Transcript
2002 FORD F-150 Crew Cab
Year: 2002
Make: Ford
Model: F-Series
IN-DASH APPLICATION: Dash Type: DIN and half Harness: FD16/FDK9 Kit: FD1325 Antenna Adapter: Standard Motorola FRONT SPEAKERS: LowerDoor: 6x8" speaker mounted to factory metal When installing an aftermarket 6x8", no speaker adapter is needed. REAR SPEAKERS: Rear Door: 6x8" speaker mounted to factory metal. When installing an aftermarket 6x8" speaker, no adapter is needed. WIRE COLOR CODES: +12V Constant +12V Accessory Switched -12V Chassis Ground +12V Illumination +12V Dimmer Amp Remote LF+ LFRF+ RFLR+ LRRR+ RR-
= = = = = = = = = = = = = =
Green/Purple Black/Pink Black/Green Blue/Red Black Orange/Green Blue/White White/Green Green/Orange Grey/Blue Brown/Yellow Orange/Red Brown/Pink
NOTE: THIS MANUAL IS BASED ON CAREFULLY DOCUMENTED RESEARCH.ABSOLUTE ACCURACY IS ATTEMPTED BUT NOT GUARANTEED. USE THIS MANUAL AS A REFERENCE GUIDE. SCOSCHE, INC. CANNOT BE RESPONSIBLE FOR INCONSISTENCIES THAT MAY OCCUR..
© 2000 SCOSCHE INDUSTRIES, INC. 155
ALL RIGHTS RESERVED FOR MORE INFORMATION VISIT www.scosche.com OR CALL SCOSCHE INDUSTRIES, INC. AT 800-363-4490
2002 Ford F-150 Crew Cab Truck PRELIMINARY: Disconnect the negative battery cable. ANTENNA: Front passenger side fender. RADIO REMOVAL AND IN-DASH INSTALLATION: Note: The factory radio provision is for a Ford Double DIN size radio. When installing an aftermarket head unit, a dash installation kit is needed. We recommend the Scosche FD1325 dash installation kit. 1. Carefully pry out radio trim panel using fingers. 2. Using Ford radio removal tools (Scosche DT-1) remove radio. FRONT DOOR SPEAKER INSTALLATION: Note: The factory speaker provision is for a 6"x 8" ford speaker speaker 1. Carefully pry out door opener trim starting from the front of the panel. 2. Locate and extract (1) Philips head screw from behind door opener trim. 3. Carefully pry power window/door lock switchpanel from the front, unplug and remove. 4. Locate and extract (1) 7mm head screw from behind in panel. 5. Extract (2) Philips head screws from lower portion of the door panel 6. Slide panel up, unplug door light, and remove panel 7. Extract (4) ¼” head screws securing speaker, disconnect and remove. REAR SPEAKER INSTALLATION: Note: The factory speaker provision is for a 6"x 8" ford speaker speaker 1. Carefully pry out door opener trim starting from the front of the panel. 2. Locate and extract (1) Philips head screw from behind in door opener trim. 3. Carefully pry power window switch panel from the front, unplug and remove. 4. Locate and extract (1) 7mm head screw from behind in panel. 5. Pry off upper panel located behind window 6. Locate and extract (1) Philips head screw from behind upper panel 7. Extract (2) Philips head screws from lower portion of the door panel 8. Slide panel up, unplug door light, and remove panel 9. Extract (4) ¼” head screws securing speaker, disconnect and remove.
NOTE: THIS MANUAL IS BASED ON CAREFULLY DOCUMENTED RESEARCH. ABSOLUTE ACCURA CY IS ATTEMPTED BUT NOT GUARANTEED. USE THIS MANUAL AS A REFERENCE GUIDE. SCOSCHE, INC. CANNOT BE RESPONSIBLE FOR INCONSISTENCIES THAT MAY OCCUR..
156
© 2000 SCOSCHE INDUSTRIES, INC.
ALL RIGHTS RESERVED FOR MORE INFORMATION VISIT www.scosche.com OR CALL SCOSCHE INDUSTRIES, INC. AT 800-363-4490
