Preview only show first 10 pages with watermark. For full document please download

1823 Voip Gateway Quick Installation Instructions

   EMBED

Share

Transcript

1823 VoIP Gateway Quick Installation Instructions Document Number 1823-A2-GZ10-00 May 2005 Installation ➊ Connect the power adapter to the Power jack of the 1823 VoIP Gateway, and then plug the power adapter into an AC wall outlet. ➋ Use an RJ11 connector cable to connect an analog telephone to the Phone1 port, and, if your service provider has provisioned two lines, the Phone2 port. An RJ11 cable is supplied with the gateway. POWER Reset Button ➌ Use RJ45 cables to connect the LAN 1X, 2X, and 3X ports of the gateway to your Ethernet devices, such as a hub or the Ethernet port of your PC. An RJ45 cable is supplied with the gateway. E2 LAN 1X 2X Telephone Device See the user’s guide on the CD for more information. *1823-A2-GZ10-00* *1823-A2-GZ10-00* 3X 05-17661 LAN Port ADSL / Cable Modem Power Cable modem's LAN port with an RJ45 cable. (If your modem's LAN port is currently connected to your PC, disconnect the cable from the modem's LAN port and use it to connect your PC to one of the LAN ports of the gateway. Then use another RJ45 cable to connect the WAN port of the gateway to your modem's LAN port.) WAN Ethernet Cable (RJ45) Telephone Cable (RJ11) ➍ Connect the WAN port of the gateway to your ADSL or cable Copyright 2005 Paradyne Corporation. Printed in U.S.A. PHONE1 PHON Internet PC