Transcript
16CH H.264 NVR
INSTRUCTION MANUAL
Introduction The 16-channel NVR L series Network Video Recorder offers a standalone solution for managing IP cameras and systems. It uses high quality H.264 decoders to deliver 3MP/1080P/720P/D1/VGA/CIF IP camera streams. Each channel can be individually configured to SD and or HD resolution to optimize storage space. Embedded HDMI(VGA) engines offer 3D intellectual motion adoptive refinement, providing a maximum resolution of 1080P. The TV wall design allows the NVR to be cascaded via TCP/IP network for easy cabling. The NVR has an IP scan facility, (WS Discovery) which locates all the cameras on the network and imports a preview thumbnail of each channel. This is an automated installation wizard that speeds up commissioning. The self-diagnostic feature monitors the internal temperature, cooling fan, HDD I/O speed, S.M.A.R.T , network status and information can be accessed via the health check report. The NVR can be controlled via multiple input methods; remote control, touch screen monitor, or USB mouse. When connected to a touch screen monitor, Smartphone style features like ‘pinch and zoom’ can be used to navigate the system. The NVR provides various export methods including USB DVD/RW, USB flash disk, and HTTP download playable via Backup Manager or Remote Player. Extensive support for iPhone, iPad, BlackBerry and Android allows for remote viewing of the connected cameras at high frame rates. Browser based remote live monitoring and video playback features are also supported.
Features • • • • • • • • • •
Standalone NVR. Touch screen interface. Up to 3MP IP camera support. Up to 1080P 60FPS IP Camera support. Up to 48/40/32 Mbps network throughput. Full HD 1920*1080P HDMI and VGA output. Mobile phone( iOS 、Android ) solution provided. Extern metadata receive through USB interface. IP scan utility. Navigator software supported.
Trademarks and registered trademarks • • • • •
Microsoft, Windows, Internet Explorer are registered trademarks of Microsoft Corporation in the U.S and/or other countries. Adobe and Adobe PDF are registered trademarks of Adobe Systems Incorporated in the U.S and/or other countries. JavaScript and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S and/or other countries. Linux, Macintosh, Mozilla, and Netscape Navigator are registered trademarks of the respective holders. Other names of companies and their products mentioned in this manual may be trademarks or registered trademarks of their respective owners.
Caution • • • • • • • • •
Do not drop or strike the equipment Do not install the equipment near naked flames or heat sources Do not expose this unit to rain, moisture, smoke or dusty environments Do not cover the opening of the cabinet with cloth or plastic or install this unit in a ventilated place. Allow 10cm between this unit and its surroundings Do not continue to operate the unit under abnormal conditions such as detection of smoke, strange smell or no display on screen whilst power is turned on Do not touch the power connection with wet hands Do not damage the power cord or leave it under pressure To avoid unnecessary magnetic interference, do not operate this unit near magnets, speaker system, etc. All connection cables must be grounded properly
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Front-Panel
1. 2. 3.
POWER LED (Yellow) NVR power on/off indicator LAN LED (Green) LAN link light HDD LED (Green blinking) HDD activating indicator
4. 5.
Alarm LED (Red blinking) Indicates motion or alarm triggers USB 2.0 port
Remote control The remote control is a small wireless handheld device with an array of buttons for adjusting settings. The buttons are separated in regions based on their features including NVR operational keys, Pan, Tilt, and Zoom (PTZ) and numerical keys. NVR remote control operational keys MENU
Setup menu
ESC
Escape/exit/stop
SHIFT
Split and full screen switch
ZOOM
Digital video zooming
REC
Record/stop recording
FREEZE
Live video freeze Pause Playback Stop Fast forward Fast rewind Next single channel Previous single channel 4 split display 8 split display 9 split display 16 split display
AUDIO
Audio/mute
BACKUP
Video backup
DVR/NVR
Addressable NVR control
LANGUAGE
Language selection
BACKSPACE
Delete character
Auto Pan
Perform auto pan feature
Zoom in
Zoom in
Move up/tilt up Move down/tilt down
Zoom out
Zoom out
Move left/pan left
Preset
Call preset
Move right/pan right
0 to 9
Numerical keys
Enter/set
Touch screen Pinch Zoom Out
Swipe
Pinch and zoom: Pinch the area on the touch screen where you want to zoom. To zoom in move your fingers outwards, and to zoom out move your fingers inwards Scroll screen: Swipe the screen left and right to navigate through the menus Single tap: Tap icons to select Double tap: Double tap in camera view to return to previous menu
Rear Panel
1. LAN RJ-45 connector
2.VGA Output 3.AUDIO Output 4.HDMI Output 5. USB 2.0 connector(#1)
USB flash disk / USB DVD/RW / USB mouse / USB touch monitor
6.DC 12V input 7.Power On/Off 8.DI/DO Connector( 400fps Model )
Connect power supply, monitor, network cable and control device Note: For easy installation, it is recommended that you connect a touch screen monitor or USB mouse.
HDD Info
HDD INFO shows the following information: • • • • • • •
Model — HDD model Size —the capacity of the hard disk drive Status — indicates whether the HDD is formatted or unformatted Select — “□“ indicates that the HDD is selected Approximate recording hour—recording hours based on the HDD(s) Approximate recording days—recording days based on the HDD(s) Average REC size—average recording data size
HDD Format Select the HDD(s) you wish to format, select the HDD format menu item. A password is required for preventing unauthorized access. A warning message will also prompt you for formatting verification Warning: Formatting a HDD will erase all recorded data on that drive.
File system defragmentation This function allows you to perform a file system check and repair of the HDD. If a HDD is reported to be defective, run the system check function.
Password/Access The NVR can be configured for up to 15 users with different access rights Scroll to select between: Admin (default password 1111) Operator (default password 2222) Guest (default password 3333) Users 1 to 12 Once a user is selected you can edit passwords, enable password protection and set up the following user rights: • • • • •
Allow Allow Allow Allow Allow
Setup Playback PTZ Backup Division
• • • • •
Allow Allow Allow Allow Allow
Shutdown Alarm Shortcut Network Setup Network Playback
Note: In the event of a forgotten password, please contact your sales agent.
Firmware update Firmware update allows you to upgrade the NVR’s firmware for improving system performance. To perform firmware update, press Enter on Setup > System > Firmware Update. There are two ways to perform firmware update (1) via USB flash disk at the NVR site (2) via HTML interface via network Prepare firmware To prepare a firmware update, create a directory called ‘firmware’ in the USB flash disk. The USB flash disk should use the file system FAT-32. Visit our official web site to download the latest firmware and save the file in the directory mentioned above. The firmware name of the NVR is ‘Flashnvr400l.bin’/‘Flashnvr200l.bin’/‘Flashnvr100l.bin’.
To perform firmware update using USB flash disk, follow the instructions: 1. Plug in a portable USB disk at the NVR’s USB port 2. Press Enter to start firmware update 3. After the transfer has finished, remove the USB device and reboot the NVR. 4. Ensure that the firmware is located in the firmware directory of the USB disk
Logon Type in the NVR’s IP address in the HTTP address box via Internet browser A log on screen will appear, enter your user name and password
Once entered the NVR home page will appear:
Firmware update This NVR is set to perform firmware upgrade via network. After the NVR receives the firmware, it starts to perform firmware upgrade automatically. After finishing the firmware update, the HTML page will reload. The user can then continue to operate the NVR. To perform network firmware update, click on Browse button and locate the firmware. Note: Ensure there is a good connection whilst attempting a firmware update. Failure in the network connection could result in firmware update failure and the unit may become non-operational.
Appendix A 1. DI/DO Connector( 400fps Model )
Appendix B 3.5-inch HDD WD1003FZEX Black 1TB 3.5-inch SATA HDD WD10PURX Purple 1TB 3.5-inch Monitoring HDD WD20PURX Purple 2TB 3.5-inch Monitoring HDD WD30PURX Purple 3TB 3.5-inch Monitoring HDD WesternDigital
WD40PURX Purple 4TB 3.5-inch Monitoring HDD WD60PURX Purple 6TB 3.5-inch Monitoring HDD WD5000AZRX Green 500GB 3.5-inch SATA HDD WD10EZRX Green 1TB 3.5-inch SATA HDD WD20EZRX Green 2TB 3.5-inch SATA HDD WD30EZRX Green 3TB 3.5-inch SATA HDD ST3320613AS Seagate Barracuda 7200.11 320GB ST3500418AS Seagate Barracuda 7200.12 500GB
Seagate
ST2000DM001 Seagate Barracuda 2000GB ST3000DM001 Seagate Barracuda 3000GB ST4000DM000 Seagate Desktop HDD 4000GB
HITACHI
HDS721010CLA332 HITACHI 1TB 3.5-inch SATA HDD(32M)
Appendix C 1.
2.
Supported USB-DVD/RW Manufacturer
Model
SONY
DRX-S30U-W
LITE-ON
eSAU108
LITE-ON
eTAU108
LITE-ON
eHAU424-01
Supported DVD Disk Brand
Specification
Capacity
Max Speed
Note
Melody
DVD-RW
4.7GB
4x
Rewritable
RiTEK
DVD-RW
4.7GB
8x
Rewritable
Sony
DVD+R
4.7GB
8x
Burn once
OEM disk
DVD-R
4.7GB
8x
Burn once
Appendix D Supported USB Flash Disk • Transcend: • Kingston: • Sandisk:
8G 4G 8G
Appendix E Supported USB GPS Receiver • GOSGET: BU-373 • GOSGET: SD-200 • GLOBALSAT: ND-100S GPS Protocol: GPRMC、GPGGA
16G 8G 16G
16G
Appendix F Supported USB Touch Screen • GeChic On-Lap1002 • Hanns HT271HPB • Hanns HT231HPB • ViewSonic TD2220-2(Wistron) • ViewSonic TD2220 • DELL E2014Tt • DELL 2240T
• • • • • • •
DELL 2340T DELL ST2220T Iiyama ProLite T2452MTS Planar PXL2430MW Acer T232HL HP L2206tm ELO ET2201L
Appendix G Hard Disk Recording Table Recording Resolution Standard Definition (SD) Size
HDD
40
KB/PIC
High Definition (HD) 102
KB/PIC
500
GB
1.5
Days
11
Hours
750
GB
2
Days
17
Hours
1000
GB
3
Days
23
Hours
2000
GB
6
Days
47
Hours
Recording days capacity is calculated by the following formula: • 2TB HDD, Recording Resolution Setting to = “Standard” • One day recording capacity of HDD = 40KB * 100 (Total FPS) *60 (Seconds) *60 (Minutes)* 24 (Hours) ÷ 1024 ÷ 1024 =330GB • Approx. 2TB Recording Day(s) = 2000 GB ÷ 330GB = 6 Days
Appendix H Troubleshooting & FAQ Question: Should I use a gigabit network switch or a 10/100 MPBS network switch for connecting to the NVR? Answer: It is highly recommended to use a gigabit RJ-45 port for connecting to the NVR. You can still use 10/100 MBPS ports from a switch for connecting IP cameras.
Question: Should I use RTP/UDP protocol for connecting IP cameras to the NVR? Answer: In LAN environments please use RTP/TCP or RTP/HTTP protocol (default setting) for connecting IP cameras to the NVR Touch series. It is not recommend that you connect IP cameras via the Internet due to bandwidth issues. If connecting IP cameras via the Internet is essential, please use RTP/HTTP protocol.
Question: Does the NVR provide UTF-8(multi-nation) support for camera names? Answer: Yes, the NVR provides UTF-8 for camera names. To do so, login to NVR Touch series settings via a browser and open Camera Name section. Here you can edit your UTF-8 camera name.
Question: What are the error codes and how do I solve the connection problem? Error code: IP LOSS Explanation: The IP camera is not on the network. Solution: Check the RJ-45 connection and IP address for the camera. Error code: AUTH ERR Explanation: The username and password are incorrect for the IP camera and the NVR Touch. Solution: The default username for the IP Camera is ‘admin’. The default password is ‘pass’. If you have changed your username or password, you will need to use this.
Error code: URI ERR Explanation: The NVR Touch does not support this IP camera. Solution: Please perform a firmware update for this IP camera. Error code: PROFILE ERR Explanation: The H.264 streaming profile might be not opened for the IP camera. Solution: Please enable both H.264 D1 and 1080P both streaming for IP camera. The NVR requires both streamings of high definition (HD) and standard definition (SD). D1 and VGA resolutions are SD streaming. 1080P and 720P resolutions are HD streaming. The NVR Touch does not support streaming above 3MP such as 5MP and 4K streamings. For 5MP and 4K IP cameras, please lower the resolution to 3MP or 2MP.
NVR L Series Multi-Touch Stand Alone Network Video Recorder Specification Models
IP Video Input
Video Display
Recording
Supports
Network camera
Input Resolution Max. Frame Rate
16CH CIF / VGA / D1 / 960H / 1M / 1.3M / 1080P / 3M 100 FPS 200 FPS
Output Split Screen
HDMI / VGA 1080P 1 / 4 / 8 / 9 / 13 / 16, sequence mode, freeze
Digital Zoom
Up to 64× on live and playback
Multi-Touch Backlight Saving
Support USB multi-touch Screen Adjustable idle time 30~60 sec.
Encode Max. Network Through Put
H.264
Resolution
CIF ~ 3M
Network camera
32Mbps
40Mbps
Network camera / ONVIF Profile S
400 FPS
48Mbps
Frame Rate
Single channel up to 1080P 60 FPS
Mode Schedule Event
Manual, schedule( continue, event, none) Each channel 7day × 24 hours time table, recording mode configurable Motion grid (20×12, multi-level sensitivities) / network camera event / DI ( 400fps Model )
Alarm Notification Search
Alarm notification iOS、android / E-Mail / FTP / buzzer / DO ( 400fps Model ) Alarm event / Operation event / System event / Meta data event / Time search
Display
16CH synchronous playback
Max. Division Display
100FPS
Resolution Frame Rate
CIF ~ 3M Single channel up to 1080P 60FPS
Speed
Fast rewind 2×~64× / Fast forward 2×~64× / Step Forward
HDD Supported (Up to 4TB)
2 × 3.5” HDD
USB Flash Disk
Up to 32 GB
Backup
Network DVD/RW
Via HTTP / FTP External USB DVD/RW
Audio
Input
16 CH(network camera), G.711 8K
Ports Protocols
Gigabit Ethernet,RJ45 ×1 ARP / TCP/IP / UDP / HTTP / SMTP / FTP / DDNS / PPPoE / NTP / RTP / RTSP / DHCP/ SDDP
Web Mobile Phone
Direct internet browser access / Multiple users access iOS / Android supported
IPScan / WSDiscovery CMS Backup / Playback
WS-Discovery and IP Scan, Automatically quick IP address setup for network cameras
Ports Reports
None DI × 2 and DO × 2 (NO/NC) Alarm event、operation and configuration full reports exporting over HTTP or USB
Authentication Multi-Language
User authentication with feature configurable English、Traditional Chinese、German、Italian、Portuguese、Spanish、French、Turkish、Hungarian、 Polish、Russian、Arabic、Simplified Chinese
Playback
Storage
Network
Software Alarm
System
Accessories
Others
Power and Working Env.
200FPS
400FPS
4 × 3.5” HDD
NAVIGATOR Remote Playback Manager / Backupman, multiple NVRs file download and multi-channel playback
HDD Inspection
S.M.A.R.T monitoring / File system de-fragmentation
Recording Day Time
Automatic recording day calculator Daylight saving / NTP / External USB GPS time sync
PTZ Protocols Remote Control
HTTP HTTP Remote controller addressable up to 255 NVRs
Mouse
Mouse click、drag and scroll
Audio Output
RCA × 1 (0.7Vp-p, 300 Hz to 3KHz)
CPU/OS
ARM Cortex A9, Embedded Linux Kernel 2.6
WDT Power
Hardware watchdog timer DC 12V, 5A, 60W
Working Env. Dimension (W×L×H) Weight
Temp : 0℃ ~ 45℃ / Humidity : 5%–80% 360 × 316 × 60 mm 3 Kg ( w/o HDD )
HTTP / ONVIF
DC 12V, 6.67A, 80W
DISTRIBUTOR：
66-NVR400LOOE-1
