and lockable .
Technical Specifications: 1. Current technology is suitable for training: Analog Technology, Digital Technology, Electronics, Communication Technology, PID Control, Sensors, Industrial Electronics 2. Signal Generator: Signal Band: 0-200khz. Sine, Triangle, Square, Ramp +/- 4V DC offset the up / down LED induced, frequency selection is featured with 6 stages Switchgear, fine tune frequency, Sweep in featured, Outputs: 50 Ohms - 600 Ohms - AC, Possibility to select the output power attenuator Switchgear: 0 - 20dB - 40dB - 60dB Amplitude Setting: 0-10Vpp, 3. TTL signal output: 1Hz, 50Hz, 1MHz 4. Logic probe with indicators: LOW – HIGH- PULSE 5. Selection switch for CMOS and TTL 6. TTL Source : Set-Clock-Reset function 7. Power supply (1) DC Voltage 0 .. + 12V, 0 ..- 12V, LED Display all output connections suitable 2mm Hard Symmetrical Short Circuit Protection 1A: + 12V, -12, + 5V, -5V LED Display all output according to 2mm connection AC Voltages : 12 - 0 - 12 V AC 1A. 8. Power supply (2) DC Voltage (2) 0...30V 2A. With digital voltmeter and ampermeter. 9. Unit bag type. Suitable for use on the table, Socket on the panel is 2mm gold plated 10. Connection Cable Gold Plated 2mm spring plug: 1 set (included in the kit) 11. D-SUB Connections for module 12. 2 x 12V lamps, 5V Relay , Bounce free Switch , 2-position toggle switch All outputs 2mm socket, Speaker 8 ohm, Button, 13. Potentiometers : 1K, 10K, 1M. 14. 8 bit indicator, 8 x slide switch. With LED indicators. 15. 2 x seven segment display with 74LS47 driver outpust: A-B-C-D 16. The dimensions of the device Width: 330mm, Height: 440mm, Width: 160mm Weight: 5 kg. (approximate dimensions) 17. Mains connection 220V AC. / 50 Hz., The panel above the fuse: 1 piece, grounding-type voltage connection. Illuminated On / Off power switch
ES05BDDS16 (Computer aided trainer main unit )
ES05BDDS16 Trainer for Analog and Digital Technology
Trainer, Analog and Digital experiments designed to make appropriate and is suitable for tabletop use. In the test set, which enables the connection and use of Experiment Module 25 pin DSUB connector or equivalent facility. Experiment Module connection between the main device only when the module reaches the voltage required to be used in the assay. The Test Set impact resistant, suitable bag type storage when not in use. The top cover can be divided and lockable
You need to use desktop or laptop computer
Trainer consist of: 2 CH 60MHz dijital oscilloscope Two channels plus an external trigger input. 60 MHz bandwidth with sensitivity from 10mV/division up to 10V/div. 150 MS/s sample rate and 512K sample memory (not at the same time). Wide range of measurements including Vpp, overshoot, rise/fall times, period, frequency, pulse width, spectrum analyser. Main unit included 2 x oscilloscope measuring prob 1:10
Function Generator 1Hz to 100KHz. Sine, Triangle, Square, x 0,1 , x10 , 1K, 10K with maus selectable. Frequence value and signal amplitude value 0-10Vpp is changed on the screen with the mouse DC Off / Set of +/- 4V as adjusted by the potentiometer on the main unit. Setting the upper and lower with 2 LEDs. Inputs 2mm socket on board
Power supply DC Power supply: +/- 12V 1 A. Variable , short-circuit protected, Fixed Voltage : +/-12V , +/-5V shortCircuit protected. All outputs 2mm socket, and LED indicator. AC Voltage : 12V – 0 – 12V common output with fuse and LED control indicator.
Other technical equipment features Computer aidet 8 relays. Outputs on board 2mm connection On screen 2 x DC Votmeter , 2 x Ampermeter, 1 x Frequancy counter, 16 bit Outputs indicators on screen and on board 16 bit Inputs indicators on screen and on board On the main unit: TTL source SET-CLOCK-RESET outputs Hight/Low/Pulse TTL source 1Hz – 50Hz – 1MHz Logic Prob : CMOS/TTL/PULSE selectable Digital Voltmeter inputs 2mm socket 3 x 12V lamps inputs 2mm socket
LED indicator
Included items: 1) 2) 3) 4) 5) 6)
ES05BDDS15 Main unit ( Bag typ) 2 x Oscilloscope measuring prob 1 set of 2mm concection cable in 4 colour. Flexibel cable with 2x d-sub connection 220V Power cable. Software
ÇOKESEN ELEKTRONİK SAN. TİC LTD STİ Baglarbasi Mah. Sehit Mucahit Sk No: 75 MALTEPE – 34844 ISTANBUL - TURKEY Tel: +90 (0) 216 3717319
Fax: +90 (0) 216 3718517
e-mail:
[email protected] Web: www.cokesen.com
case can be observed
