Transcript
T E C H N I C A L S P E C I F I C AT I O N S Pump Max. operating pressure:
275 bar
Temperature range:
-20°C to +70°C
Reservoir capacity:
3 l*
Power supply voltage:
12 or 24 Vdc**
Power comsumption electrical motor:
24 W
OPTIMUM LUBRICATION FOR THE BEST PROTECTION
stand-by
10 m A
Min. level sensor:
standard
TriPlus automatic greasing system
Power consumption
Kits, accessories and service components
Number of grease outlets:
1-2-3 **
Material:
strengthened plastic
Insulation class:
IP 67 for bottom housing
Grease:
NLGI 2 ***
TriPlus has been specially developed for vehicles with complex bodywork
*
Other options are available on special request
**
Specify with order
***
Dependent on ambient temperature; consult your
structures having differing lubrication requirements, working indepently
grease supplier
of one another. TriPlus
Pre-assembled kit with sub-kits: supplied with extensive installation and assembly instructions.
• Designed for multi-
• Standard equiped with
purpose and
electronic memory database
biodegradable NLGI2
• Standard in cab control light
grease types
• Intergrated pressure relieve
• Available with 3, 4 or 8
valve with monitoring
litres reservoir
• Modular system
• Fully sealed construction prevents grease Filler pump for refilling grease reservoir. GreenLube EP2 greases are available in various packaging sizes and types, for different applications and temperatures.
contamination
Quick-fit couplings for various applications and temperatures. Additional filter for extreme operating conditions.
• 3 independently controllable
• Standard follower plate in grease reservoir to ensure: - Grease does not suffer ageing - Visibility of grease level
irrespective of temperature or grease viscosity • Wide range of metering units
• Accurate and temperature independent function between -20°C to 70°C
• Easy and fast to install • Optional diagnostic system
• Minimal risk of oil/soap separation
• Memory database
Case with parts for carrying out service inspections.
F172742 H05
grease outputs • Constant metering,
- No condensation mixes with grease - The full amount of grease is used
Groeneveld U.K. Ltd. • The Greentec Centre, Gelders Hall Road • Shepshed, Loughborough, Leicestershire, LE12 9NH • United Kingdom Tel. +44 1509 60 00 33 • Fax +44 1509 60 20 00 • Internet: www.groeneveld-groep.com • E-mail:
[email protected]
• Easy to extend
YOUR EFFICIENCY IS OUR CHALLENGE
Operation The TriPlus lubrication system consists of: • an electrically powered plunger pump with an integrated control unit • progressive distribution blocks • grease pipes to blocks and lubrication points The Triplus system consists of a pump with between 1 and 3 outlets, to which progressive distribution blocks are linked. Each outlet is individually managed by the control unit. The interval time and the quantity of
Greases the truck
grease to be supplied in each cycle can be separately
Greases the slewing ring
determined for each outlet. The grease delivered to the progressive blocks is then distributed across
Greases the superstructure
the lubrication points in a manner determined by the block composition. The electronic control unit determines the lubrication timing for each outlet, and monitors the entire process.
The Triplus pump The electrical pump consists of: • a plunger pump • a grease reservoir with follower plate and minimum level switch
5
• a filler coupling with grease filter • up to 3 independently operated grease outlets • integrated control unit • overpressure valve with electrical switch The plunger pump, located beneath the grease reservoir, is activated by
Greases the loader frame and drive line
6
the control unit and makes the required number of rotations until the pre-
Greases the backhoe equipment
set quantity of grease is delivered, via each outlet. The pump is equipped with a sensor which records the number of rotations of the pump.
Grease reservoir with follower plate
4
TriPlus automatic greasing system
3
Every version contains a follower plate, located above the grease level in the reservoir. The follower plate follows the level of the grease; as the level drops, the follower plate also lowers.
1 The advantages of the follower plate in brief: • prevents grease oxidation, since no water condensation or air can reach the grease • no funnelling effect, as the grease level drops: all grease is uses • clean reservoir walls permitting the grease level to be checked, at a glance A level switch is also fitted in the TriPlus pump. This issues an alarm if the grease level falls below a pre-set minimum. The grease reservoir is generally topped up manually - via a filler coupling with grease filter using a manual or pneumatic filler pump.
2
1
Control unit with memory bank
2
Pump element with piston forced in and out.
3
Filter
4
Minimum level switch
5
Follower (spring loaded)
6
Stirring device
TriP lus
