Transcript
Head Office & Showroom: Davy Avenue, Knowlhill Milton Keynes MK5 8HJ United Kingdom Tel: +44 (0)1908 608888 Fax: +44 (0)1908 692399 www.morgana.co.uk
[email protected]
CardXtra Plus Multi function finishing machine. A cut and crease above the rest. The CardXtra Plus has been manufactured to meet the needs of the growing number of digital and litho printers who have asked for a highly accurate, low cost, easy to use multifunctional finishing device. With run lengths becoming shorter and jobs being personalised or printed with no “overs” it is essential to have an accurate, easy to use reliable finishing system. That is exactly what the CardXtra Plus is. Key Product Features • Highly accurate • Cut & crease in one pass • Rule and matrix guaranteed for life • Takes stock up to 0.4mm (approx 400 gsm)* • Fully programmable • Million cut guarantee • 3 cutters as standard • Choice of additional cutters • Image tracking registration mark It can feed sheets up to SRA3 in size and can trim, cut and crease in multiple positions. The accuracy of the new CardXtra Plus is the best available in the market and significantly better than that of many more expensive units. Accuracy of +/- 0.1mm makes the CardXtra Plus between 5 and 7 times more accurate than competitive models and provides a much better investment for your business. The addition of a unique registration mark allows the machine to track the image as opposed to the sheet edge, making it perfect for the digital environment. When producing business cards an average run of 250 cards can be finished in less than 2 minutes. A small job such as this that would previously have needed 18 cuts on a guillotine can now be offered as an “on demand” service. The versatile CardXtra Plus now has the ability to take SRA3 sheets, trim them to A3 and crease them to produce finished A4 4 page brochures. Equally easily it can finish the job to A4 which can then be creased to make 4 page A5 leaflets or multiple creases for a wide variety of applications. The versatile CardXtra Plus has the ability to take many different size sheets as shown opposite, and utilising optional cutters which are easy for the operator to change, produce many different finished jobs. Pre-programmed cut patterns along with the ability to customise and save your own for repeat work. These are accessible from the LCD control panel on the front of the machine.
CardXtra Plus Multi function finishing machine. A cut and crease above the rest.
technical specifications Configuration
Freestanding cabinet with castors
Cutting method
Programmable fixed long blade (paper feed direction) and interchangeable rotary blade unit (paper width direction)
Finished size
A3, A4, A5, A6, Postcard, Business card and adjustable custom sizes
Paper size
A4, SRA4, B4, A3, SRA3 (Max. 320 mm in width)
Thickness (weight)
* From 0.12mm (105gsm) up to 0.40mm (400gsm)
Number of sheets or pages
An SRA3 when cut yields one of the following; 20 x Business cards, 8 x Postcards, 1 x A3 size, or 2 x A4 size
Cutting speed
7 sheets per minute
Maximum creases
16
Paper feed
500 sheets of paper in a single stack (for 0.12mm thick), Air suction paper feed system
Paper output
Natural separation method, up to 650 sheets of paper stacked in each row (for 0.12mm thick)
Dimensions
L 1300mm x W 615mm x H 950 mm
Weight
70kgs
Operating environment
10 - 32°C, or 50 - 89.6°F, 20 to 80% RH (no condensation permitted)
Noise level
65dB or less
Power requirement
220/240v 50/60Hz
Safety regulations
CE Mark (EN 60950 EN55014)
*
Depending on type of stock and imaging device being used. Always check your stocks are suitable prior to purchase. The specification is measured on plain un-imaged stock. Results achieved on imaged stocks may vary.
Standard Product code
Paper size
*Description size and yield
Trim margins on four sides
MC-1 (55mm width)
SRA3, SRA4, SRA3
20 x Business cards, 10 x Business cards, 10 x Double sized business cards
Yes
HC-1 (148mm postcards)
SRA3
8 x Postcards, 8 x A6, 6 x A6, 4 x A5
Yes (Not on 8 x A6)
DC-1 (297mm width)
-
A3 trimmed sheet, 2 x A4 sheet
Yes
OT-2, Output paper tray
For Documents A3, A4, A5
Options Product code
Paper size
*Description size and yield
Trim margins on four sides
MC-2 (55mm width)
SRA3, A3, B4, A4
20 x Business cards, 9 x Business cards, 10 x Business cards (3 patterns)
No
MC-3 (50.8mm width)
SRA3, A3, B4, SRA4
20 x Business cards, 9 x Business cards, 10 x Business cards
Yes
HC-2 (148mm postcards)
A3, A4
8 x Postcards, 4 x Postcards, 8 x A6, 4 x A6, 4 x A5, 2 x A5
No
CS-1 (99mm width)
SRA3
6 x 210mm x 99mm Compliment slips
Yes
*
Free cutting formats (the desired cutting length is set within a present range) and lengthwise cutting (the cutting width depends on the rotary blade unit) are also available in addition to the sizes and numbers listed above.
*Disclaimer As part of our continued product improvement plan, specifications and information published here are subject to change without notice. All specifications are dependent on application, type of stock, temperature, RH and print engine used. Specifications quoted were measured on uncoated and unprinted stock. E & OE. CardXtra Plus data sheet ver 2 - 1/12