Transcript
19” RACK CABINETS - FREE STANDING TYPE 19 RACK CABINETS - WALL MOUNTING TYPE SERVER CABINETS - FREE STANDING TYPE 19” ESTAP DATA RACK
FREE STANDING TYPE FIBER TERMINATION BOXES
Technical Drawing
width=600mm. depth=1000mm. Order No
U
h
H
(=44.45mm.)
inside height(mm.)
outside height(mm)
Weight (kg)
SRV26U
26
1159
1284
84
SRV36U
36
1603
1728
127
SRV42U
42
1870
1995
142
width=800mm. depth=1000mm. Order No SRV42U8
12
U
h
H
(=44.45mm.)
inside height(mm.)
outside height(mm)
42
1870
1995
Weight (kg) 166
19” RACK CABINETS - FREE STANDING TYPE 19 RACK CABINETS - WALL MOUNTING TYPE SERVER CABINETS - FREE STANDING TYPE 19” ESTAP DATA RACK
19” Estap Data Rack - Free Standing Type FREE STANDING TYPE FIBER TERMINATION BOXES RELAYrack For that situation where quick access to the equipment is of primary importance.It is designed to house 19” standard mounting devices. Generally it is used in such an environment , minimum dustiness, air conditioned, protected against unauthorized access provided. The RELAYrack offers a highly cost-effective and assemblyfriendly solutions for numeroues applications in the field of network tecnology and electronics. Its smart design features to use it as single frame or double frame. When it is used as double frame, with an extension kit, depth can be adjustable.(d=600mm. or d=800mm.) 4 point fixings of sliding and fixed shelves is possible by using standart accessories. Because of its modular design, it is easy to assemble and dismantled. Please see accessories pages. Uprights are punched in full-length with square holes to use standart accessory cable ring for cable management. Standart with levelling feet. Its sturdy uprigh frames are 9-fold special frame on each side for maximum stability. Load carrying capacity is influenced by the distribution of the load. However, loads of 300kg. suitably distributed could be considered safe. When using mobile base care should be taken with excessive loads. STANDARDS * ISO9001:2000 * 19” mounting to IEC 297-1 * Overall cabinet dimensions to IEC 297-2 COMPLIANCES: UL and cUL
13
19” RACK CABINETS - FREE STANDING TYPE 19 RACK CABINETS - WALL MOUNTING TYPE SERVER CABINETS - FREE STANDING TYPE 19” ESTAP DATA RACK
FREE STANDING TYPE FIBER TERMINATION BOXES
Technical Drawing
Extension kit can be removed easily to change its depth = 640 mm.
width=536mm. Order No
14
U
h
H
(=44.45mm.)
inside height(mm.)
outside height(mm)
Weight (kg)
MLRCK36S
36
1603
1680
32
MLRCK36D
36
1603
1680
44
MLRCK42S
42
1870
1951
43
MLRCK42D
42
1870
1951
56
TOPCOVER66
optional
width=530mm.
depth=530mm.
TOPCOVER68
optional
width=530mm.
depth=730mm.
19” RACK CABINETS - FREE STANDING TYPE 19 RACK CABINETS - WALL MOUNTING TYPE SERVER CABINETS - FREE STANDING TYPE 19” ESTAP DATA RACK
19” Rack Cabinets - Free Standing Type FREE STANDING TYPE FIBER TERMINATION BOXES DIAMOND series Countless features…. The Diamond combines aesthetic and technic as one. The Diamond gives you a flexibility to make your own front door design, with your favorite colour choice, that makes you different and provides you and your company countless combinations . The harmonious and innovative design of the racks fits into every environment in your company. The Diamond is designed for the dynamic and modern companies, forms a harmony with human beings and interior. When you wish to present your company in a modern, efficient and beatiful environment, chooce Diamond. Smart cable management system provides you professional look and solutions. *Aesthetic *Secure *Modern *Functional *Professional *Impressive *Attractive *Strong *Stable all inclusive…. STANDARDS * ISO9001:2000 * 19” mounting to IEC 297-1 * Overall cabinet dimensions to IEC 297-2 COMPLIANCES: UL and cUL
Please see details in ESTAP-DIAMOND catalogues.
15
19” RACK CABINETS - FREE STANDING TYPE 19 RACK CABINETS - WALL MOUNTING TYPE SERVER CABINETS - FREE STANDING TYPE 19” ESTAP DATA RACK
19” Rack Cabinets - Wall Mounting Type FREE STANDING TYPE FIBER TERMINATION BOXES PROline The PROline cabinets provide an economic solution cabling installations. This series is a range of wall mounted or/and free standing enclosures used in offices for horizantal segments where a reduced amount of U height is required. Again the aesthetics creating a pleasing and professional look. Attention to styling with light grey Ral7035 with a smoked glass door reinforced with vertical left and right metal frames mean that cabinets can be deployed in the most demanding of office environments when looks really matter. Front door frames is available with decorative trim or customized as orange blue, green, light blue, red. Optimal mounting, hinging and panel mounting arrangements create a variety of equipment mounting an access arrangements. This allow the PROline to be used in almost all locations. Completely standart PROline wall mounting cabinet is delivered as a single enclosure and assembled. Wall mounted cabinets could be used as free standing by using accessories castor or levelling feet under a table or in any enviroment. STANDARDS * ISO9001:2000 * 19” mounting to IEC 297-1 * Overall cabinet dimensions to IEC 297-2 COMPLIANCES: UL and cUL
16
19” RACK CABINETS - FREE STANDING TYPE 19 RACK CABINETS - WALL MOUNTING TYPE SERVER CABINETS - FREE STANDING TYPE 19” ESTAP DATA RACK
19” Rack Cabinets - Wall Mounting Type FREE STANDING TYPE FIBER TERMINATION BOXES PROline Two sectioned
FEATURES *Easy to access Front door features a full-length smoked and shatterproof glass door with decorative accent trim reinforced with left/right metal frames and integral locking mechanism. Side doors; lockable, removable complete with a locks. Rear door; mechanically lockable, removable It is used as mounting plate at the same time. When mounting the enclosure, rear door is removed and mounted directly to wall and enclosure plug-in to the rear door. It’s benefits that, straight on wall, fast installation, low manpower, save time and cost-effective solution. All giving you 4-way access to equipment. *Cable access Multiple cable entry points on top(1ea) and bottom(1ea), provide maximum versatility. There is a rubber edge sliding cover mechanism that protects and fix the cables. On the rear door, there is also a cable entry hole closed with cover. When it is used, it is replaced with one of top/bottom rubber edge sliding cover mechanism. *Construction Rigid welded frame construction is in steel sheet. Corner of bases have welded sockets on each corner that tightly fixed into the columns gives maximum stability. Frames are made with 24-fold design for increased stability. Vented top cover provide passive heat transportation via convection. There are vented fan holes suitable for cooling unit. (see accessories) 19” mounting angles (front/2ea.) allow for flexible configuration and adjustable in depth. Extensive range of accessories
It is suitable for all wall mounting cabinets.
Rear door is used for mounting plate *Easy *Straight *Fast installation *Low manpower
17
19” RACK CABINETS - FREE STANDING TYPE 19 RACK CABINETS - WALL MOUNTING TYPE SERVER CABINETS - FREE STANDING TYPE 19” ESTAP DATA RACK
FREE STANDING TYPE FIBER TERMINATION BOXES
Technical Drawing
width=600mm. depth=450mm. Order No
U
h
H
(=44.45mm.)
inside height(mm.)
outside height(mm)
Weight (kg)
PRL07U45
7
314
381
21
PRL09U45
9
403
470
23
PRL12U45
12
536
604
26
PRL16U45
16
714
778
30
PRL20U45
20
892
960
35
width=600mm. depth=560mm. Order No
U
h
H
(=44.45mm.)
inside height(mm.)
outside height(mm)
Weight (kg)
PRL07U56
7
314
381
25
PRL09U56
9
403
470
28
PRL12U56
12
536
604
32
PRL16U56
16
714
778
36
PRL20U56
20
892
960
41
width=600mm. depth=(110+450)mm. Order No
18
U
h
H
(=44.45mm.)
inside height(mm.)
outside height(mm)
Weight (kg)
PRD07U56
7
314
381
27
PRD09U56
9
403
470
31
PRD12U56
12
536
604
35
PRD16U56
16
714
778
39
19” RACK CABINETS - FREE STANDING TYPE 19 RACK CABINETS - WALL MOUNTING TYPE SERVER CABINETS - FREE STANDING TYPE 19” ESTAP DATA RACK
19” Rack Cabinets - Wall Mounting Type FREE STANDING TYPE FIBER TERMINATION BOXES DIAMOND series Countless features…. The Diamond combines aesthetic and technic as one. The Diamond gives you a flexibility to make your own front door design, with your favorite colour choice, that makes you different and provides you and your company countless combinations . The harmonious and innovative design of the racks fits into every environment in your company. The Diamond is designed for the dynamic and modern companies, forms a harmony with human beings and interior. When you wish to present your company in a modern, efficient and beatiful environment, chooce Diamond. Smart cable management system provides you professional look and solutions. *Aesthetic *Secure *Modern *Functional *Professional *Impressive *Attractive *Strong *Stable all inclusive…. STANDARDS * ISO9001:2000 * 19” mounting to IEC 297-1 * Overall cabinet dimensions to IEC 297-2 COMPLIANCES: UL and cUL
Please see details in ESTAP-DIAMOND catalogues. width=600mm. depth=380mm. Order No
H
wing Frame
Teleskopic Frame
6U
---------
DIA MIDI
6U
5U - horizantal
738
39
DIA MAXI
6U
5U - vertical
1094
48
DIA MINI
outside height(mm) 394
Weight (kg) 17
19
19” RACK CABINETS - FREE STANDING TYPE 19 RACK CABINETS - WALL MOUNTING TYPE SERVER CABINETS - FREE STANDING TYPE 19” ESTAP DATA RACK
19” Rack Cabinets - Wall Mounting Type FREE STANDING TYPE FIBER TERMINATION BOXES SOHOline 19” 19” SOHOline cabinets provides an economical solution for wall mount mini-cabinets. The SOHOline features a modular, sturdy and compact design, ideal installation for, *Offices *Computer Aided Classes *Schools *Government Offices *Hotels *Branch Offices 7U
9U
12U
REDUCE ; %70 SHIPMENT %50 LABOUR COSTS Packaging: Unit comes in a FLAT PACKAGE, minimum assembly required. Load Carriying capacity: 30kg. STANDARDS * ISO9001:2000 * 19” mounting to IEC 297-1 * Overall cabinet dimensions to IEC 297-2 COMPLIANCES: UL and cUL FEATURES *Easy to access Front door features a full-length smoked and shatterproof glass door integral locking mechanism. Rear door; removable with 4 screws. *Cable access Pre-punched two(2) brush openning, one on top, one on bottom. Removable rear cable access panel. width=520mm. depth=400mm. Order No
U
h
H
(=44.45mm.) inside height(mm.) outside height(mm)
Weight (kg)
flat package dimensions(mm)
SOH07U40
7
314
358
16
420*550*130
SOH09U40
9
403
448
19
600*560*140
SOH12U40
12
536
582
23
600*560*140
20
*Construction Rigid frame construction in steel sheet, rapidly dismantled per 3 screw per corner. Top base is vented, pre-punched holes are available for top mount cooling system. 19” mounting angles (front/2ea.) and allow for flexible configuration and adjustable in depth. Extensive range of accessories
