Transcript
1" Dome Tweeter Type Number: D2606/922000 Features:
Key features: • • • • • • • •
High Performance 1" Tweeter Front plate diameter ø104 mm Coated Silk Fabric Diaphragm Low Damping Ferrofluid Cooling with High Stability Linear response faceplate Double chamber version of D2606/920000 for lower Fs Braided tinsel leads Neutral Design
Specs: Electrical Data Nominal impedance Minimum impedance Maximum impedance DC resistance Voice coil inductance T-S Parameters Resonance Frequency Mechanical Q factor Electrical Q factor Total Q factor Force factor Mechanical resistance Moving mass Suspension compliance Effective cone diameter Effective piston area Equivalent volume Sensitivity (2.83V/1m) Ratio BL/√(Re) Ratio fs/Qts
Zn Zmin Zo Re Le
fs Qms Qes Qts Bl Rms Mms Cms D Sd Vas
6 5,4/2818 10,5 4,6 0,01
850 1,22 1,07 0,57 2,80 1,50 0,33 0,11 7,10 0,01 91,4
ohm ohm ohm ohm mH
Hz
Tm Kg/s g mm/N cm cm2 ltrs dB
Power Handling 100h RMS noice test (IEC) Long-term Max Power (IEC18.3)
50,0 80,0
W W
Voice Coil and Magnet Parametres Voice coil diameter Voice coil height Voice coil layers Height of gap Linear excursion +/Max mech. Excursion +/-
26,0 1,6 2 2,0 0,2 1,6
mm mm
Diameter of magnet Height of magnet Weight of magnet Unit net weight
72,0 15,0 0,24 0,5
mm mm Kg Kg
Notes: F
IEC Specs refer to IEC 60268,5 third sdition. All Scan Speak products are RoHS compliant
mm mm mm
Frequency: 110,00
100,00
SPL [dB]
90,00
80,00
70,00
60,00
50,00 10
100
1000
10000
100000
Frequency [Hz] Mechanical Dimensions:
© 2009, ScanSpeak. All rights reserved.
Updated 2010.06.17
