Transcript
16-Port 10/100/1000M PoE Injector Midspan, 250W PNG-A1200-16P-250
16-Port Gigabit RJ45 (Data in) 16-Port Gigabit RJ45 (Data + Power out) IEEE 802.3af / 802.3at PoE standard Up to 30 watts per PoE port 250 watts PoE power budget PoE power over 2-pairs Up to 100 meters network distance Overload & surge protection Plug-and-play installation Inbuilt power supply 19 inch standard rack mount chassis Operation temperature -10 to 45C
This AFENION PoE Injector Midspan with 16 x Gigabit RJ45 port (Data in) and 16 x Gigabit RJ45 port (Data + Power out) is fully complied with IEEE 802.3at PoE-Plus standard at maximum 30W power budget per port; it is also backward compatible with IEEE 802.3af PoE standard as well. The Gigabit port supports 10/100/1000Mbps auto-sensing auto-MDIX and sets itself for the optimal speed. The PoE port can automatically detect and supply power with IEEE 802.3af / 802.3at powered devices (PD), the electrical power is transmitted, along with data, in one single cable allowing you to expand your network to where there are no power lines or outlets, ideal for where you wish to locate Access Point, IP Camera or IP Phone, etc. It helps to save infrastructure wiring costs dramatically by eliminating electric wiring and less UPS needed. This PoE Injector Midspan works right out of the box, a true plug-n-play solution with no software to install and nothing to configure. It is designed specifically to power 802.11n, 802.11ac WLAN access point, PTZ (Pan-Tilt-Zoom) IP camera, IP videophone and thin client terminal. It provides a quick, safe and economical way to add PoE to existing non-PoE network and helps to create a more efficient, better-connected networking environment.
www.afenion.com
AFENION TECHNOLOGY PTE LTD
Specification Standards
IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3af Power over Ethernet PoE IEEE 802.3at Power over Ethernet PoE-Plus
Interface
16 x 10/100/1000Mbps RJ45 (Data in) 16 x 10/100/1000Mbps RJ45 (Data + Power out)
LED Indicator
PWR (Green): AC power status PoE (Amber): PoE PD is connected
PoE
IEEE 802.3af PoE IEEE 802.3at PoE-Plus Up to 30 watts per port PoE Power Budget: 250 watts Pin assignment: 4/5(+), 7/8(-)
Data Transfer Rate
Ethernet: 10Mbps (Half duplex), 20Mbps (Full duplex) Fast Ethernet: 100Mbps (Half duplex), 200Mbps (Full duplex) Gigabit Ethernet: 2000 Mbps (Full duplex)
Management
Plug-and-play installation
Surge Protection
AC Port: 6kV RJ45 Port: 4kV
Power
Input: AC 100 to 260V, 50-60Hz Output: DC 50V @ 5.0A Consumption: 1.8 watts (Standby) Built-in power supply
MTBF
87,600 hours @ 25 C
Physical
Operation Temperature: -10 to 45 C Operation Humidity: 5 to 90% non-condensing Dimension: 440 x 250 x 44 mm Weight: 3.2 kg
Warranty
2 Years
Approval & Safety
CE FCC Class A RoHS
Package Contents
PoE Injector Midspan Quick Installation Guide Power Cord
www.afenion.com
AFENION TECHNOLOGY PTE LTD
Ordering Information Model No.
PNG-A1200-16P-250
Description
16-Port 10/100/1000M PoE Injector Midspan, 250W
www.afenion.com
AFENION TECHNOLOGY PTE LTD
