Preview only show first 10 pages with watermark. For full document please download

1584-81 Rf Combiner

   EMBED


Share

Transcript

DATA SHEET CROSS TECHNOLOGIES, INC. 01/31/13 - REV.B 1584-81 RF Combiner The Model 1584-81 is one eight-way, 0.95 - 2.05 GHz, 0 dB gain combiner in a 1RU rack mount chassis with redundant 100-240 ±10% VAC power supplies. The combiner provides excellent RF characteristics. It has eight inputs and one output on the back panel. Two individual 100-240 ±10% VAC input power supplies provide diode ORʼd redundant power to the unit. A surge suppressor on the combiner output protects against high voltage transients. On the front panel, two green LEDʼs indicate the presence of DC voltage from each of the two power supplies. MODEL 1584 COMBINER LNB VOLTAGE GND +DC A ON CROSS TECHNOLOGIES INC. B POWER 1584-81 FRONT PANEL (SHOWN WITH OPTION -I ) AC A AC B FUSE F1 GND REF OUT J17 IN J16 IN J15 IN J14 IN J13 IN J18 IN J12 IN J11 IN J10 IN J9 IN J19 IN J8 IN J7 IN J6 IN J5 IN J20 IN J4 IN J3 IN J2 IN J1 1584-81 REAR PANEL(SHOWN WITH OPTION -I (F1) AND -E (J18) ) EQUIPMENT SPECIFICATIONS* Input Characteristics Input Impedance Return Loss Input Level Output Characteristics Impedance Return Loss Output Level, max. Output Level, 1dB In-Band Characteristics Gain Frequency Response Port to Port Isolation Indicators Power LNB DC Voltage Other Surge Suppressor RF connectors AC Power Mechanical Options -B -C -D -E -Ixxx W9 75Ω, type F standard (see other options below) 12 dB min, 14 dB typ. -15 dBm total maximum, each input 75Ω, type F standard (see other options below) 12 dB min, 14 dB typ -5 dBm combined output, min. +5 dBm combined output, min. ** 1 - 2 GHz IN 10M INS** IN 1 IN 2 DC INS* EXT 10 MHz IN 8 WAY COMBINER SURGE SUPPRESSOR AMP 1-2 GHz OUT * * Option -Ixxx IN 8 FUSE ** Option -E 1584-81 BLOCK DIAGRAM 0 dB ± 1.0 dB ± 1.0 dB,.95 - 2.05 GHz; ± 0.5 dB, any 20 MHz incr. > 18 dB, 20 dB typ Green LED indicates DC voltage prior to diode ORʼd and to amplifiers Option -Ixxx only - Green LED indicates DC insertion on J17 OUTPUT; Front Panel Test Points for measuring the voltage with a VOM SiDACTOR Type F (female) (see other options below) Redundant switching power supplies, 100-240 ± 10% VAC, 47 - 63 Hz, 15 watts max. (option -I222, 65w) 19 inch standard chassis 1.75” high X 12” deep 75Ω, BNC RF connectors RF Out BNC 50Ω, RF In Type F, 75Ω 50Ω, BNC RF connectors External 10 MHz insertion (J18 IN to J17 Insertion OUT); 1dB max insertion loss; 75/ 50 Ω ) DC insertion on J17 OUT; -xxx number defines voltage and current. I222 = 22 VDC at 2 amps 10 MHz and DC Power (up to 28 VDC, 2.5 amps) Pass Through @ J16 IN to J17 OUT *10˚C to 40˚C; Specifications subject to change without notice Cross Technologies, Inc. • 6170 Shiloh Road • Alpharetta, GA 30005 www.crosstechnologies.com • 770.886.8005 • FAX 770.886.7964