Transcript
iPad Mini Tabletop System - #1542 & iPad Mini Tabletop Base (only)- #1542X
USER’S GUIDE
For Technical Support: Call our Technical Service Department Monday through Friday, 9 a.m. to 5 p.m. (EST) 1-800-TEC-TOYS or 1-800-832-8697
[email protected]
50 Broadway Hawthorne, NY 10532 Tel. 914.747.3070 / Fax 914.747.3480 Toll Free 800.832.8697 www.enablingdevices.com
Access made easy! Our state-of-the-art iPad Mini Systems are available in two versions: Tabletop and Mounting. The Tabletop version comes with a mounting platform and a removable tabletop base. The Mounting version comes with a mounting platform, a light duty mounting arm, and a clamp. The mounting platform is designed for easy access to all of the iPad Mini’s electronic ports. Two flexible cords (6½" apart) hold the iPad Mini securely. Removable tabletop base is also available separately. See the iPad Mounting System for details about the mounting arm and clamp. Platform size: 6¼"W x 8¾"L x 3½"H; Arm size: expands from 14½"L to 24"L.Weight: 3 lbs.
2. Now you can place your iPad Mini into the platform. Slip one side of your iPad Mini under the bungee cord holder, making sure you have all your ports lined up with the holder. Adjust and secure with the second bungee cord holder (See Fig. 2). This mount will hold an iPad Mini with or without a case. (We recommend our case Item No.1580). The front two feet of the tabletop base are designed to be clamped if needed
1. The table top base is held in place with a thumb screw. To install or remove the base, tighten or loosen the thumb screw (See Fig.1). Please Note: If you would like to rotate your iPad Mini from say a horizontal to vertical position just loosen the thumb screw to make your adjustment. To lock the position, tighten the thumb screw.
Fig. 2
Video: For more detailed setup information please view our setup video at: www.enablingdevices.com and type in the Item no. 1542 in our search box and then click on the results to take you to the video.
Tighten Set Knob
Caution: Do not over tighten the thumb screw, or try to move or adjust the mounting system after you have tightened the thumb screw. Doing so can damage the iPad Mini Tabletop System and void your warranty. Care of Unit: The Mini Tabletop System can be wiped clean with any mild household multi-purpose cleaner and disinfectant. Do not use abrasive cleaners, as they will scratch the surface of the unit. Rev 7/15/13
Fig.1
