Preview only show first 10 pages with watermark. For full document please download

18x4c 19x4c Gd1920c Bb Operator's Guide

   EMBED

Share

Transcript

VX2 MODEL 1824C/1834C/1934C/ 1944C/1954C-BB GD-1920C-BB Operator’s Guide The purpose of this Operator's Guide is to provide basic operating procedures for this equipment. For more detailed information see the Operator's Manual. Displays the mode selection window. Momentary press: Registers own ship's position as a waypoint. Clears data; erases selected mark. Press three seconds: Marks man overboard position. Opens/closes the alarm menu. Shows or hides the soft Selects a range. keys, function keys, nav data. Enter alphanumeric data. CLEAR ABC 1 DEF 2 GHI 3 HIDE SHOW Soft keys A B RANGE POWER TX SAVE MOB JKL 4 MNO 5 PQR 6 STU 7 VWX 8 YZ& 9 _'# 0 ALARM DISP MENU C GAIN D EBL VRM E PUSH TO ENTER Opens/closes the main menu. Displays soft keys for EBL/VRM. Radar: Displays the soft keys for adjustment of gain, A/C SEA, A/C RAIN. Sounder: Adjusts gain. ENTER knob Press three seconds: Turns power off. Momentary press: Turns the power on, and shows D: RADAR STBY/TX soft key. Trackball Shifts EBL/VRM and cursor; selects menu items and options. Push: Registers setting. Rotate: Adjusts gain, VRM, EBL, etc.; selects menu items and options. May also be used to enter alphanumeric data. Turning the Power On/Off Selecting a Display Turning on the power Press the POWER/TX key momentary. 1. 2. Turning off the power Press and hold down the POWER/TX key until the screen goes off (approx. 3 sec.) 3. 4. Press the DISP key to show the display selection window. Rotate the ENTER knob to select a basic display screen, and then push it. Rotate the ENTER knob to select a combination display. Push the ENTER knob. Transmitting, Stand-by 2. 1. Press the POWER/TX key momentarily to sow soft keys. 2. Press the D:RADAR STBY soft key to highlight TX on its label. 3. Press the E: RETURN soft key. To return to Stand-by mode, press the D: RADAR TX soft key to highlight STBY on its label. 3. 4. Measuring Range by VRM 1. Selecting the Range Scale Press the RANGE (+ or -) key to change the range scale. 2. Adjusting the Gain 1. 2. For A/C SEA, rotate the ENTER knob to select the appropriate setting. When selecting MAN, rotate the ENTER knob to adjust. For A/C RAIN, rotate the ENTER knob to adjust. Press the GAIN key or E: RETURN soft key to finish. Press the GAIN key. Press the A: GAIN soft key to show the gain sensitivity setting window. Press the EBL/VRM key followed by B: VRM1 ON (dotted ring) or E: VRM2 ON (dashed ring) soft key to show appropriate VRM. Rotate the ENTER knob to place the VRM on the inside edge of a radar target, and read the VRM indication to find range. To erase a VRM, press appropriate VRM soft key (B or E) followed by the CLEAR key. GAIN SENSITIVITY ¤ AUTO ¡ AUTO ¡ AUTO ¡ MAN 3. 4. Measuring the Bearing ROUGH MODERATE CALM 1. 0 Use the trackball to select AUTO ROUGH, AUTO MODERATE, AUTO CALM or MAN (manual) as appropriate. For manual adjustment, rotate the ENTER knob to adjust, while observing the radar echo. Press the GAIN key or the E: RETURN soft key to finish. 2. Press the EBL/VRM key followed by A: EBL 1 ON (dotted line) or D: EBL 2 ON (dashed line) soft key to show the appropriate EBL. Rotate the ENTER knob to bisect the radar target with the EBL, and read the EBL indication to find bearing. To erase an EBL, press appropriate EBL soft key (A or D) followed by the CLEAR key. 12/LP 3nm H-UP EBL1 (Dotted) Adjusting the A/C SEA, RAIN 1. 319. 9°M VRM2 (Dashed) Press the GAIN key followed by B: A/C SEA or C: A/C RAIN soft key to show the appropriate setting window. B VRM1 ON EBL2 ON E VRM2 ON EBL1 A/C SEA window EBL1 ON D EBL2 (Dashed) EBL1 bearing/ VRM1 range A C OFFSET VRM1 (Dotted) A/C SEA AUTO ROUGH AUTO MODERATE AUTO CALM 0 MAN EBL VRM VRM1 330.1°R 3.123nm EBL2 VRM2 234.1°R 9.343nm + 359.9 ˚R 11.70nm Active marker is highlighted. A/C RAIN 0 EBL2 bearing/ VRM2 range A/C RAIN window 2 Changing Chart Scale ROUTE NAME 001 Press the RANGE - key (shrinks the scale, and expands image) or RANGE + key (expands the scale, and shrinks image). COMMENT NEW ROUTE A PLOT B LOCAL LIST C ALPHA LIST D CONECT Entering a Mark 1. 2. E CANCEL Place the cursor where you want a mark appear. Press the A: MARK ENTRY soft key. 3. 4. Entering a Waypoint at Own Ship Position 5. 6. Press the SAVE/MOB key momentarily to store your position as a waypoint. Press the B: LOCAL LIST or C: ALPHA LIST soft key to open the waypoint list. Use the trackball to select a waypoint, then press the A: ADD WPT soft key. Repeat step 4 to complete the route. Press the D: SAVE soft key to register the route, and then press the MENU key. Navigating to Waypoints Entering a Waypoint with Cursor 1. 2. 3. 1. 2. Press the MENU key, C: WAYPOINTS/ROUTES, A: WAYPOINTS and C: WAYPOINT BY CURSOR soft keys in order to show the plotter display. Operate the trackball to place the cursor where you want to enter a waypoint. Press the D: NEW WAYPOINT soft key. Setting Arrival Alarm 1. 2. 3. ▲ 0 0 1 W 359.9° PT 34°44.000'N 135°21.000'W ARRIVAL ALARM A SELECT MARK ▲ 002WPT 02:36 01JAN01 B COORD TYPE ▼ 34°44.000'N 135°21.000'W LAT C N< - - >S E< - - >W 0.00nm ¡ ON 0.010nm ¤ OFF COMMENT 00:00 01JAN00 LON 359.9° 0.00nm 34° 12. 134'N 4. 5. 003WPT 1 3 400:00 ° 1 201JAN00 . 345'W D SAVE 34°44.000'N 359.9° 135°21.000'W 0.00nm PROXIMITY ALARM RADIUS 0. 00nm E RETURN 6. Press the D: SAVE soft key. Creating a Route 1. 2. Press the ALARM key. Select ARRIVAL ALARM. Press the A: EDIT soft key to show the arrival alarm window. NEW WPT MARK NAME 4. Operate the trackball to select a waypoint on the plotter display. Press the D: GO TO WPT soft key. Press the MENU key, C: WAYPOINTS/ROUTES, B: ROUTES soft keys in order to show the ROUTE menu. Press the B: NEW ROUTE soft key to open the new route entry screen. 3 Use the trackball to select ON. Enter alarm range, and then press the C: ENTER soft key or ENTER knob to register setting. Press the ALARM key to finish. Reducing Low Level Noise 1. Press the MENU key, and then press the A: SOUNDER MENU soft key. 2. Select CLUTTER, then press the A: EDIT soft key to show the clutter window. 3. Adjust the trackball upward or downward. 4. Press the E: RETURN soft key followed by the MENU key to close the menu. Variable Range Marker (White) Depth scale Time Minute marker Zero line Icons (alarm, battery, simulation) Color bar 0'30" SI °F 50 50.0 Fish echo 40 Temp. scale 0 M 50 Cross-hair cursor 100 30 Picture Advance Speed Water temp. graph 150 1. 120 Water LF temp. display Depth 200 Tx frequency 2. Bottom echo Selecting a sounder mode 3. 1. 2. 3. Press the D: DISPLAY MODE soft key to show the display mode window. Use the trackball or ENTER knob to select a display. Press the E: RETURN soft key to close the window. 4. Activating Sounder Alarms 1. Automatic Sounder Operation 2. 1. 2. 3. Press the B: AUTO/D.BOX soft key. Use the trackball or ENTER knob to select CRUISING or FISHING. Press the E: RETURN soft key. 3. 4. Manual Sounder Operation 5. 1. 2. Press the MENU key and A: SOUNDER MENU soft key in order. Select PICTURE ADVANCE, and then press the A: EDIT soft key to open the picture advance window. Use the trackball to select speed desired. Press the E: RETURN soft key followed by the MENU key to close the menu. Press the B: AUTO/D.BOX soft key. Select OFF (MANUAL), and then press the E: RETURN soft key. Press the ALARM key to show the ALARM menu. Use the trackball to select the alarm among BOTTOM, TEMPERATURE, FISH and FISH (B/L). Press the A: EDIT soft key. Select ON (for TEMPERATURE, WITHIN RANGE or OUT OF RANGE), and then key in the alarm range. Press the C: ENTER soft key (or ENTER key) followed by the ALARM key to close the menu. Adjusting the gain Press the GAIN key, and then adjust the ENTER knob or trackball. Shifting the basic range Press the A: SHIFT soft key, and then adjust the ENTER knob. PUB.NO.OSE-35490-A (0502,HIMA) MODEL 1824C-BB SERIES This manual is printed with soy ink. 4