Preview only show first 10 pages with watermark. For full document please download

2002-2007 Gsx 1300r Hayabusa

   EMBED

Share

Transcript

2002-2007 Suzuki GSX1300R I n s ta l l a t i o n I n s t r u c t i o n s Parts List 1 Power Commander 1 CD-ROM 1 Button Adjustment Display USB Cable 1 Installation Guide 1 Power Adapter 2 Power Commander Decals 2 Dynojet Decals 2 Velcro ® 1 Strip Alcohol Swab Faceplate Buttons Expansion Port USB Port The ignition MUST be turned OFF before installation! You can also download the Power Commander software and latest maps from our web site at: www.powercommander.com PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com i312-411 www.powercommander.com 2002-2007 Hayabusa - PCIII USB - 1 1 Remove the main seat and the 2 Hold the front of the fuel tank passenger seat. up using the prop rod located Fig. A in the trunk area. 3 Locate the connector from the main wiring harness to the injector rail and uplug this connector (Fig. A). Unplug this connector NOTE: This connector is white in color. Stock connectors 4 Plug the connectors from the PCIII in-line of the stock Fig. B wiring harness (Fig. B). PCIII connectors 5 Route the PCIII wiring along the inside of the frame towards the battery. Fig. C 6 i312-411 Ground wire from PCIII www.powercommander.com Attach the ground wire from the PCIII to the negative side of the battery (Fig. C). 2002-2007 Hayabusa - PCIII USB - 2 7 Install the PCIII in the rear section of the trunk using the supplied velcro (Fig. D). Make sure to clean both surfaces with Fig. D alcohol first. i312-411 www.powercommander.com 2002-2007 Hayabusa - PCIII USB - 3