Transcript
19”/2® CWS Server SRM301
The MilDef 19”/2® CWS Server SRM301 is a control unit acting as a SIP integration unit to the SIP IP-PBX and other infrastructure DECT elements in the configuration. The basic infrastructure of the CWS Server SRM 301 consists of the server, DECT IP Base Stations and DECT Handsets. One 19”/2® CWS Server SRM301 supports up to 24 simultaneous calls using G.729AB. You can easily expand the capacity by adding one or more 19”/2® CWS Resource SRM302. The CWS System can support up to a 768 simultaneous calls. Mounting All 19”/2units can be mounted together in several different ways -
One 19”/2 unit can be mounted in a 19” rack Two 19”/2 units can be mounted together in a 19” rack Two or more devices can also be stacked on top of each other
*MilDef reserves the right to update the information at any time without notice
19”/2® CWS Server SRM301
Technical Specification Description * *Picture below shows a typical installation Max. no of 19”/2® CWS Media Resource 6000 supported Max. no of IP Base Stations supported Max. no of registered handsets supported Max.no of simultaneous calls with one CWS Wireless Server, 31 Media Resource 6000
The MilDef 19”/2® CWS Server SRM301 is a control unit acting as a SIP integration unit to the SIP IP-PBX and handles the other infrastructure DECT elements in the configuration. 31
256 4096
1024 (using G.711) 768 (using G729AB)
*MilDef reserves the right to update the information at any time without notice
Protocol Support Supported Codecs Interfaces (front)
Power Consumption Case Dimensions Weight Other
Session Initiated Protocol (SIP) G. 711 A-law and µ-law G.729AB (Codec module required) 1 x LAN Fiber SC Multimode (100 Mbps, 1300 nm) 1 x LAN 10/100Mbps (RJ45) 1 x DC in 10-32 V Max 11 W (at 28 VDC) Aluminium 220 x 182 x 44 mm (W x D x H) 1,5 kg No fans
19”/2® CWS Resource SRM302
The MilDef 19”/2® CWS Resource SRM302 is used to expand the capacity of simultaneously voice calls with 24 G.729AB channels to the CWS Server SRM301 per CWS Resource SRM301. The 19”/2® CWS Resource SRM302 handles the media stream from the SIP server and distributes voice to DECT IP Base Stations.
Mounting All 19”/2units can be mounted together in several different ways -
One 19”/2 unit can be mounted in a 19” rack Two 19”/2 units can be mounted together in a 19” rack Two or more devices can also be stacked on top of each other
*MilDef reserves the right to update the information at any time without notice
19”/2® CWS Resource SRM302
Technical Specification Description
Max.no of simultaneous calls with one Media Resource 6000
Max.no of simultaneous calls with one CWS Wireless Server, 31 Media Resource 6000
1024 (using G.711) 768 (using G729AB)
Protocol Support Supported Codecs
Session Initiated Protocol (SIP) G. 711 A-law and µ-law G.729AB (Codec module required) 1 x LAN Fiber SC Multimode (100 Mbps, 1300 nm) 1 x LAN 10/100 Mbps (RJ45) (Amphenol MRJ-5484-MF) 1 x DC in 10-32 V Max 11 W (at 28 VDC)
Interfaces (front)
Power Consumption Case Dimensions Weight Other
SRM300 CWS System Technical Specification Issue 6, 2014-01-17
The MilDef 19”/2® CWS Resource SRM302 is used to expand the capacity of simultaneously voice calls with 24 G.729AB channels to the CWS Server SRM301 per CWS Resource SRM302. The 19”/2® CWS Resource SRM302 handles the media stream from the SIP server and distributes voice to DECT IP Base Stations. 24 (using G.729AB) 32 (using G.711)
Aluminium 220 x 182 x 44 mm (W x D x H) 1,5 kg No fans
www.mildef.com
