Transcript
Ø 1.83 mm T-Nailer
ST1850C2 No. 00930000290
Height ………………………................................….….…………….... : 10 7/8” (275 mm) Width ………………………................................….….……………..... : 3” (83.3 mm) Length ………………………................................….….……………... : 10 7/16” (265 mm) Weight ………………………................................….….……………... : 3.1 lbs. (1.41 kgs)
3
Recommended Operating Pressure .............................................. : 70-110 psi (4.9-7.6 bar) Air Consumption ………………………..........................…………..... :
3
Loading Capacity ………………………................................….….… : 60 nails
3
A-weighted single-event sound power level .................................... : LpA,1s = 99 dBA
NOISE CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 3774, ISO 11201: A-weighted single-event sound pressure level at operator’s position : LpA,1s = 91 dBA A-weighted single-event surface sound pressure level ................... : LpA,1s = 86 dBA VIBRATION CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 8862-1:
4-6
7
Weighted root mean square acceleration ………………………. =2.8 m/s
2
Shank Diameter ………………......................……...….…….…...…… : ø1.83mm T-Nails Nail Lengths………….……...............................................…………… : 3/4” - 2”(18-50mm) Nail Stick Angle ………….………………….......................….……….. : Straight
8 360° DEFLECTOR
8-10
11 TRIGGER DEPTH ADJUSTING LATCH
CONTACT TRIP MAGAZINE
2
3
4
5
ACTUATING TOOL
6
7
Clearing a Jammed Nail Should a nail jam occur, keep the tool pointed away from you and follow these instructions to clear. 1. Disconnect air supply from tool. 2. Remove fasteners from the tool. 3. Use Allen wrench to loose two screws (A) and open the door. 4. Remove jammed fastener. Close the door and tighten the screws.
A
8
10
5. Connect air supply and replace fasteners.
9
11
