Transcript
18HX / HJX Chain
Harvester Saw Chain: Reliable Cutting Performance in Extreme Conditions Specifications
FEATURES
Chain Pitch
.404"
Chain Gauge
.080"
Cutter Style
Micro-Chisel®
÷2
Micro-Chisel® Cutter
Advanced Chrome-Plating Process
Thicker Drive Link File Size Grind Size
7/32" 3/16"
Sequence
18HX 18HJX
Recommended User
Harvester
Blued Cutters Longer Rivets
BENEFITS • Small radius working corners for excellent performance, resistance to wear and ease of sharpening • Maximum cutter stay-sharp; holds its edge in brutal conditions involving high speed and cold weather • Oregon® patented OCS-01 steel is designed to have long-lasting durability in the toughest conditions, including low temperatures • Wider and tougher above the groove for increased strength, increased reliability, longer life and less binding • Superior corrosion resistance • Base-cutter hardness consistency • 17% larger bearing surfaces helps reduce stretch and provides better fatigue resistance • Helps keep oil where it’s needed, on the chain • Directs oil to the critical rivet flange/hole interface
OREGON® • Blount Inc. • oregonchain.com
18HX / HJX Chain Sharpening notes * When using an OREGON® file guide, ALWAYS hold it level, 0°, flat on the Top Plate
SHARPENING & GRINDING TOOL PART NUMBERS
* 511AX
Do not use 18HX/HJX saw chain on hand held saws.
31686
(12)
5-3/4" Dia.
(12)
(10)
70502
OR 534-316
12211
38850
SHARPENING & GRINDING ANGLES
WARNING There is risk of serious injury or death to machine operators and bystanders from “Chain Shot,” which is the highspeed ejection of chain parts that can occur in the event of a b roken chain. Follow the application, inspection and maintenance instructions provided here, and with your harvester equipment. Do not use chain: • that has been severely damaged • that has broken components • that has loose rivet joints (if you can rotate the rivets with your fingers, they’re too loose) • that has been broken twice
7/32"
35°
10°
3/16"
35°
10°
.050" / 1.27mm
60°
.050" / 1.27mm
SAW CHAIN REPLACEMENT PARTs and Numbers avertissement Il y a risque de blessures graves, mêmes fatales, à l’opérateur et aux spectateurs par l’éjection à haute vitesse de pièces de chaîne qui peut se produire si la chaîne casse. Suivez les instructions d’application, d’inspection et d’entretien ci-jointes et celles fournies avec votre équipement d’abattage mécanique. N’utilisez pas une chaîne:
512890
512891
518812
512893
512892
Replacement parts come in packs of 25
Recommended Chain Speeds
• qui est trop endommagée • qui a des pièces brisées • qui a des joints de rivet desserrés (si vous pouvez tourner les rivets avec vos doigts, ils ne sont pas assez serrés) • qui a cassé deux fois
Minimum
Recommended
Maximum
3,000 ft./min. 15 m/sec.
8,000 ft./min. 40 m/sec.
8,000 ft./min. 40 m/sec.
OREGON® and Micro-Chisel are registered trademarks and LubriLink is a trademark of Blount, Inc. For more information on these and other Oregon® products, contact your authorized Oregon® distributor, or: OREGON®, BLOUNT, INC. PO Box 22127 · Portland, OR, U.S.A. 97269-2127 Phone: 503-653-8881 Fax: 503-653-4201 Web: oregonchain.com OREGON DISTRIBUTION LTD. 505 Edinburgh Rd. N., Guelph, Ontario, Canada N1H 6L4 Phone: 519-822-6870 Fax: 519-822-4999
OREGON® • Blount Inc. • oregonchain.com 18HX/HJX Chain A107206 AB 9/10
