Transcript
El
Electrical Oscilloscope Probes
190 Series II ScopeMeter ® Test Tools High-performance two- and four-channel scopes built for harsh industrial environments These portable oscilloscopes combine rugged portability with the performance of a bench scope, taking you from troubleshooting microelectronics all the way into power electronic applications. Easily measure input, output, and feedback signals simultaneously to diagnose industrial electronics, troubleshoot three-phase systems like variable speed drives, and UPS or backup generators. Units feature Connect-and-View™ triggering for intelligent, automatic triggering on fast, slow, and even complex signals with automatic capture and replay of up to 100 screens. TrendPlot™ paperless recorder function with deep memory is included for long-term automatic measurements and the frequency spectrum using FFT-analysis provides added flexibility. Additional features include four independent isolated inputs (up to 1000 V), high-speed sampling up to 2.5 GS/s, and isolated USB host port for direct data storage to a USB memory. What’s included: BC190 power adapter, BP291 double-capacity Li-ion battery pack (4-channel models), BP290 double capacity Li-ion battery pack (2-channel models), VPS410-R red probe set, VPS410-B blue probe set, VPS410-G gray probe set, VPS410-V green probe set, USB cable with mini B connector, hanging strap, side strap, CD user manual with FlukeView® ScopeMeter software demo version, and calibration document supplied by the manufacturer. The “/S” models add on FlukeView ScopeMeter software (full version) and carrying case. Catalog number Model Bandwidth (MHz) Max sample rate Max record length Inputs Input sensitivity Waveform math Display Compliance Dimensions (W x H x D) Power Price
T-20041-30 190-062
T-20041-31 190-062/S
T-20041-32 190-102
T-20041-33 190-102/S
T-20041-02 190-104
T-20041-03 190-104/S
20041-00 ®
T-20041-34 190-202
T-20041-35 190-202/S
T-20041-00 190-204
60 625 GS/s
100 100 200 200 1.25 GS/s 1.25 GS/s 2.5 GS/s 2.5 GS/s 10,000 per channel (scope mode); 30,000 per channel in ScopeRecord™ roll mode 2 2 4 2 4 2 mV to 100 V/div One mathematical operation on any two input channels: add/subtract/multiply; X-Y-mode frequency spectrum using FFT analysis Full-color high resolution backlit LCD (153 mm), 320 x 240 pixels CAT III-1000 V / CAT IV-600 V (EN61010-1) 71⁄2 " x 105⁄8 " x 23⁄4 " (19 x 27 x 7 cm) Li-ion battery; 4-channel models (4800 mAh; 7 hours), 2-channel models (2400 mAh; 4 hours)
T-17090-12 NIST-traceable calibration with data
120 Series ScopeMeter ® Test Tools Rugged solution for industrial troubleshooting and installation applications The compact ScopeMeter 120 series is an integrated test tool that combines an oscilloscope, multimeter, and a paperless recorder in one affordable, easy-to-use instrument. These dual-input digital oscilloscopes include two 5000-count True RMS digital multimeters, dual-input TrendPlot™ recorder, shielded test leads for oscilloscope, resistance and continuity measurements, optically isolated RS-232/USB interface, and Connect-andView™ trigger simplicity for hands-free operation. Model 125/003 also features industrial networks bus health testing, power, harmonics measurements, rpm and Hz reading, Vacpwm, and low impedance measurements—making it ideal for machinery maintenance and industrial network troubleshooting. What’s included: alligator clips, shielded BNC adapter, shielded test lead set, battery charger/line voltage adapter, user manual (CD and booklet), and rugged carrying case. Model 125/003 also includes an AC current clamp. ®
Catalog number Model Bandwidth (MHz) Max sample rate Max record length Inputs Input sensitivity Waveform math Scope measurements Bus health test function Power measurements Display Compliance Dimensions (W x H x D) Power Price
T-26091-00 123/003 20
T-26091-02 T-23031-65 124/003 125/003 40 40 25 MS/s 512 points (min / max pairs) 2; optional isolated external trig through ITP120 5 mV/div to 500 V/div — — Harmonics mode Cursors + 26 automatic Cursors + 26 automatic Same as 124/003 plus power, VA, measurements measurements VAR, PF, rpm, Vpwm; THD For standard industry buses Power, vA, VAR, PF, Vpwm Monochrome LCD with CCFL backlight, 240 x 240 pixels CAT III -600 V 41⁄2 " x 91⁄8 " x 2" (11.5 x 2.3 x 5 cm) Rechargeable NiMH battery, or line voltage via adapter/battery charger (all included)
T-17090-12 NIST-traceable calibration with data
522
T-20041-01 190-204/S
26091-00
Technical Assistance? Contact our expert Application Specialists to assist you. Call 1-847-549-7600 or go online to e-mail or chat live.
US Toll-free: 800-323-4340 • Outside the US: 1-847-549-7600 • www.coleparmer.com Canada 800-363-5900 • India 91-22-6716-2222 • UK 0500-345-300
