Transcript
AV DISTRIBUTION & SURROUND SOUND C AT 5 B a l a n c e d Vi d e o R e c e i v e r
CNX-PBVR4 CAT5 Balanced Video Receiver Input Level: 1 VP-P nominal Connect to unbalanced inputs on CNX-PVID8X3/4 24VDC: (1) 2.1 mm barrel DC power jack 24 Volt DC power input (PW-2410RU power supply included) Controls & LED Indicators PWR: (1) green LED, indicates 24 Volts DC power supplied from power supply VIDEO INPUT COMP A – D: (4) groups of (3) screwdriveradjustable pots for CAT5 video input compensation Power Requirements
av distribution & surround
24 Watts (1 Amp) @ 24 Volts DC PW-2410RU power supply included
The CNX-PBVR4 is designed for use with CNX-PVID8X3 and CNX-PVID8X4 video distribution switchers to enable redistribution of video return signals from up to four CNXRMCLV or C2N-DAP8RC room solution boxes. The CNX-PBVR4 installs at the head end to convert the CAT5 return signals to standard RCA unbalanced, allowing each signal to be connected to any available input on the switcher so that it may be distributed to any other room as if it were another head end source.
Environmental Temperature: 41° to 113°F (5° to 45°C) Humidity: 10% to 90% RH (non-condensing) Enclosure Black metal, 1U 19-inch rack-mountable (rack ears included)
Typical CNX-PBVR4 Connections
The CNX-PBVR4 is designed for transparent operation and contains no switching circuitry. Video compensation adjustments are included to maximize the performance of video over CAT5. The CNX-PBVR4 includes a dedicated external power supply and requires no connection to the Cresnet control network.
SPECIFICATIONS Vi d e o Signal Types: Component (YPBPR), S-Video (Y/C), or composite video; digital audio Video/HDTV Formats: 480i (NTSC), 576i (PAL), 480p, 576p, 720p, 1080i Digital Audio Format: S/PDIF coaxial Bandwidth: 50MHz (CAT5) per pair Crosstalk: -60dB Connectors VIDEO INPUT A – D: (4) 8-pin RJ45 female, shielded CAT5 balanced video input ports Input Impedance: 100 ohms per pair Connect to CNXRMCLV, C2N-DAP8RC, or any “CH” CAT5 video output ports* VIDEO OUTPUT A – D: (16) RCA female comprising (4) component/S-Video/composite video outputs and (4) digital audio outputs; Output Impedance: 75 ohms
494 www.crestron.com | 800.237.2041 | 201.767.3400 © 2007 Specifications subject to change without notice
AV DISTRIBUTION & SURROUND SOUND C AT 5 B a l a n c e d Vi d e o R e c e i v e r CAT5 Balanced Video Receiver
CNX-PBVR4
Dimensions Height: 1.7 in (4.32 cm) Width: 17.03 in (43.24 cm), 19.0 in (48.26 cm) with rack ears Depth: 6.67 in (16.94 cm) We i g h t 2.88 lbs (1.29 kg)
INCLUDED ACCESSORIES PW-2410RU Power Supply *Maximum CAT5 distance: 500 feet for component, 750 feet for composite and S-Video
av distribution & surround
Rear View
495 www.crestron.com | 800.237.2041 | 201.767.3400 © 2007 Specifications subject to change without notice
AV DISTRIBUTION & SURROUND SOUND Room Solution Boxes
CNXRMC Room Solution Box For most applications using the CNXRMC, the accompanying audio signal is distributed to room loudspeakers using a Crestron audio distribution processor and amplifier. However, a digital audio signal can be supported by the CNXRMC when fed from a CNX-PVID8X4 switcher.
av distribution & surround
To maximize the performance of video over CAT5, Crestron employs adjustable video compensation on each of the three video pairs. The fourth pair, which is uncompensated, is optimized for digital audio but may also be suitable for composite video.
Crestron room solution boxes are designed to provide a convenient one-box signal interface solution for the connection and control of local room AV devices as part of a complete Crestron Home® AV distribution system. The CNXRMC is specifically designed as a CAT5 video receiver and control interface, providing baseband outputs for composite, S-Video, and high-definition component video signals, plus a variety of IR and serial control ports. The compact CNXRMC normally installs at the display device (television, plasma, etc.) location and connects to the head end by just one CAT5E cable and one Cresnet cable (available as CresCAT®, sold separately). Crestron’s CAT5 video distribution technology permits cable lengths up to 750 feet (500 feet for component video). Crestron room solution boxes are designed to provide maximum flexibility through the use of CAT5 balanced technology. The CAT5 video input port on the CNXRMC receives up to four simultaneous signals based upon the selected head end source. For instance, a component signal utilizes the first, second, and third pairs to transmit the Y, PB, and PR components. Switching to an S-Video signal then utilizes just the first and second pairs to transmit S-Video’s Y and C components. Composite utilizes only the first CAT5 pair. The fourth pair is ordinarily intended for digital audio. Used with the CNX-PVID8X3 or CNX-PVID8X4 video distribution switchers, the CNXRMC automatically routes the incoming video signals to the appropriate inputs on the display device allowing the viewer to select any head end video source using a touchpanel, keypad, or handheld remote. Operation is transparent to the end-user with all switching occurring smoothly under the command of the control system.
Control ports on the CNXRMC include four IR/serial ports and one bi-directional RS-232 port, providing a powerful interface for control of numerous devices including video projectors, plasma displays, televisions, VCRs, DVD players, and more. A single digital input port is also provided to support the optional CNXRMCS TV current sensor, or any low-voltage contact closure device. The CNXRMC functions as a slave device to any 2-Series control system communicating via the Cresnet control network. Any of Crestron’s touchpanels, keypads, and handheld remotes may be used to provide the user interface to control the CNXRMC and all connected devices. Adding an optional CNXRMIRD IR receiver affords cost-effective control from any Crestron or third-party universal IR remote.
CAT5 video receiver and control interface Composite, S-Video, and HDTV/component outputs Digital audio output (requires CNX-PVID8X4) 1) RS-232 and 4) IR control ports Optional current sensor Optional IR remote receiver Single-cable hookup using CresCAT wire Supports 1080i HDTV up to 500 feet Adjustable video compensation
SPECIFICATIONS Vi d e o & D i g i t a l A u d i o Signal Types: Component (YPBPR), S-Video (Y/C), or composite video; digital audio Video/HDTV Formats: 480i (NTSC), 576i (PAL), 480p, 576p, 720p, 1080i Digital Audio Format: S/PDIF coaxial Bandwidth: 42MHz (CAT5) per pair Crosstalk: <-60dB
496 www.crestron.com | 800.237.2041 | 201.767.3400 © 2007 Specifications subject to change without notice
AV DISTRIBUTION & SURROUND SOUND Room Solution Boxes Room Solution Box
CNXRMC
Connectors
Enclosure
VIDEO IN: (1) 8-pin RJ45 female, shielded CAT5 balanced video input port Input Impedance: 100 ohms per pair Connects to CNX-PVID8X3/4 or any “CH” CAT5 video output port*
Black metal, surface mount box with (2) integral mounting flanges Dimensions Height: 1.94 in (4.93 cm) Width: 7.48 in (19.00 cm) Depth: 5.22 in (13.26 cm)
VIDEO OUT A – F: (6) RCA female comprising (1) composite, (1) S-Video, and (1) HDTV/component video outputs; Output Impedance: 75 ohms Output Level: 1 VP-P nominal Connects to video inputs of local display device
We i g h t 1.17 lbs (0.53 kg)
VIDEO OUT G: (1) RCA female, coaxial digital audio output Output Impedance: 75 ohms Output Level: 1 VP-P nominal Connects to digital audio input of local audio device
*Maximum CAT5 Distance: 500 feet for component, 750 feet for composite and S-Video
Typical CNXRMC Connections
IR IN: (1) 3.5 mm TRS mini-phone female For connection of the CNXRMIRD IR receiver (sold separately) Allows IR wireless control from Crestron or third-party remotes using RC-5 IR commands IR OUT A – D: (4) 3.5mm mini-phone female, IR/Serial output ports IR output up to 1.2 MHz 1-way serial TTL/RS-232 (0-5 Volts DC) up to 9600 baud Connect to STIRP IR probes (sold separately) SENS: (1) 2-pin 3.5mm detachable terminal block, digital input port Connects to CNXRMCS current sensor (sold separately) or contact closure NET: (1) 4-pin 3.5mm detachable terminal block Cresnet slave port, connects to Cresnet control network Controls & LED Indicators VIDEO INPUT COMP 1 – 3: (3) screwdriver-adjustable pots for CAT5 video input compensation PWR: (1) green LED, indicates 24 Volts DC power supplied from Cresnet control network NET: (1) yellow LED, indicates communication with Cresnet system SETUP: (1) recessed miniature pushbutton and (1) red LED, used for touch-settable ID (TSID)
av distribution & surround
RS-232: (1) 6-pin RJ11 female Bidirectional RS-232 COM port and computer console port Up to 115.2k baud, RTS/CTS hardware handshaking
Power Requirements Cresnet Power Usage: 6 Watts (0.25 Amps @ 24 Volts DC) Environmental Temperature: 41° to 122°F (5° to 50°C) Humidity: 10% to 90% RH (non-condensing)
AVAILABLE ACCESSORIES CNXRMCS
STIRP
Current Sensor
IR Probe
CNXRMIRD
ST-SPL
IR Receiver
IR Splitter
ST-MB “Master-Blaster” IR Sprayer
STCP-501 DB9M to RJ11 Adapter
ST-XX Custom Serial Interface Cable
CresCAT Crestron Home® Cable
497 www.crestron.com | 800.237.2041 | 201.767.3400 © 2007 Specifications subject to change without notice
AV DISTRIBUTION & SURROUND SOUND Room Solution Boxes
av distribution & surround
CNXRMCLV
Enhanced Room Solution Box The CNXRMCLV includes a built-in 8 X 8 video matrix switcher, accepting inputs from the four CAT5 pairs plus four local unbalanced inputs, all routed to up to eight local unbalanced outputs. Used with the CNX-PVID8X3 or CNX-PVID8X4 video distribution switchers, the CNXRMCLV automatically routes the incoming CAT5 video signals to the appropriate inputs on the local display device allowing the viewer to select any head end video source using a touchpanel, keypad, or handheld remote. In addition, the four local inputs may be used to accept video signals (typically composite or S-Video) from local AV devices (VCR, DVD, etc.) Source selection is transparent to the end-user with all switching occurring smoothly under the command of the control system.
Crestron room solution boxes are designed to provide a convenient one-box signal interface solution for the connection and control of local room AV devices as part of a complete Crestron Home® AV distribution system. The CNXRMCLV packs a ton of functionality, serving as a bidirectional CAT5 video and audio interface, matrix switcher, stereo preamp, and control module. Numerous inputs and outputs are provided to support composite, S-Video, and high-definition component video, stereo audio, and IR and serial device control. The CNXRMCLV can be installed at the display device (television, plasma, etc.) or local AV equipment location, connected to the head end by a single Cresnet cable and up to three CAT5E cables (available as CresCAT®Q, sold separately). Crestron’s CAT5 video distribution technology permits cable lengths up to 750 feet (500 feet for component video). Crestron room solution boxes are designed to provide maximum flexibility through the use of CAT5 balanced technology. The CAT5 video input port on the CNXRMCLV receives up to four simultaneous signals based upon the selected head end source. For instance, a component signal utilizes the first, second, and third pairs of the CAT5 cable to transmit the Y, PB, and PR components. Switching to an S-Video signal then utilizes just the first and second pairs to transmit S-Video’s Y and C components. Composite utilizes only the first CAT5 pair. The fourth pair is ordinarily intended for digital audio. To maximize the performance of video over CAT5, Crestron employs adjustable video compensation on each of the three CAT5 video input pairs. The fourth pair, which is uncompensated, is optimized for digital audio but may also be suitable for composite video.
Built-in video signal sensing is included on each local input to report the presence of video signals to the control system, providing verification of device power status and enabling auto-switching capability. In addition to video, the CNXRMCLV also includes a CAT5 audio port to receive stereo audio from a CNX-BIPAD8 audio distribution processor at the head end. The audio switcher built into the CNXRMCLV allows selection between the head end CAT5 signal and three local stereo inputs. A built-in stereo preamp provides control over volume, bass, treble, balance, loudness, mono, and mute using any touchpanel, keypad, or handheld remote. The preamp output may be connected to a line-level input on the local television, or used to drive a local room amplifier such as the CNAMPX-2X60. A second unprocessed output fed by its own independent switcher is provided to feed a local recording device or secondary zone. Routing of digital audio signals can also be supported by the CNXRMCLV when fed from a CNX-PVID8X4 switcher. The digital audio signal is received on the fourth pair of the CAT5 video input, passing through the CNXRMCLV’s internal video matrix to a local RCA output for connection to the S/PDIF coaxial input of any local device. Local digital audio sources may also be connected to any of the CNXRMCLV’s RCA video inputs. Note that digital audio signals are not converted or processed by the CNXRMCLV’s audio preamp. The CNXRMCLV also supports a “return” feed to allow the audio and video signals from local AV sources to be routed to the head-end for redistribution to other rooms. The analog audio return is handled over the same CAT5E cable that carries the analog audio signal coming from the head end, while a dedicated CAT5E cable is required to enable the video and digital audio return.
498 www.crestron.com | 800.237.2041 | 201.767.3400 © 2007 Specifications subject to change without notice
AV DISTRIBUTION & SURROUND SOUND Room Solution Boxes Enhanced Room Solution Box Control ports on the CNXRMCLV include four IR/serial ports and one bi-directional RS-232 port, providing a powerful interface for control of numerous devices including video projectors, plasma displays, televisions, VCRs, DVD players, and more. A single digital input port is also provided to support the optional CNXRMCS TV current sensor, or any low-voltage contact closure device.
CAT5 audio & video receiver and control interface Composite, S-Video, and HDTV/component outputs Digital audio output (requires CNX-PVID8X4) Up to 4 video and 3 stereo audio inputs for local AV sources Integrated stereo preamp | independent record out CAT5 balanced audio and video returns — share local sources with other rooms
Built-in video signal sensing 1) RS-232 and 4) IR control ports Optional current sensor Optional IR remote receiver Single-cable hookup using CresCAT-Q wire Supports 1080i HDTV up to 500 feet Adjustable video compensation Controllable via Cresnet communications
SPECIFICATIONS Vi d e o & D i g i t a l A u d i o Signal Types: Component (YPBPR), S-Video (Y/C), or composite video; digital audio Video/HDTV Formats: 480i (NTSC), 576i (PAL), 480p, 576p, 720p, 1080i Digital Audio Format: S/PDIF coaxial Bandwidth: 70MHz (unbalanced); 47MHz (CAT5) per pair Crosstalk: <-60dB Audio Controls: Volume, Balance, Bass, Treble, Loudness, Mute, Mono Volume Gain Range: -80dB to +20dB, 1 dB steps Mute: -100dB Bass Gain Range: ±12dB Treble Gain Range: ±12dB S/N Ratio: >100dB THD+N: <0.02%
Connectors VIDEO IN: (1) 8-pin RJ45 female, shielded CAT5 balanced video input port Input Impedance: 100 ohms per pair Connects to CNX-PVID8X3/4 or any “CH” CAT5 video output port* VIDEO OUT: (1) 8-pin RJ45 female, shielded CAT5 balanced video output port Output Impedance: 100 ohms per pair Connects to CNX-PBVR4 or any “CH” CAT5 video input port* AUDIO: (1) 8-pin RJ45 female, shielded Bi-directional CAT5 balanced audio port Maximum Input/Output Levels: 4 VRMS Input/Output Impedances: 600 ohms Connects to CNX-BIPAD8, CNX-PBAR4, or any “CH” CAT5 audio port* VIDEO IN 5 – 8: (4) RCA female comprising up to (4) video or digital audio inputs; Input Impedance: 75 ohms Input Level: 1 VP-P nominal Signal Detection Threshold: 0.25 VP-P Connect to video/digital audio outputs of local source devices VIDEO OUT A – H: (8) RCA female comprising up to (8) video or digital audio outputs; Output Impedance: 75 ohms Output Level: 1 VP-P nominal Connect to video/digital audio inputs of local display/amplifier devices; Note: Outputs E – H function in parallel with the CAT5 VIDEO OUT port AUDIO IN A – C: (6) RCA female comprising (3) unbalanced stereo line-level audio inputs; Maximum Input Level: 3.2 VRMS Input Impedance: 10k ohms Connect to audio outputs of local source devices AUDIO OUT: (2) RCA female Unbalanced stereo line-level audio output (variable level/tone) Maximum Output Level: 2.5 VRMS Output Impedance: 10 ohms Connects to audio inputs of local CNAMPX-2X60 room amplifier
av distribution & surround
The CNXRMCLV functions as a slave device to any 2-Series control system communicating via the Cresnet control network. Any of Crestron’s touchpanels, keypads, and handheld remotes may be used to provide the user interface to control the CNXRMCLV and all connected devices. Adding an optional CNXRMIRD IR receiver affords cost-effective control from any Crestron or third-party universal IR remote.
CNXRMCLV
REC OUT: (2) RCA female Unbalanced stereo line-level audio output (fixed level/tone) Maximum Output Level: 2.5 VRMS Output Impedance: 10 ohms Connects to audio inputs of local recording device, AV receiver, or TV RS-232: (1) 6-pin RJ11 female Bidirectional RS-232 COM port and computer console port Up to 115.2k baud, RTS/CTS hardware handshaking IR IN: (1) 3.5 mm TRS mini-phone female For connection of the CNXRMIRD IR receiver (sold separately) Allows IR wireless control from Crestron or third-party remotes using RC-5 IR commands
> continued
499 www.crestron.com | 800.237.2041 | 201.767.3400 © 2007 Specifications subject to change without notice
AV DISTRIBUTION & SURROUND SOUND Room Solution Boxes
CNXRMCLV
Enhanced Room Solution Box (continued)
IR OUT A – D: (4) 3.5mm mini-phone female, IR/Serial output ports IR output up to 1.2 MHz 1-way serial TTL/RS-232 (0-5 Volts DC) up to 9600 baud Connect to STIRP IR probes (sold separately)
Typical CNXRMCLV Connections
SENS: (1) 2-pin 3.5mm detachable terminal block TTL level digital input port, 5 Volts DC, 2k ohms pull-up resistor Connects to CNXRMCS current sensor (sold separately) or contact closure NET: (1) 4-pin 3.5mm detachable terminal block Cresnet slave port, connects to Cresnet control network
av distribution & surround
Controls & LED Indicators VIDEO INPUT COMP 1 – 3: (3) screwdriver-adjustable pots for CAT5 video input compensation PWR: (1) green LED, indicates 24 Volts DC power supplied from Cresnet control network NET: (1) yellow LED, indicates communication with Cresnet system SETUP: (1) recessed miniature pushbutton and (1) red LED, used for touch-settable ID (TSID) Power Requirements Cresnet Power Usage: 12 Watts (0.5 Amps @ 24 Volts DC) Environmental Temperature: 41° to 122°F (5° to 50°C) Humidity: 10% to 90% RH (non-condensing) Enclosure Black metal, surface mount box with (2) integral mounting flanges Dimensions Height: 1.94 in (4.93 cm) Width: 11.60 in (29.46 cm) Depth: 7.22 in (18.34 cm) We i g h t 2.31 lbs (1.05 kg) *Maximum CAT5 distance: 500 feet for component, 750 feet for composite and S-Video, 1000 feet for audio
AVAILABLE ACCESSORIES CNXRMCS Current Sensor
CNXRMIRD IR Receiver
STIRP IR Probe
ST-SPL IR Splitter
ST-MB “Master-Blaster” IR Sprayer
STCP-501 DB9M to RJ11 Adapter
ST-XX Custom Serial Interface Cable
CNAMPX-2X60 2-Channel Room Amplifier
CresCAT-Q Crestron Home® Cable
500 www.crestron.com | 800.237.2041 | 201.767.3400 © 2007 Specifications subject to change without notice
