Transcript
1" Dome Tweeter Type Number: D2606/920000 Features:
Key features: • • • • • • • •
High Performance Tweeter Coated Silk Fabric Diaphragm Low Damping Ferrofluid Cooling High Stability Linear response faceplate Dampened Cavity in Pole Piece Braided tinsel leads Neutral Design
Specs: Electrical Data Nominal impedance Minimum impedance Maximum impedance DC resistance Voice coil inductance T-S Parameters Resonance Frequency Mechanical Q factor Electrical Q factor Total Q factor Force factor Mechanical resistance Moving mass Suspension compliance Effective cone diameter Effective piston area Equivalent volume Sensitivity (2.83V/1m) Ratio BL/√(Re) Ratio fs/Qts
Zn Zmin Zo Re Le
fs Qms Qes Qts Bl Rms Mms Cms D Sd Vas
6 16 4,6 0,0
1100
2,70 0,30 7,10 91,36
ohm ohm ohm ohm mH
Hz
Tm Kg/s g mm/N cm cm2 ltrs dB
Power Handling 100h RMS noice test (IEC) Long-term Max Power (IEC18.3) Max linear SPL (rms) @ power Short-term Max Power (IEC18.2) Voice Coil and Magnet Parametres Voice coil diameter Voice coil height Voice coil layers Height of gap Linear excursion +/Max mech. Excursion +/Flux density of gap Total useful flux Diameter of magnet Height of magnet Weight of magnet Unit net weight Notes:
F
IEC Specs refer to IEC 60268,5 third sdition. All Scan Speak products are RoHS compliant
-
W W dB/W W
26,0 1,6 2,0 2,5 0,5 -
mm mm
72,0 15,0 0,5
mm mm mm mWb mWb mm mm Kg Kg
Frequency: 110,00
100,00
SPL [Hz]
90,00
80,00
70,00
60,00
50,00 10
100
1000
10000
100000
Frequency [Hz] Mechanical Dimensions:
© 2009, ScanSpeak. All rights reserved.
Updated 2009.06.16
