Preview only show first 10 pages with watermark. For full document please download

198004-198006_battery Drill And Charger_man_engl

   EMBED


Share

Transcript

Manual EICKEMEYER Battery Drill and Charger Quick Guide 198004, 198005, 198006 Manual EICKEMEYER Battery Drill and Charger 1 Overview 5 1 1 Attachment coupling 2 Trigger for speed regulation 3 Trigger for reverse oscillation 4 Battery casing cover 5 Wire guard 2 3 4 1.1 Speed and rotation direction control The top trigger (2) controls the forward speed. When the top trigger and bottom trigger (3) are pressed at the same time, the tool switches to reverse. When the bottom trigger is released, the tool switches to normal forward. 1.2 Safety system The drill automatically shuts off after 5 minutes without use. 1.3 Attachments To mount an attachment, follow these steps: Pull the coupling sleeve forward and insert the tool onto the attachment coupling (1). Rotate the attachment until it locks into place. Confirm the tool is seated correctly by gently applying traction. To disconnect, pull the coupling sleeve forward and remove the tool. NOTE: The same procedure is used for the compatible battery attachments. 3-jaw chuck, AO-chuck, DIN chuck, Harris and Hudson chuck and K-wire driver. 2 Battery 2.1 Inserting the battery in the battery casing The battery (Art.No. 198005) should be inserted into the battery casing by two people and one of them should be wearing sterile apparel. 2/6 Manual EICKEMEYER Battery Drill and Charger 4 Battery casing cover 6 Sterile cover 7 Unsterile battery - - - The surgeon wearing the sterile apparel holds the sterile battery casing and opens the cover (4). The individual wearing the sterile apparel places the sterile cover (6) on the battery casing. Please ensure that this is seated correctly. A second individual guides the unsterile battery (7) through the sterile cover (6) into the battery casing to ensure a correct seat. The battery should not contact the sterile outside of the casing. The second individual then removes the sterile cover (6) from the battery casing. The surgeon closes the battery casing with the cover (4) without contacting the battery or inside of casing. NOTE: Do not sterilise batteries. Assess batteries for any damage prior to use. 3/6 Manual EICKEMEYER Battery Drill and Charger 2.2 Charging battery (Art.No. charger: 198006) 7 8 9 10 - - - - Unsterile battery Power switch Charging status indication Charging dock Connect the unit's plug to a power outlet and switch on (8) the charging base. The charging status indicator (9) should light up. Insert the battery (7) into the charging dock (10) with the arrow facing down. Ensure that the battery is seated properly, which may require the battery to be rotated in the dock. The battery automatically switches to maintenance charging after it is fully charged. This ensures optimal battery charge levels . Battery charge time: approx. 1 hour NOTE: Indicator is red during charging state. Indicator is green when battery is fully charged. The charging base and battery have an increased temperature during the charging process: this is normal. Do not sterilise battery. Never immerse charging unit and battery in any liquid. 4/6 Manual EICKEMEYER Battery Drill and Charger 3 Symbols Stepless clockwise Reverse Warning Reed the instruction manual Type BF equipment No disposal at residual waste NiMh rechargeable battery must be recycled 4 Content EICKEMEYER Battery Drill and Charger __________________________________________________________________ 1 Overview ___________________________________________________________________________________________ 1.1 Speed and rotation direction control __________________________________________________________ 1.2 Safety system _________________________________________________________________________________ 1.3 Attachments___________________________________________________________________________________ 2 Battery _____________________________________________________________________________________________ 2.1 Inserting the battery in the battery casing _____________________________________________________ 2.2 Charging battery ______________________________________________________________________________ 3 Symbols ____________________________________________________________________________________________ 4 Content _____________________________________________________________________________________________ 5 Contact _____________________________________________________________________________________________ 1 2 2 2 2 2 2 4 5 5 6 5/6 Manual EICKEMEYER Battery Drill and Charger 5 Contact 6/6