Transcript
PST-S2 Chassis Stand for POS application Features The PST-S2 chassis POS stand, housing ready for Mini-ITX form factor is specially designed for POS VARs. It is built-in 12V/ 24VDC-to-ATX power regulator module (60W/ 120W), 4 ports USB 2.0 Hub and 60W/ 150W power adapter. This inherent flexibility permits integrators/ VARs to quickly and easily design as customers demand.
Specification Chassis Form Factor
Option Mini-ITX form factor, 170 x 170 mm
Application
POS Application
Dimension (mm)
259.97 (L) x 242.83 (W) x 341.34 (H)
Power Regulator Module
60 W 12VDC-to-ATX
120W 24VDC-to-ATX
Power Adapter
60 W (110/220VAC to 12VDC)
150 W (110/220VAC to 24VDC)
Button
Power Button, Reset Button
Mounting Standard
VESA standard mounting holes for 15” or 17” LCD monitor
System (Option) Processor
Intel® ATOM™ D510 1.66GHz processor, FSB 667MHz
BIOS
Award 16Mb SPI BIOS
System Chipset/ Graphic
Intel D510 + ICH8M system Chipset / Integrated D510 Graphic
System Memory
2 x DDRII 667 SO-DIMM SDRAM, upgradable to 4GB
HDD (Storage)
2 x SATA, 1 x EIDE 1 x RJ45, 1 x RJ11, Realtek 8111E GBE 10/100/ 1000 Mbps
I/O Ports
1 x VGA
4 x RS232 (2 X DB9 1 x RJ50, 1 x RS232/422/485)
1 x LVDS
2 x PS/2 (1 x Keyboard, 1 x Mouse)
8 x USB 2.0 (4 Rear, 4 on board) 1 x Audio Jack Power / Consumption
1 x mini PCI (Expansion) with USB
12V DC-IN (4 DIN connector); 40W (typ) power consumption
Mechanical Drawing
* All specifications and photos are subject to change without notice. Digimore Electronics Co., Ltd
990701. V.1
10 Fl., No. 61, Yan-Ping S. Rd., Taipei 100, Taiwan TEL: +886 2 2311 3299 FAX: +886 2 2311 3375 Email:
[email protected] http://www.digimore.com.tw
