Transcript
ONSITE OFFERS ISSUE 40 MARCH 2015
PNEUMATIC NAILERS • DEWALT® Pneumatic Nailers are the result of years of research on the jobsite. Offering the ultimate combination of productivity, reliability and low maintenance, the new range also offers the most cost effective way to nail timber materials in a construction environment. • Wide range of stick framing, coil framing, brad finishing, flooring, staplers and compressors available. • Over 150 types of nails in the range to cater for the exact finish you need on your job. To see the full range please visit www.DEWALT.com/nailers
FRAMING NAILERS DPN9033SM • Driving up to 90mm ring shank nails in dense hardwood is no trouble for the newest Pneumatic Framing Nailer from DEWALT®. • Lightweight magnesium body ensures maximum durability and comfortable handling. • Short magazine to help you get into smaller tighter spaces.
311
€ SSP
.10
(EXC VAT)
FINISHING NAILER DPN1850
DPN1850
• For detail focussed applications, there is a full line-up of Finishing Nailers. • The oil-free 18 gauge pneumatic brad nailer offers the highest performance and reliability with minimum maintenance by eliminating need for oil replacement. • The small size and weight give the tool ideal comfort and balance to help get into small areas and awkward angles associated with finishing applications.
DPN1850
€
143
.96
SSP
(EXC VAT)
DPN9033SM
DPN1850
38-50
100
Nail Sizes
50-90mm
15-55mm
Trip Type
Sequential
Sequential
Nail Capacity
Weight
2
DPN9033SM
DPN9033SM
3.5kg
1.2kg
Operating Pressure
8.3 BAR
8.3 BAR
Operating Pressure
120 PSI
120 PSI
FOR THE LATEST INTERACTIVE NEWS DOWNLOAD THE APP
DRYWALL SCREWGUN DCF620D2K 18V XR Li-Ion Brushless Drywall Screwdriver offers extended runtime, delivering up to 2250 screws per charge. Quick release collated screw magazine accepts most collated screws for even greater productivity and helping you install boards quicker. Powerful 4400rpm BRUSHLESS motor drives screws efficiently and effectively offering maximum runtime in a compact tool.
DCF620D2K/DCF620N
DCF620D2K
Voltage
18V
Battery Capacity
2Ah
Max Torque
5-30Nm
Power Output
0 - 4400rpm
Tool Holder
2,250 Timber stud 1,450 Metal stud
Weight
335mm
Length
380mm
Height
233mm
.78
(EXC VAT)
Exclusively compatible with the DEWALT® XR Drywall Screwdriver, the new PR2 screwdriver bit offers ideal geometry for drywall screws to further improve productivity. Supplied with the DCF620D2K.
1.9kg
Head Length
181
€ SSP
PR2 SCREWDRIVER BIT DT7205
(Hex) 6.35mm
Screws / Charge
.78
(EXC VAT)
435W
No Load Speed
364
€ SSP
DCF620N
Available as a two battery kit and as a bare unit
DRYWALL SCREWS Available in coarse and fine threads for both wood and metal profiles, the comprehensive range of collated drywall screws from DEWALT® come in a variety of sizes and are the ideal companion for the new DCF620. The addition of black phosphate makes them especially hard wearing and resistant to corrosion.
13
€ SSP
.91
(EXC VAT)
SKU Code
Description
Box Qty
DWF4000250
25mm x 3.5mm Fine thread
1000
DWF4000350
35mm x 3.5mm Fine thread
1000
DWF4000450
45mm x 3.5mm Fine thread
1000
DWF4000550
55mm x 3.5mm Fine thread
1000
DWF4100350
35mm x 3.5mm Coarse thread
1000
DWF4100450
45mm x 3.5mm Coarse thread
1000
DWF4100550
55mm x 3.5mm Coarse thread
1000
Price indicates DWF4100350
TO SEE THE NOISE AND VIBRATION DATA VISIT WWW.DEWALT.CO.UK/SAFETY
3
CORDLESS MULTI-TOOL VERSATILE, POWERFUL & RESPONSIVE • 300 watt motor provides faster completion of the most demanding tasks • Rubber over mould – ergonomic handle design enables comfortable use over extended periods • Responsive Trigger and Variable speed control allows for a simple soft start function, and complete application control
DCS355M2/D2 Power Output
300 W
Voltage
18V
Runtime
2.0Ah or 4.0Ah
Speed
0-20,000 opm
Weight
1.46kg (2.0Ah) 1.68kg (4.0Ah)
DCS355M2
445
€ SSP
.30
(EXC VAT)
DCS355D2
359
€ SSP
.90
(EXC VAT)
IT'S NOT JUST ONE TOOL...IT'S ALL OF THEM
Clean cuts on skirting or drywall
4
Clean grout removal
Cutting heavy fabrics & flooring
Cutting construction timber
Preparing surfaces
Detail sanding
Scraping Adhesives
Pipe cutting
FOR THE LATEST INTERACTIVE NEWS DOWNLOAD THE APP
DCF899P2 HIGH TORQUE IMPACT WRENCH • Latest generation 18V BRUSHLESS XR Li-Ion High Torque Wrench featuring XR 5Ah Li-Ion battery technology • Powerful fan cooled motor delivers up to 950Nm of torque and 2400 impacts per minute for heavy duty fastening applications • 3 speed and torque settings gives you the control to best suit your needs
DCF899P2
€ SSP
413
.58
(EXC VAT)
DCF899P2 Battery
XR Li-Ion
Voltage
18V
Max Torque
950Nm
Breakaway Torque
1625Nm
Power Output
610 Watt
No Load Speed
0 - 400 / 1200 /1900 rpm
Impacts per Minute
0 - 2400 ipm
Weight
3.3 kg
DCR006
DCR006 BLUETOOTH SPEAKER
71
€
With all the durability you’d expect from a DEWALT® product, this compact speaker also boasts the ability to stream audio from your devices via Bluetooth from a range of up to 30.5m. Delivering quality sound and powered by your existing batteries, there’s no better site companion.
SSP
.98
(EXC VAT)
DCR006
DCR002
DCR002
€ SSP
35
.38
DCR002 BLUETOOTH ADAPTOR The adapter is available for connection to either DAB or non-DAB digital radios featuring a 3.5mm auxiliary jack, including in-car systems and DeWALT’s full range of portable radios. With a single top-mounted button for added convenience, the unit can be paired quickly and easily to any portable audio player, tablet or smartphone with Bluetooth capability, thereby providing instantly streamed sound.
(EXC VAT)
TO SEE THE NOISE AND VIBRATION DATA VISIT WWW.DEWALT.CO.UK/SAFETY
5
115MM GRINDER Extremely lightweight with an ergonomic body, the much improved, high performing range of compact angle grinders from DEWALT® provide the user with optimal tool balance. In addition to this, the cooler operating temperature ensures these tools can be used for longer before overheating, preserving the life of the motor.
DWE4206 Power
DWE4206K
1010W
1010W
11000rpm
11000rpm
Slide
Slide
115mm
115mm
Spindle Thread
M14
M14
Weight
2.2kg
2.2kg
No
Yes
No Load Speed Switch Type Max. Disc Diameter
Includes Kit box
DWE4206
€ SSP
67
.10
(EXC VAT)
DWE4206K
79
€ SSP
.30
(EXC VAT)
EXTREME GRINDING AND CUTTING DISCS Extreme grinding and cutting discs provide market leading performance through their: • Higher grain content – greater density • Industrial grade grain – longer working life • Range of diameters – for cutting and grinding all material types
DWE305PK
DWE305PK
No Load Stroke Rate
(EXC VAT)
Max. Cutting Capacity [Wood]
280mm
Max. Cutting Capacity [Steel Sections & Pipes]
100mm
Max. Cutting Capacity [PVC]
130mm
.38
Stroke Length DWE305PK
DWE305PK RECIP SAW With its industrial design, improved gearbox, and powerful 1100W 0W motor, this tool is designed to withstand the toughest of environments. It also benefits from a four position blade clamp, delivering versatility and flush cutting, no matter how demanding the task.
6
1100W
157
€ SSP
Power
Weight
0-2800spm 29mm
3.5kg
Length
435mm
Height
178mm
FOR THE LATEST INTERACTIVE NEWS DOWNLOAD THE APP
THE COMPLETE SOLUTION FROM START TO FINISH SDS PLUS HAMMERS • Lightweight – ranging from 2.5 to 3.1kg, including side handle, this improved range allows the user to benefit from reduced arm strain • Convenient – the reversible brush ring provides equal power in forward and reverse, making it easy to remove trapped accessories • Durable – the tough outer shell and recessed mode selector ensure improved product longevity
D25033K
D25133K
D25134K
710W
800W
800W
Drilling modes
3
3
3
Quick Change Chuck
No
No
Yes
Impact energy (EPTA 05/2009)
2J
2.6J
2.8J
22mm
26mm
26mm
13.6m/s²
15.4m/s²
15.7m/s²
Power Input
Max. Drilling Capacity [Concrete] Vibration
D25033K
€ SSP
132 (EXC VAT)
.98
D25133K
€ SSP
169
.58
(EXC VAT)
D25134K
206
€ SSP
.18
(EXC VAT)
EXTREME SDS-PLUS™ CONCRETE DRILL BITS APPLICATIONS ø 3.5-30mm • Suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. FEATURES • The innovative EXTREME DEWALT® 2 SDS+ drill bit is amongst the very best in terms of its durability, drilling life and speed. • The Superior carbide grade ensures a tip with outstanding durability which gives consistent drilling life. • The NEW 4 FLUTE SPIRAL incorporates a maximised central core for increased durability and energy transmission. • The 140° tip design ensures better bit penetration and longer life. • Hardened Steel body for extra strength and reduced breakage.
ANCHORS AND FASTENINGS From chemical to mechanical, light to heavy duty, the range of DEWALT® anchors have been tested to extremes to ensure the highest quality, safety and security in the most demanding environments. Coupled with a full range of European Technical Approvals and Fire Safety certificates makes DEWALT® the best choice for your construction site. For the full range please visit www.DEWALT.co.uk/fastenings
TO SEE THE NOISE AND VIBRATION DATA VISIT WWW.DEWALT.CO.UK/SAFETY
7
1 BATTERY BRUSHLESS DEALS 18V XR LI-ION 4AH BRUSHLESS COMPACT COMBI DRILL DCD795M1 Kit contains the following: • DCD795 Brushless Compact Combi • 1 x 4.0Ah Slide Pack Battery • Multi-voltage Charger • Heavy Duty Kit Box
€
189
.10
SSP
(EXC VAT)
18V XR LI-ION 2AH BRUSHLESS OSCILLATING TOOL DCS355D1 Kit contains the following: • DCS355 Oscillating Tool • 1 x 4.0Ah Slide Pack Battery • Multi-voltage Charger • TSTAK Compatible Kit Box
€ SSP
225
.70
(EXC VAT) 8
FOR THE LATEST INTERACTIVE NEWS DOWNLOAD THE APP
5AH BRUSHLESS DEALS 18V XR LI-ION 5AH BRUSHLESS PREMIUM TWIN KIT DCK255P2 + DT70543T
FREE
+
Kit contains the following: • DCD995 Brushless XRP 3 Speed Combi • DCF886 Brushless Impact Driver • 2 x 5.0Ah Slide Pack Batteries • Multi-voltage charger • DS150 Tough System™ Kit Box
€ SSP
567
34 PC IMPACT TORSION SCREWDRIVING SET & MAGNETIC BIT TIP HOLDER
2
.30
(EXC VAT)
FREE
18V XR LI-ION 5AH BRUSHLESS COMPACT TWIN KIT
34 PC IMPACT TORSION SCREWDRIVING SET & MAGNETIC BIT TIP HOLDER
+
DCK250P2 + DT70543T Kit contains the following: • DCD795 Brushless 2 Speed Combi • DCF886 Brushless Impact Driver • 2 x 5.0Ah Slide Pack Batteries • Multi-voltage Charger •DS150 Tough System™ Kit Box
€ SSP
2
511
.18
(EXC VAT)
18V XR LI-ION 5AH BRUSHLESS XRP COMBI DRILL
LED TORCH €53* FREE XRWORTH
DCD995P2 + DCL040 Kit contains the following: • DCD995 Brushless XRP 3 Speed Combi • 2 x 5.0Ah XR Slide Pack Batteries • Multi-voltage Charger • Multi Position Side Handle • TSTAK compatible Kit Box
€ SSP
462 (EXC VAT)
*While stocks last.
.38
2
+
18V XR LI-ION 5AH BRUSHLESS COMPACT COMBI DRILL DCD795P2 Kit contains the following: • DCD795 Brushless Compact 2 Speed Combi • 2 x 5.0Ah Slide Pack Batteries • Multi-voltage Charger • TSTAK compatible Kit Box
€ SSP
413
.58
2
(EXC VAT)
9
5AH BRUSHLESS DEALS 18V XR LI-ION 5AH BRUSHLESS FRAMING NAILER DCN692P2 Kit contains the following: • DCN692 Brushless 2 Speed Framing Nailer • 2 x 5.0Ah Slide Pack Batteries • Multi-voltage Charger • Heavy Duty Kit Box
€ SSP
2
730
10
128 (EXC VAT)
Kit contains the following: • DCD995 Brushless XRP 3 Speed Combi • DCF886 Brushless Impact Driver • DCS391 Circular Saw • DCG412 Grinder • DCS331 Jigsaw • DCL040 LED Pivot Torch • 3 x 5.0Ah Slide Pack Batteries • Multi-voltage Charger • 2 x DS300 Tough System Kit Boxes
1096
.78
(EXC VAT)
Compatible with all DEWALT® XR Li-Ion 18V Tools LED State of Charge Indicator helps manage pack charging
SSP
18V XR LI-ION 5AH BRUSHLESS PREMIUM 6 KIT DCK694P3
SSP
DCB184
€
.78
(EXC VAT)
€
18V XR LI-ION 5AH BATTERY
3
.10
FOR THE LATEST INTERACTIVE NEWS DOWNLOAD THE APP
4AH BRUSHLESS DEALS 18V XR LI-ION 4AH BRUSHLESS COMPACT TWIN KIT
18V XR LI-ION 4AH BRUSHLESS IMPACT DRIVER
DCK250M2 + DCB090
DCF895M2 + DT70543T
Kit contains the following: • DCD795 Brushless Compact 2 Speed Combi • DCF886 Brushless Impact Driver • 2 x 4.0Ah Slide Pack Batteries • Multi-voltage charger • DS150 Tough System™ Kit Box
Kit contains the following: • DCD895 Brushless 3 Speed Impact Driver • 2 x 4.0Ah Slide Pack Batteries • Multi-voltage Charger • Heavy Duty Kit Box
FREE
2
2
FREE
XR USB CHARGER WORTH €35*
34 PC IMPACT TORSION SCREWDRIVING SET & MAGNETIC BIT TIP HOLDER
+ + € SSP
481
€
.90
SSP
(EXC VAT)
372
.10
(EXC VAT)
18V XR LI-ION 4AH BRUSHLESS OSCILLATING TOOL DCS355M2 + DT20715
FREE
5 PIECE OSCILLATING ACCESSORY KIT WORTH €53*
+
Kit contains the following: • DCS355 Brushless Oscillating Tool • 2 x 4.0Ah Slide Pack Batteries • Multi-voltage Charger • Depth stop, extraction adaptor and 35 accessories • TSTAK complatible Kit Box
€ SSP
445
.30
2
(EXC VAT)
*While stocks last.
11
XR CORDLESS DEALS 10.8V XR LI-ION 2AH TWIN KIT DCK211D2T Kit contains the following: • DCD710 Drill Driver • DCF815 Impact Driver • 2 x 2.0Ah Slide Pack Batteries • Multi-voltage Charger • Clear Lid TSTAK Kit Box
€ SSP
206
.18
2
(EXC VAT)
18V XR LI-ION 4AH 3 MODE SDS HAMMER DRILL
ACCESSORY FREE SDS KITS WORTH €21*
DCH253M2 + 2 X DT9702 Kit contains the following: • DCH253 3 Mode SDS Hammer Drill • 2 x 4.0Ah Slide Pack Batteries • Multi-voltage Charger • Multi Position Side Handle • Heavy Duty Kit Box
€ SSP
437
.98
2
+
(EXC VAT)
18V XR LI-ION 4AH 6 KIT DCK691M3 Kit contains the following: • DCD785 Compact 2 Speed Combi • DCF885 Impact Driver • DCS391 Circular Saw • DCG412 Grinder • DCS331 Jigsaw • DCL040 LED Pivot Torch • 3 x 4.0Ah Slide Pack Batteries • Multi-voltage Charger • 2 X DS300 Tough System Kit Boxes
€ SSP
974
.78
3
(EXC VAT)
12
*While stocks last.
FOR THE LATEST INTERACTIVE NEWS DOWNLOAD THE APP
CONSTRUCTION DEALS 710 WATT 22MM SDS HAMMER DRILL D25033K
800 WATT 26MM SDS HAMMER DRILL D25133K
• Ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 22 mm in diameter • Rotation-stop for light chiselling applications in brick, soft masonry and occasionally concrete • Impact-stop for drilling in wood, steel, ceramic and screwdriving applications • Mechanical clutch eliminates sudden high-torque reaction should the bit jam
• Ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26 mm in diameter • Rotation-stop for light chiselling applications in brick, soft masonry and occasionally concrete • Impact-stop for drilling in wood, steel, ceramic and screwdriving applications • Mechanical clutch eliminates sudden high-torque reaction should the bit jam • Ergonomic rubber coated back handle design for improved comfort in use
€ SSP
120
.78
€ SSP
(EXC VAT)
145
.18
(EXC VAT)
1100 WATT RECIPROCATING SAW DWE305PK
10 KILO SDS MAX DEMOLITION HAMMER D25899K
• 1100 Watt motor designed for heavy duty applications • 4 position blade clamp allows for flush cutting and increased versatility • Lever-action keyless blade clamp for quick and easy blade changing • Ideal for plumbers, electricians, heating, HVAC, and builders
Powerful and durable 1500 Watt motor delivers outstanding concrete breaking performance • In line design for better handling and quick change chisel adjustment allows fast orientation of the chisel through 12 preset positions • Large oversize hammer mechanism delivers extreme durability and excellent concrete breaking performance • Multi adjustable side handle can be located anywhere on the hammer barrel, maintaining user comfort in any application
€ SSP
120
.78
(EXC VAT)
€ SSP
608
.78
(EXC VAT)
13
WOODWORKING DEALS 2000 WATT 1/2" PLUNGE ROUTER DW625EK
1050 WATT 4MM PLANER D26500K
• Electronic speed control ensures that the same fine finish is achieved in all grades of timber • Soft start to eliminate small initial movements that might misalign the cutter, especially important with such a powerful router • Routing depth setting with fine adjustment and magnified scale for simple setting • 3 stage depth stop adjustment enables recesses of various depths to be machined in one operation without time consuming setting up
• Front handle depth control in clearly marked 0.1 mm steps for accurate setting with positive indexing • A large planer blade drum rotating at high speed provides an excellent finish • 3 chamfering grooves in the front shoe simplify precision fitting jobs • Left and right chip ejection for convenience
€ SSP
315
€
.98
SSP
(EXC VAT)
242
.78
(EXC VAT)
BISCUIT JOINTER DW682K + DT1306
1/4 SHEET ORBITAL PALM SANDER D26441
• Rack and pinion control provides precise vertical adjustment and fence alignment • Pre-set cutting depths for 0, 10 and 20 biscuit sizes with additional fine adjustment for ultimate accuracy • Grooving setting with up to 20 mm depth of cut gives increased versatility • Spindle lock mechanism for quick and easy blade changes with a single spanner
• 230 Watt motor sands at 14,000 orbits per minute, providing a superior finish • Hook & loop platen allows faster paper change, better dust extraction and increase sanding efficiency • Paper clamps provided for conventional abrasives • Sealed 100% ball-bearing construction provides longer life
BLADE WORTH €35* FREE SPARE
+ € SSP
254
.98
(EXC VAT)
14
€ SSP
71
.98
(EXC VAT)
*While stocks last.
FOR THE LATEST INTERACTIVE NEWS DOWNLOAD THE APP
MACHINERY DEALS 216MM COMPACT SLIDE MITRE SAW
250MM SLIDE COMPOUND MITRE SAW WITH XPS
DW777 + D26441
DWS717XPS + DE7033
• Built on classic pull saw design improved and updated for the modern user • 1800 Watt motor provides outstanding cutting performance up to 265 x 62mm • Integrated positive mitre stops at 15°, 22.5°, 30°, 45°, quick release mitre mechanism up to 50° • Outstanding dust control and deflection away from cutting area • Supplied with TCT blade, blade allen keys and material clamp
The ultimate all rounder for capacity and accuracy • 1675 Watt motor provides outstanding cutting performance up to 302 x 88mm / 320 x 76mm • XPS Shadow cut line system for increased productivity • Quick release bevel setting provides accurate and simple setting of bevel angles up to 48° left and right • Outstanding dust control and deflection away from cutting area • Supplied with TCT blade, blade spanner, dust bag and material clamp
WORTH €71* FREE SANDER
FREE DE7033
+
+ TM
CROSS CUT POSITIONING SYSTEM
€ SSP
396
€
.50
SSP
(EXC VAT)
823
.50
(EXC VAT)
305MM SLIDE COMPOUND MITRE SAW WITH XPS DWS780 + DWE576K OR DE7023 The number 1 choice for first fix professionals • 1675 Watt motor provides outstanding cutting performance up to 303 x 110mm / 245 x 76mm • XPS Shadow cut line system for increased productivity • Cam action mitre lock function makes mitre setting faster and easier allowing the user to quickly adjust angles between 0° - 50° left and 0° - 60° right • Outstanding dust control and deflection away from cutting area • Supplied with TCT blade, blade spanner, dust bag and material clamp
FREE +
OR
DWE576K OR DE7023
€ SSP
TM
CROSS CUT POSITIONING SYSTEM
*While stocks last.
1018
.70
(EXC VAT)
15
WIN A VIP EXPERIENCE AUSTIN, TEXAS
AUSTIN, TEXAS
USA
YOUR VIP MOTOGP™ AUSTIN PRIZE WEEKEND FOR YOU AND A GUEST WILL INCLUDE: · RETURN FLIGHTS · TOURIST GUEST PASSES FOR 5 KEY AUSTIN ATTRACTIONS · VIP VILLAGE MOTOGP™ HOSPITALITY · FULL WEEKEND PADDOCK PASSES AND GRANDSTAND SEATS
To enter simply buy any DEWALT product between April and November this year and register at the MyDEWALT community for your chance to win.
UK 210 Bath Road, Slough, Berkshire SL1 3YD Telephone: 01753 567055 FAX: 01753 572112
Your DEWALT® Dealer:
The yellow and black colour scheme is used on DEWALT® Power Tools and Accessories as a trademark. DEWALT® reserves the right to change any deal at any time without notice. Deals available while stocks last. SDS-Plus™ is a registered trademarks of Robert Bosch GmbH.
Be the first to see product news and special offers from DEWALT... Register at MYDEWALT to be sent onsite offers by email. Simply go to www.DEWALT.com/MYDEWALT
MP17119-IE
MY
