Preview only show first 10 pages with watermark. For full document please download

1.qxp (page 1)

   EMBED


Share

Transcript

Audio Mixer SRP-V200 The versatile Sony SRP -V200. Six stereo inputs, four mono inputs, four mixing buses and a full range of operational features combined in a single, compact unit. Use the parallel control port to interface with a video editing system, and the SRP -V200 provides the audio facilities for A/V post production. Audio Mixer SRP -V200 Built-in VCAs and 4-channel pre-view switching are controlled via a parallel interface, making the SRP-V200 very versatile and flexible in small to medium sized video editing systems. Four mixing-bus outputs support 4-track, A/B roll editing and a Fader Start function is available to control CD players or audio recorders. With its six stereo and four mono inputs, the SRP-V200 can also be used for A/B/C roll* editing. From recording tracks to editing the master tape, the SRP-V200 provides all the audio functions required for the complete post production process. * A/B/C roll video editing is possible by utilizing all six stereo and four mono channels of the SRP-V200 to connect the 4-track outputs from three playback VTRs and a record VTR. Main Features 1. Four mono inputs with Mic/Line A/Line B selection, six stereo line inputs and two Effect Returns. 2. 3-band equalization and a low-cut filter on each input channel. 3. External power supply (DC 48V) on the four mono input channels for direct connection of professional condenser microphones. 4. PFL (Pre Fader Listening) function for monitoring each input channel signal. 5. Fader Start function on each input channel. 6. Four-track audio A/B roll editing with VTRs. Combining the stereo and mono input channels also allows A/B/C roll editing. 7. 4-channel pre-view bus supports both fixed and free recorder assignment, and is easily configured. Four recorder modes are available: Fixed Recorder Assignment 2CH, Fixed Recorder Assignment 4CH, Free Recorder Assignment 2CH and Free Recorder Assignment 4CH. (See below chart for recorder modes.) 8. A 4 x 4 monitor matrix switcher provides total monitoring flexibility, allowing any monitor or pre-view bus to be routed to any combination of monitoring outputs. 9. Versatile control from Sony editing controllers provides full control of monitoring functions as well as audio cuts and crossfades. 10. Built-in 1 kHz oscillator for level adjustment and recording line-up tone. 11 . TB Master and TB Out buttons route the internal talk-back microphone to the Line outputs and the TB output. 12. Supplied rack mounting adaptors allow the SRP-V200 to be mounted into a 19-inch rack. 13. Optional table kit MU-200TK provides convenient desk-top operation. Recorder modes MODE CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 VTRs in Fixed NO. VTR1 VTR2 VTR3 VTR4 Recorder Mode (2CH) AUDIO CH A1-A2 A1-A2 A1-A2 A1-A2 VTRs in Fixed NO. VTR1 VTR1 VTR1 VTR1 VTR2 VTR2 VTR3 VTR3 VTR4 VTR4 Recorder Mode (4CH) AUDIO CH A1 A2 A3 A4 A1-A2 A3-A4 A1-A2 A3-A4 A1-A2 A3-A4 VTRs in Free NO. VTR1 VTR2 VTR3 VTR4 Recorder Mode (2CH) AUDIO CH A1-A2 A1-A2 A1-A2 A1-A2 VTRs in Free NO. Recorder Mode (4CH) AUDIO CH VTR1 VTR1 VTR1 VTR1 VTR2 VTR2 VTR3 VTR3 VTR4 VTR4 A1 A2 A3 A4 A1-A2 A3-A4 A1-A2 A3-A4 A1-A2 A3-A4 Block Diagram MASTER 1-4 AUX 1-4 PFL PREVIEW 1-4 CONTROL INPUT A PAN B MIC +48V MIC LCF VCA MASTER OUTPUT 1 MASTER 1 1 2 EQ LINE 3 MASTER 2 4 LEVEL AUX1/3 LOW MID HIGH INPUT B (+4dBu) 2 3/4 MASTER 3 PRE 3 600 AUX2/4 PFL PEAK MASTER 4 4 PREVIEW MUTING FADER AUX MASTER 1 AUX OUTPUT 1 LOCAL MONO INPUT 1-4 AUX MASTER 2 2 VCA L BAL 1-2 L 3 EQ -10dBu +4dBu 600 +4dBu R AUX MASTER 3 3-4 R LCF AUX MASTER 4 AUX AUX LEVEL BAL 4 LOW MIDHIGH METER 1 METER PRE 2 3 4 3-4 PFL PEAK PREVIEW MUTING FADER MONITOR SELECT LOCAL STEREO INPUT 1-6 RETUR NINPUT 1 LEVEL BAL 1-2 MONITOR OUTPUT1 1-2 3-4 2 MUTING 2 3 EDITOR 4 VCA PARALLEL INTERFACE 3-4 1-2 TALKBACK MIC EDIT TB OUT TB OUT LEVEL A1/A2 RECMODE MONITOR SOURCE 1-2 A3/A4 MONITOR PHONES 3-4 REMOTE LEVEL AUX 1 AUX 2 MONITOR SELECT AUX 3 MONITOR INPUT 1 AUX 4 2 RETURN MONI 1-2 3 MONI 3-4 4 OSC 1kHz : XLR TYPE 1-2 ON PFL EDIT 2CH : PHONE JACK PFL OUT : PHONO JACK Rear Panel 2CH Free Rec A/B/C Roll Editing System Speaker SRP-S720 (Fader start function) I/F I/F Audio Mixer CD SRP -V200 Power Amp SRP-P50 MD VTR1 Player/Recorder INPUT VTR1 VTR2 VTR3 VTR4 INPUT INPUT CH5 CH6 OUTPUT MONITOR OUT INPUT INPUT CH7 CH8 CH9 CH10 VTR2 Player/Recorder SRP-V200 MASTER OUT Audio Distribution Unit VTR3 Player/Recorder Parallel I/F (RCC-5A/11A) VTR4 Player/Recorder BVE-2000 (RS-422) 2CH Fixed Rec Editing&Small Post Pro System Speaker SRP-S720 Power Amp SRP-P50 Effector Microphones MIC INPUT AUX OUT RTN IN Pin assignment of A1/A2,A3/A4 terminal MONITOR OUT CH7 OUTPUT INPUT CD CH8 SRP-V200 INPUT INPUT CH5 MD VTR2 Player CH9 INPUT CH6 INPUT CH1(B)-CH4(B) OUTPUT MASTER OUT INPUT VTR3 Recorder Parallel I/F (RCC-5AA) PVE-500 4 Track Audio Recorder Audio Distribution Unit OUTPUT INPUT OUTPUT INPUT Pin assignment of REMOTE terminal Pin NO. A1/A2 A3/A4 1 A2-A A4-A 2-4 - - 5 A1-A A3-A 6 A1-B A3-B 7 A1-C A3-C 8 A1-D A3-D 9-13 - - 14 A2-B A4-B 15 A2-C A4-C 16 A2-D A4-D 17 - - 18 GND GND 19-25 - - VTR1 Player INPUT CH1 CH2 (RS-422) Pin assignment of VCA terminal Pin NO. FUNCTIONS 1 MONO INPUT 1 VCA CONTROL INPUT FIX 2CH MODE FIX 4CH MODE FREE 2CH/FREE 4CH MODE 2 MONO INPUT 2 VCA CONTROL INPUT 1 VCA1 VCA1 VCA1 3 MONO INPUT 3 VCA CONTROL INPUT 2 - - - 4 MONO INPUT 4 VCA CONTROL INPUT 3 VCA3 VCA3 VCA3 5 STEREO INPUT ST1 VCA CONTROL INPUT 4 - - - 6 STEREO INPUT ST2 VCA CONTROL INPUT 5 VCA5 VCA5 VCA5 7 STEREO INPUT ST3 VCA CONTROL INPUT 6 - - - 8 STEREO INPUT ST4 VCA CONTROL INPUT 7 VCA7 VCA7 VCA7 9 STEREO INPUT ST5 VCA CONTROL INPUT 8 - - - 10 STEREO INPUT ST6 VCA CONTROL INPUT 9 GND GND GND 11-12 - 10 MONITOR INPUT1 MONITOR INPUT1 - 13 GND 11 MONITOR INPUT2 MONITOR INPUT2 - 14 MONO INPUT 1 FADER START OUTPUT 12 EDITOR INDICATOR EDITOR INDICATOR EDITOR INDICATOR 15 MONO INPUT 2 FADER START OUTPUT 13 MONITOR OUTPUT1 MUTING MONITOR OUTPUT1-4 MUTING - 16 MONO INPUT 3 FADER START OUTPUT 14 MONITOR OUTPUT2 MUTING MONITOR INPUT3 - 17 MONO INPUT 4 FADER START OUTPUT 15 - MONITOR INPUT4 - 18 STEREO INPUT ST1 FADER START OUTPUT 19 STEREO INPUT ST2 FADER START OUTPUT 20 STEREO INPUT ST3 FADER START OUTPUT 21 STEREO INPUT ST4 FADER START OUTPUT 22 STEREO INPUT ST5 FADER START OUTPUT 23 STEREO INPUT ST6 FADER START OUTPUT 24 - 25 GND Pin NO. FUNCTIONS Name and function of each part 1 1 1 2 2 4 3 2 3 5 5 4 6 5 6 3 7 8 6 7 9 8 10 9 8 11 10 9 7 14 4 12 11 19 12 11 18 15 16 10 13 20 12 13 14 21 13 15 14 16 15 17 22 17 18 MONO INPUT section 16 17 STEREO INPUT section MONITOR/MASTER section 1 Input-A Level Switch 1 Input Level Switch 1 Power Switch 2 LEVEL (Input-A Level) Control 2 L,R Buttons 2 Level Meters 3 B (Input-B Selector) Button 3 LCF (Low-Cut Filter) Button 3 MONITOR SOURCE Selector Buttons 4 LCF (Low-Cut Filter) Button 4 HIGH (High Frequency Equalizer) Control 4 MONITOR Matrix Switcher Buttons 5 HIGH (High Frequency Equalizer) Control 5 MID (Mid Frequency Equalizer) Control 5 EDITOR Indicator 6 MID (Mid Frequency Equalizer) Control 6 LOW (Low Frequency Equalizer) Control 6 MONITOR OUTPUT 1-2/3-4 Controls 7 LOW (Low Frequency Equalizer) Control 7 PEAK Indicator 7 MUTING Button 8 PEAK Indicator 8 AUX BAL (AUX Output Balance) Control 8 RETURN BAL (Return Balance) Control 9 AUX 1/3 (AUX Output 1/3 Level) Control 9 AUX LVL (AUX Output Level) Control 9 RETURN LEVEL Control 10 AUX 2/4 (AUX Output 2/4 Level) Control 10 PRE (Pre-Fader) Button 10 1-2,3-4 (MASTER Output Channel Assignment) Button 11 PRE (Pre-Fader) Button 11 1-2/3-4 (AUX Output Selection) Button 11 REC MODE (Recorder Assignment) Switch 12 1-2/3-4 (AUX Output Selection) Button 12 BAL (Balance) Control 12 METER Switch 13 PAN (Pan Pot) Control 13 1-2,3-4 (MASTER Output Channel 13 OSCILLATOR Switch 14 1,2,3,4 (MASTER Output Channel Assignment) Buttons Assignment) Buttons 14 MIC 14 MUTING Button 15 LEVEL Control 15 MUTING Button 15 LOCAL Button 16 1-2 Switch 16 LOCAL Button 16 PFL (Pre-Fader Listening) Button 17 TB OUT (Talkback Output) Switch 17 PFL (Pre-Fader Listening) Button 17 Channel Fader 18 PHONES (Headphone) Jack 18 Channel Fader 19 LEVEL Control 20 PHONES Output Selector Switch 21 AUX MASTER (Aux Output) Controls 22 MASTER Faders Specifications TERMINAL No. of CH TYPE REFERENCE LEVEL MAX. LEVEL IMPEDANCE (LOAD IMPEDANCE) MONO INPUT A 4 XLR-3-31 MIC :-60 - -17dBu MIC :-35 - +8dBu MIC : More than 2kΩ LINE:-30 - +13dBU LINE:-5 - +24dBu LINE : More than 10kΩ Audio Mixer SRP -V200 MONO INOUT B 4 XLR-3-31 +4dBu +24dBu More than 10kΩ/600Ω STEREO INPUT 6 XLR-3-31 -10/+4dBu +15/+24dBu -10dBu : More than 10kΩ RETURN INPUT 2 Phono jack -10dBu +15dBu 47kΩ EXIT MONITOR IN 4 XLR-3-31 +4dBu +24dBu More than 10kΩ/600Ω MASTER OUTPUT 4 XLR-3-32 +4dBu +24dBu 100Ω (More than 600Ω) MASTER OUTPUT 4 Phono jack -5dBu +15dBu 220Ω (More than 10kΩ) MONITOR OUTPUT 4 Phono jack -5dBu +15dBu 220Ω (More than 10kΩ) AUX OUTPUT 4 Phono jack -5dBu +15dBu 220Ω (More than 10kΩ) TB OUTPUT 1 Phono jack -5dBu +15dBu 220Ω (More than 10kΩ) PFL OUTPUT 1 Phono jack -5dBu +15dBu 220Ω (More than 10kΩ) PHONES 1 ST Phone 10mW + 10mW (More than 8Ω) +4dBu : More than 10kΩ/600Ω Frequency response : 20Hz - 20kHz +0.5/-1dB (1kHz, +4dBu input, MASTER OUT +4dBu output) T.H.D : Less than 0.03% (1kHz, +4dBu input, MASTER OUT +4dBu output) E.I.N : Less than -127dBu (20Hz - 20kHz, -60dBu, 150Ω terminated) Residual noise level : Less than -95dBu (20Hz - 20kHz, master fader - ∞, MASTER OUT) Crosstalk : Between MASTER OUT, Less than -80dB (10kHz, except for stereo input) EQ : HIGH 10kHz ±15dB shelving type Less than -82dBu (20Hz - 20kHz, all assign SW on, ch fader - ∞, master fader 0, MASTER OUT) MID 2.5kHz ±15dB peaking type LOW 60Hz ±15dB peaking type Low cut filter :100Hz -12dB/oct. LED meter : 16-segment(VU response), 4CH Editor interface : Protocol(SONY standard parallel type) A1/A2 connector 25-pin D-sub female type A3/A4 connector 25-pin D-sub female type VCA connector 15-pin D-sub male type Remote connector : 25-pin D-sub female type Storage temperature : -20 - +60˚C Operating temperature : 0 - +40˚C Power requirements : 120/230V AC(Switchable), 50/60Hz Power consumption : 50W Mass: : 9.4kg Dimensions : 481(W)X140(H)X349(D)mm Not including the maximum protection Supplied accessory : Plug adaptor(1) (for some AC 120V countries) Optional accessory : Table kit MU-200TK MU-200TK Table kit (option) **Rack mount adaptor is supplied. Dimensions (unit :mm) (0dBu=0.775Vrms) 481 10 424 354.4 37 12° 349 337 274 26 130 5 56.5 ©1999 Sony Corporation. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. All non-metric mass and measures are approximate. Sony is a registered trademark of Sony Corporation. All other trademarks are property of their respective owners. 20 20 300 Distributed by MK7311V1AB99APR Printed in Japan