Transcript
JET CITY AMPLIFICATION was founded in 2009 by three experts in the music industry and is headquartered in Seattle. Jet City Amplification products deliver the utmost in pure, all-tube tone, from shimmering clean to thick ‘n raunchy, while being affordable enough for musicians slugging out a living on the small stage. All amplifiers offered in this series, outside the PicoValve (designed by Andy Marshall of THD), were designed by the legendary Mike Soldano and respect his philosophy of creating high-quality instruments that are easy to use. Each amplifier is meticulously hand-built and rigorously tested, ensuring 100% legit tone, and unflinching reliability.
Amplifiers 2011
Welcome to Jet City
WELCOME TO
JET CITY
www.jetcityamplification.com
3
Amplifier Heads 2011
Welcome to Jet City
Channels 1 5W/2.5W Power Selector, Preamp Gain, Controls Bass, Middle, Treble, Bright Switch, and Master Volume Stock Tubes
2x 12AX7 Preamp 1x 6L6 Power
EL34, 6L6, 5881, KT88, 6550, 5881, 6V6, Compatible EL84 (with adaptor)…see manual for Power Tubes exhaustive list. Rectifier Solid state
Cabinetry Perforated, cold-rolled steel
Chassis 16 gauge, cold-rolled steel
5W/2.5W into 4, 8 or Output Power 16-ohm speaker outputs
Input Power
Multi-tapped power transformer at 120v/220v and standard IEC connector
Dimensions 6.5”H x 7”D x 12.5”W
Weight 21 lbs net
www.jetcityamplification.com
PicoValve
Designed by Andy Marshall and licensed by THD Electronics, PicoValve is our compact, low-wattage tone machine. With dual 12AX7s shaping the preamp voicing, and a single 6L6 in the power section, this caged monster is the real deal. From touchsensitive and punchy cleans, to beefy, heavy rock tones, the PicoValve will get you the tone you want without tearing the paint off the walls. What’s more, you can custom tailor your Pico by swapping the power tube with nearly any octal-based tube, and there’s no re-biasing necessary. Looking to complete the package? The Pico mates perfectly with the JCA12XS for a handsome and compact micro-stack. 5
Channels 1
Controls
Tubes
Preamp Gain, Bass, Middle, Treble, Master, Presence 3x 12AX7 Preamp 2x EL84 Power
Rectifier Solid State
Cabinetry Void-free plywood
Chassis 16 gauge, cold-rolled steel
Output Power
JCA20H
Pure, simple, and full of tube tone, JCA20H delivers from a single-channel amp with absolutely no gimmick features to dilute the all-tube signal path. Elegance of design both inside and out deliver unflinching reliability in an amp good-looking enough to make a girlfriend jealous. With full EQ control and separate Preamp and Master volumes, JCA20H can deliver spanky cleans through crunchy overdrive. Amplifier Heads 2011
20 watts into 16-ohm or 2x 8-ohm speaker outputs
Multi-tapped power transformer Input Power at 100v/120v/220v/240v and standard IEC connector Dimensions 9”H x 9”D x 19.5”W
Weight 21.3 lbs net
Welcome to Jet City
DESIGN BY
soldano
www.jetcityamplification.com
7
Channels 2 - Crunch and Overdrive (foot-switchable) Crunch Gain, Overdrive Gain, Bass, Middle, Controls Treble, Crunch Master, Overdrive Master, Presence Effects Loop Tube-Buffered, serial
Tubes
5x 12AX7 Preamp 2x EL84 Power
Rectifier Solid State Footswitch Single button - Crunch/Overdrive (included) channel selection Cabinetry Void-free plywood
Chassis 16 gauge, cold-rolled steel
JCA22H
You asked for it, and here it is! We took the legendary JCA20H and added a second, footswitch-accessible overdrive channel, along with a tube-buffered, serial effects loop. Poised to change the amp world…again, the JCA22H is elegance in design both inside and out, delivering unflinching reliability and everything you’d want in an amp. With full EQ control and separate preamp gain and master volumes, the JCA22H can deliver spanky cleans all the way through saturated, Soldano high-gain overdrive. Amplifier Heads 2011
Output Power
20 watts into 16-ohm or 2x 8-ohm speaker outputs
Multi-tapped power transformer Input Power at 100v/120v/220v/240v and standard IEC connector Dimensions 9”H x 9”D x 19.5”W
Weight 21.3 lbs net
Welcome to Jet City
Normal Gain, Overdrive Gain, Bass, Middle, Controls Treble, Normal Master, Overdrive Master, Presence
Tubes
5x 12AX7 Preamp 2x 6L6 Power
Rectifier Solid state Footswitch Single button - Normal/Overdrive (included) channel selection Cabinetry Void-free plywood
soldano
Effects Loop Tube-Buffered, serial
DESIGN BY
Channels 2 - Normal and Overdrive (foot-switchable)
Chassis 16 gauge, cold-rolled steel
Output Power
50 watts into single 4-ohm, parallel 8-ohm or parallel 16-ohm speaker outputs
Multi-tapped power transformer Input Power at 100v/120v/220v/240v and standard IEC connector Dimensions 9.5”H x 9.5”D x 25”W
Weight 40 lbs net
www.jetcityamplification.com
JCA50H
50 watts from a pair of 6L6 power tubes and all the features of our JCA100H makes our JCA50H ideal for gigging musicians who need plenty of stage volume with some nice power amp distortion. The Normal channel can range from clean tones to dirty rock riffs. The Overdrive channel is THE Soldano high-gain lead tone. Pair it up with our JCA48S for a powerful half-stack, or one or two of our JCA24S 2×12 cabs for extra versatility.
9
soldano DESIGN BY Amplifier Heads 2011
Welcome to Jet City
Channels 2 - Normal and Overdrive (foot-switchable) Normal Gain, Overdrive Gain, Bass, Middle, Controls Treble, Normal Master, Overdrive Master, Presence Effects Loop Tube-Buffered, serial
Tubes
5x 12AX7 Preamp 4x 6L6 Power
Rectifier Solid State Footswitch Single button - Normal/Overdrive (included) channel selection Cabinetry Void-free plywood
Chassis 16 gauge, cold-rolled steel
Output Power
100 watts into single 4-ohm, parallel 8-ohm or parallel 16-ohm speaker outputs
Multi-tapped power transformer Input Power at 100v/120v/220v/240v and standard IEC connector Dimensions 9.5”H x 9.5”D x 25”W
Weight 43.6 lbs net
www.jetcityamplification.com
JCA100H
With two channels of Soldano tone and 100 watts of pure tube power, this amp was made for the big stage. The Normal channel has plenty of headroom to deliver clear, bright clean tones and can be driven hard enough to get downright raunchy. The Overdrive channel is the circuit that made Soldano famous. It’s been modeled and imitated, but this is the real-effing-high-gain-deal.
11
Channels 2 - Normal and Overdrive (foot-switchable) Normal Gain, Overdrive Gain, Bass, Middle, Controls Treble, Normal Master, Overdrive Master, Presence, Depth, 100W/50W Effects Loop Tube-Buffered, serial
Tubes
5x 12AX7 Preamp 4x 6L6 Power
Rectifier Solid State
JCA100HDM
Our new flagship is based on our popular JCA100H – two channels of Soldano tone and 100 watts of pure tube power. The Crunch channel has plenty of headroom to deliver clear, bright clean tones and can be driven hard enough to get downright raunchy. The Overdrive channel is the circuit that made Soldano famous. The HDM version also includes the famous Soldano Depth Control, and a metal front baffle, standard. The 100W/50W brings the pain from four 6L6 output tubes in 100W mode, or in 50W, two tubes are turned off, causing the power section to work harder to reach the desired output level, resulting in some pretty hot power amp distortion. Rounding out the feature set is the wire-mounted blue LED, just because it looks cool. This LED is socket mounted so it can be replaced with other colors, a daisy-chain of several LEDs, or removed entirely. Amplifier Heads 2011
Footswitch Single button - Crunch/Overdrive (included) channel selection Cabinetry Void-free plywood
Chassis 16 gauge, cold-rolled steel
Output Power
100/50 watts into single 4-ohm, parallel 8-ohm or parallel 16-ohm speaker outputs
Multi-tapped power transformer Input Power at 100v/120v/220v/240v and standard IEC connector Dimensions 9.5”H x 9.5”D x 25”W
Weight 43.6 lbs net
Welcome to Jet City
DESIGN BY
soldano
www.jetcityamplification.com
13
Channels 1
Controls
Preamp Gain, Bass, Middle, Treble, Master, Presence
3x 12AX7 Preamp Tubes 2x 12AX7 Reverb 2x EL84 Power Rectifier Solid State
Cabinetry Void-free plywood
Chassis 16 gauge, cold-rolled steel
Output Power
20 watts into 16-ohm or 2x 8-ohm speaker outputs
Multi-tapped power transformer Input Power at 100v/120v/220v/240v and standard IEC connector
JCA2112RC
JCA2112RC is a combo of our JCA20H and JCA12S, with tubedriven reverb included. Easy-access speaker connectors on the rear panel allow JCA2112RC to drive external cabinets either with or without the internal Jet City Eminence Custom driver. Stacked on an additional JCA12S, the speaker volume doubles and the added height brings the controls to arm’s length in a small club. Amplifier Combos 2011
Driver
1x 12” Jet City Custom Eminence Driver at 100 watts RMS
Dimensions 20”H x 21”D x 11”W
Weight 38.7 lbs net
Welcome to Jet City
DESIGN BY
Channels 2 - Crunch and Overdrive (foot-switchable)
soldano
Crunch Gain, Overdrive Gain, Bass, Middle, Controls Treble, Crunch Master, Overdrive Master, Presence Effects Loop Tube-buffered, serial Tubes
5x 12AX7 Preamp 2x EL84 Power
Rectifier Solid State Footswitch Single button - Normal/Overdrive (included) channel selection Cabinetry Void-free plywood Chassis 16 gauge, cold-rolled steel Output Power
20 watts into 16-ohm or 2x 8-ohm speaker outputs
Multi-tapped power transformer Input Power at 100v/120v/220v/240v and standard IEC connector 1x 12” Jet City Custom Eminence Driver Driver at 100 watts RMS Dimensions 20”H x 21”D x 11”W Weight 38.7 lbs net www.jetcityamplification.com
JCA2212C
A combo version of our JCA22H, it’s the complete package, with two foot-switchable channels and crazy tube tone that ranges from clean and jangly, to full-on Soldano high gain. Easy-access speaker connectors on the rear panel allow JCA2212 to drive external cabinets either with or without the internal Jet City Eminence Custom driver. Stacked on an additional JCA12S, the speaker volume doubles and the added height brings the controls to arm’s length in a small club. 15
Channels 2 - Normal and Overdrive (foot-switchable) Normal Gain, Overdrive Gain, Bass, Middle, Controls Treble, Normal Master, Overdrive Master, Presence Effects Loop Tube-buffered, serial Tubes
5x 12AX7 Preamp 2x 6L6 Power
Rectifier Solid State Footswitch Single Button - Normal/Overdrive (included) channel selection Cabinetry Void-free Plywood Chassis 16 gauge, cold-rolled steel Output Power
JCA5012C
The JCA5012 is the combo version of our JCA50H. It gives you 50 watts from a pair of 6L6 power tubes and all the features of our JCA100H. It’s ideal for gigging musicians who need plenty of stage volume with some nice power amp distortion. The Normal channel can range from clean tones to dirty rock riffs. The Overdrive channel is THE Soldano high-gain lead tone. Pair it up with our JCA48S or JCA12S for extra versatility. Amplifier Combos 2011
50 watts into 16-ohm or 2x 8-ohm speaker outputs
Multi-tapped power transformer Input Power at 100v/120v/220v/240v and standard IEC connector Driver
1x 12” Jet City Custom Eminence Driver at 100 watts RMS
Dimensions 9.5”H x 9.5”D x 25”W Weight 40 lbs net Welcome to Jet City
DESIGN BY
Channels 2 - Clean and Crunch (foot-switchable)
soldano
Clean: Volume, Bass, Middle, Treble. Crunch: Controls Gain, Bass, Middle, Treble, Crunch Master. Global: Presence and foot-switchable Reverb. Effects Loop Tube-buffered, serial Tubes
6x 12AX7 Preamp 2x 6L6 Power
Rectifier Solid State Footswitch 2-button - Normal/Overdrive channel (included) selection plus Reverb on/off Cabinetry Void-free Plywood Chassis 16 gauge, cold-rolled steel Output Power
50 watts into 4-ohm or 8-ohm speaker outputs
Multi-tapped power transformer Input Power at 100v/120v/220v/240v and standard IEC connector Driver
1x 12” Jet City Custom Eminence Driver at 100 watts RMS
Dimensions 22”H x 28”D x 12”W Weight 45 lbs net www.jetcityamplification.com
JCA5212RC
The JCA5212RC is an all-original Soldano design for Jet City Amplification. Soldano’s “Crunch” circuit is featured here again – a preamp capable of a wide range of character – from clean and bright to muscular and powerful. And our top-of-the-line combo also includes Soldano’s “Clean” circuit – previously only available in the Soldano Lucky 13, the Clean channel is wideopen with no gain control. Each channel also has a dedicated EQ, for added tonal versatility. There are a few more tubes here, too – both the 3-spring reverb and the effects loop are tube-driven for rich, warm effects. And like all Soldano designs, it’s all about the purity of tone in 5212 again – not a mini-switch, pull-pot, or other secret-sauce knob will be found anywhere on this amp. 17
JCA12XS
Cabinet 1x12”
The JCA12XS uses the same 100-watt, custom Eminence driver as the 12S, 24S and 48S cabinets, but conveys more of a midrange “growl” thanks to its compact footprint. With its matching perforation pattern and mini badge, it’s the perfect companion for the 5-watt PicoValve, but is fully capable of cranked, 100-watt operation. A convertible rear panel allows you to operate the 12XS in half-open or closed-back configuration, so “tuning for the room” is as simple as removing 3 screws.
JCA12S
Cabinet 1x12”
With a Jet City Custom Eminence driver and a single input, the JCA12S is our straightforward tone box. Use it as the foundation of a 20 watt half stack with JCA20H or even in a full stack configuration. It’s also the same dimensions as our JCA2112RC so stack them up for increased speaker volume. Inputs 1× 16-ohm, ¼” Power Handling 100 watt RMS Cabinetry Void-free plywood Driver 1× 12” Jet City Custom Eminence Driver Dimensions 14”H x 14” W x 7”D Weight 18 lbs net Amplifier Cabinets 2011
Inputs 1× 16-ohm Power Handling 100 watt RMS Cabinetry Void-free plywood Driver 1× 12” Jet City Custom Eminence Driver Dimensions 20”H x 21” W x 11”D Weight 26.6 lbs net Welcome to Jet City
JCA48S
Cabinet 4x12”
This is the same design as Soldano’s signature 4×12, and we’ve loaded it with Jet City Custom Eminence Drivers and added switchable mono/ stereo operation. JCA20H sounds big and mean when it moves a lot of air through this cabinet, but pair it with JCA100H and really experience what a high-gain half stack can do.
JCA24S
Cabinet 2x12”
A pair of Jet City Custom Eminence drivers and switchable mono/ stereo input jacks gives JCA24S speaker volume and connection options together in one package. JCA24S is a good mate for any of the Jet City heads. Move the feet and stand it up on one end to make a great looking rig which also brings the controls of your JCA20H within easy reach.
Inputs Power Handling
1x 8ohm for mono or 2x 16ohm for stereo operation 200 watts RMS mono or 100 watts RMS per channel for stereo operation
Cabinetry Void-free plywood Drivers 2× 12” Jet City Custom Eminence Drivers Dimensions 20”H x 28” W x 12”D Weight 40.2 lbs net www.jetcityamplification.com
Inputs (1) 16-ohm - ¼” mono, (2) 8-ohm - ¼” stereo Power Handling
400 watts RMS mono or 200 watts RMS per channel for stereo operation
Cabinetry Void-free plywood Drivers 4× 12” Jet City Custom Eminence Drivers Dimensions 28”H x 28” W x 14”D Weight 69.5 lbs net 19
JCA24S+
Cabinet 2x12”
The JCA24S+ takes our tried and true 24S a step beyond, with THD porting and an integrated Jet Direct – speaker-emulated output box designed by Doug Roberts of Roberts Retrovalve. Mic the custom-voiced Eminence drivers traditionally or take the Jet Direct’s simulated “mic’d speaker” output directly to the board via XLR. The 24S+ has a ¼” Thru output that allows you to power a second cabinet in parallel, a convertible back baffle that allows for closed or partially open-back operation and switchable mono/stereo operation.
JCA12S+
Cabinet 1x12”
The JCA12S+ takes our tried and true 12S a step beyond, with THD porting and an integrated Jet Direct – speaker-emulated output box, designed by Doug Roberts of Roberts Retrovalve. Mic the custom-voiced Eminence driver traditionally or take the Jet Direct’s simulated “mic’d speaker” output directly to the board via XLR. The 12S+ has a ¼” Thru output that allows you to power a second cabinet in parallel, AND a convertible back baffle that allows for closed or partially open-back operation. Inputs 1× 16ohm ¼” Direct Output 1x XLR speaker-mulated Line Level Thru Output 1x ¼” Parallel 16ohm Speaker Level Power Handling 100 watt RMS Cabinetry Void-Free Plywood Drivers 1× 12” Jet City Custom Eminence Driver Dimensions 20”H x 21” W x 11”D Weight 26.6 lbs net Amplifier Cabinets 2011
Inputs Outputs Power Handling
1× 8ohm ¼” for mono or 2x 16ohm ¼” for stereo operation 1x 16ohm ¼” Thru (speaker level) output 1x XLR speaker-emulated (line level) output 200 watt RMS or 100 watt RMS per channel for stereo operation
Cabinetry Void-free plywood Drivers 2x 12” Jet City Custom Eminence Drivers Dimensions 20”H x 28”W x 12” D Weight 40.2 lbs net Welcome to Jet City
JCA48S+
Cabinet 4x12”
The JCA48S+ takes Soldano’s signature 4×12 a step beyond with an integrated Jet Direct speaker-emulated output box, designed by Doug Roberts of Roberts Retrovalve. Mic the custom-voiced Eminence drivers traditionally or take the simulated “mic’d speaker” output directly to the board via XLR. The 48S+ has a ¼” Thru output that allows you to power a second cabinet in parallel and switchable mono/stereo operation.
JCA48ST
Cabinet 4x12”
This is the same design as Soldano’s signature 4×12 cabinet. We’ve loaded it with Jet City Custom Eminence Drivers and added switchable mono/stereo operation. JCA48ST has a straight front, so you can pair it with JCA48S+ for a full stack, or use it on its own for a modern-looking half stack.
Inputs Outputs Power Handling
(1) 16-ohm - ¼” mono (2) 8-ohm - ¼” stereo 1x 16ohm ¼” Thru (speaker level) output 1x XLR speaker-emulated (line level) output 400 watt RMS mono or 200 watt RMS per channel for stereo operation
Cabinetry Void-free plywood Drivers 4x 12” Jet City Custom Eminence Drivers Dimensions 28”H x 28”W x 14” D Weight 69.5 lbs net www.jetcityamplification.com
Inputs
Power Handling
(1) 16-ohm - ¼” mono (2) 8-ohm - ¼” stereo 400 watt RMS mono or 200 watt RMS per channel for stereo operation
Cabinetry Void-free plywood Drivers 4x 12” Jet City Custom Eminence Drivers Dimensions 28”H x 28”W x 14” D Weight 69.5 lbs net 21
JetStream ISO12
The JetStream ISO12 from is a great solution for a variety of applications. Wanna CRANK your tube amp in a home recording environment? Need to manage your stage volume and feed the mains in a club? We turned to our allies at EMINENCE SPEAKER for their expertise in this great new product. Eminence designed this ISOLATION cab to our specifications, and handled the super-smart stuff in the acoustic design too. Then we loaded it with our Custom Eminence Jet City 12” driver. Plug your tube amp into the speaker input, and set up your amp tone – go ahead and turn it up! Clip in your favorite guitar-recording mic and position it how you prefer. Then close up the JetStream’s front door, greatly reducing the sound level in the room. Connect the ISO12’s XLR output to a recording workstation and capture screaming amp tones without waking the neighbors, or send it to the front-of-house PA system for a cranked amp quality at a controlled listening level.
Inputs 1× 16ohm, ¼” Outputs 1× XLR – microphone-level Power Handling 100 watt RMS Cabinetry Void-free plywood Drivers 1× 12” Jet City Custom Eminence Driver Dimensions 34”H x 18” W x 18”D Weight 55 lbs net Amplifier Cabinets 2011
Welcome to Jet City
Input 1x ¼” input Output 1x ¼” output Control
Independent control of Overdrive and “Afterburner” boost stage
True Bypass Will not “suck” the tone from your rig Operation Volume Control Adjusts the overall output level
Tone Control Adjusts the overall tone
Overdrive Control Adjusts the amount of OD for the first stage
Boost Control Adjusts the level of the second stage
On/Off Switch Engages/bypasses the pedal
Boost Switch Engages/bypasses the 2nd OD stage On/Off and For high visibility on the darkest stage Boost LEDs Aluminum and Strength and durability for the gigging pro Steel Housing Power Supply 9V Adapter or battery powered
www.jetcityamplification.com
AFTERBURNER The Afterburner is a two stage overdrive in a road-ready, aluminum and steel housing. The first stage is a straight-up overdrive for adding gain to the front-end of a tube amp. The second stage is a gain boost to increase saturation and sustain for solos, etc.
23
Input 1x ¼” Output 1x ¼” True Bypass Will not “suck” the tone from your rig Operation Gain Control Adjusts the amount of gain applied to the signal Tone Control Adjusts the overall tone Volume Control Adjusts the distorted signal’s overall output level On/Off Switch Engages/bypasses the pedal On/Off and For high visibility on the darkest stage Boost LEDs Aluminum and Strength and durability for the gigging pro Steel Housing Power Supply 9V Adapter or battery powered
SHOCKWAVE DISTORTION
The Shockwave is a full-on, raucous-yet-refined distortion pedal, suited for use with nearly any amp. With tones ranging from lower-gain “British” crunch, to a riff-inspiring, full-blown saturation, this box is a must-have for the serious and versatile guitarist. Apply it to a clean amp setting and the Shockwave adds a “lead channel” to your single-channel amplifier, complete with a separate tone control. Amplifier Pedals & Boxes 2011
Welcome to Jet City
GUITARSLINGER OVERDRIVE
The GuitarSlinger Overdrive, designed by international guitar hero Alex Beyrodt, was previously only available through GuitarSlinger’s one-at-a-time, hand-built operation. This truly boutique pedal is capable of pushing your amp’s clean channel into a fat crunch, or distorted channel into a heavy lead distortion. The additional bright switch adds high-frequency clarity and definition.
Input 1x ¼” Output 1x ¼” Gain Control Adjusts the amount of gain applied to the signal Volume Control Adjusts the distorted signal’s overall output level On/Off Switch Engages/bypasses the pedal On/Off LED For high visibility on the darkest stage Aluminum and Strength and durability for the gigging pro Steel Housing Power Supply 9V Adapter or battery powered www.jetcityamplification.com
25
GUITARSLINGER HIGH-GAIN BOOST
The GuitarSlinger High Gain Boost, designed by international guitar hero Alex Beyrodt, was previously only available through GuitarSlinger’s one-at-a-time, hand-built operation. This truely boutique pedal will give your amp’s distorted lead tone more gain saturation, and the boost feature will allow you to cut through the mix handily during solos.
Input 1x ¼” Output 1x ¼” Gain Control Adjusts the amount of gain applied to the signal Volume Control Adjusts the distorted signal’s overall output level On/Off Switch Engages/bypasses the pedal On/Off LED For high visibility on the darkest stage Aluminum and Strength and durability for the gigging pro Steel Housing Power Supply 9V Adapter or battery powered Amplifier Pedals & Boxes 2011
Welcome to Jet City
JHS A/B BOOST
We partnered with JHS Pedals to develop this unique and powerful hybrid. The JHS A/B Boost allows dual amp players to switch amps on the fly, with the added flexibility of an adjustable boost for cutting through the mix when needed. Just like that, we doubled the available voices in your 2-amp rig, and we did it in a streamlined, 2-button, 1-knob footswitch.
Input 1x ¼” Output 1x ¼” Boost Knob For adjusting the boost output level A/B Switch For switching between A and B outputs Boost Switch For engaging/disengaging the boost circuit A/B and Boost For high visibility on the darkest stage LEDs Aluminum and Strength and durability for the gigging pro Steel Housing Power Supply 9V Adapter or battery powered www.jetcityamplification.com
27
JHS BOOST OVERDRIVE Another JHS/Jet City collaboration that yielded an absolute dream box for the single-channel amp player. Add just the right amount of gain to the front end of your amp with the adjustable “drive” control and set your output level for solos and additional power tube break-up.
Input 1x ¼” Output 2x ¼” Drive Knob
For adjusting the amount of overdrive applied to the signal
Volume Knob For adjusting the output volume On/Off Switch Engages/bypasses the pedal On/Off LED For high visibility on the darkest stage Aluminum and Strength and durability for the gigging pro Steel Housing Power Supply 9V Adapter or battery powered Amplifier Pedals & Boxes 2011
Welcome to Jet City
FLOOD–ANALOG DELAY
We set out to create the most affordable and best sounding analog delay on the planet, and this was the result. Introducing The Flood, Analog Delay. It’s a straight-forward stomp-box with the controls you need, in a layout that’s easy to tweak on the fly. With 550 milliseconds of delay at your disposal, you can take the Flood anywhere from a simple slap back delay to a full-on swirling chaos of noise and everywhere in between.
Input 1x ¼” Output 1x ¼” Time Knob Adjust the time between delay repetitions Repeats Knob Adjust the amount of delay repetitions that occur Level Knob
Adjusts the amount of delay applied to the original signal
On/Off Switch Engages/bypasses the pedal On/Off LED For high visibility on the darkest stage Aluminum and Strength and durability for the gigging pro Steel Housing Power Supply 9V Adapter or battery powered www.jetcityamplification.com
29
JET DIRECT Always wanted a line out for your guitar amplifier but didn’t want to pay for an expensive mod? The JetDirect is your answer. Put this inconspicuous little “black box” between your head and cabinet and voila! Thanks to Doug Roberts’s emulation circuitry, the XLR line output actually sounds like a mic’d speaker. Eliminate stage mics all together, making the sound-man’s job a little easier or use the line signal as an additional layer for your “wall of sound”.
On/Off Switch Engages/bypasses the pedal
On/Off LED For high visibility on the darkest stage
Aluminum and Strength and durability for the gigging pro Steel Housing
Power Supply 9V Adapter or battery powered
Amplifier Pedals & Boxes 2011
Welcome to Jet City
DESIGN BY
soldano
www.jetcityamplification.com
31
P.O. Box 468 | Redmond, WA 98073 Phone: (425) 698-1296 | Fax: (206) 260-8824 Mon-Fri 8:30AM – 5:00PM PST
[email protected] |
[email protected] [email protected]
