Transcript
Device Networking Access
Ethernet Wireless Bridge + 2-port Wireless Serial Server ■ ■
EW5302
RoHS compliant
■
Transparent between Ethernet to Wireless networking
EW5302 Wireless Client Adaptor is a bridge between wireless LAN to
■
Plus 2-serial port for more connectivity
Ethernet and RS-232/485 communications. There are one Ethernet
■
Metal housing and with standard DIN-Rail supported
■
15KV ESD protection for serial ports
■
IEEE 802.11g 54Mbps wireless network connectivity
■
Support UDP, TCP server and client protocols for
port and two Serial ports to connect to IEEE 802.11g/b wireless network. The information transmitted by Wireless Client Adaptor is transparent to both host computers (IP network over wireless LAN) and devices (Ethernet/RS-232/485). Data from the wireless LAN is transmitted to the designated Ethernet/RS-232/485 port and data from
Virtual COM mode and pair connection
Ethernet/RS-232/485 port is transmitted to the Wireless (TCP/IP)
■
Selectable RS-232/422/485 serial mode by software
transparently.
■
Configurable via built-in web server and Windows-based utilities
■
■
Standard 2.4GHz 4dBi antenna or optional high gain
By using EW5302, these devices can be communicated over a wireless network to send or receive information from, e.g., a backend server or database. In the computer integration manufacturing or industrial
antenna
automation area, Wireless Client Adaptor is used for field devices to
Upgradeable firmware via network
direct connect to network. Many control devices provide the ability to communicate with hosts through Ethernet/RS-232/485 however RS-232/485 serial communication has its limitations. For instance, it is hard to transfer data through Wireless or long distance. With EW5302, it is possible to communicate with a remote device in the Intranet environment or even in the Internet and thus, increases the communication distance dramatically. Flexible configuration options enable this unit to be setup remotely over IP network by Web browser, or Window utility. Packed in a rugged DIN Rail mountable case and 9~48V DC power input range, EW5302 is ideal for almost any industrial and manufacturing automation.
Technologies
Ethernet Wireless Bridge + 2-port Wireless Serial Server
EW5302 Ordering Information
Specifications
Ethernet
1P1EW5302WG001G
IEEE802.11g wireless 2-port(DB9*2) software
EW5302-WgN1(DB)
selectable RS-232/422/485(DB9) serial server
Compliance
IEEE802.3
Port
1-port
Transmission Rate
10/100Mbps Auto-detection
1P1EW5302WG002G
IEEE802.11g wireless 2-port(TB5*2) software
Connector
RJ-45
EW5302-WgN1(TB)
selectable RS-232/422/485(TB5) photo isolation
Auto MDI/MDI-X
Yes
With DC-jack lockable power connector
serial server
WLAN Compliance
IEEE802.11g/b
WEP
64-bit / 128-bit data encryption
WPA
WPA/WPA2-PSK compatible ( Supported TKIP / AES encryption )
Modulation
CCK, DQPSK, DBPSK, OFDM ( 11g )
Tx Power
11b: 15dBm / 11g: 14dBm
Rx Sensitivity
-66dBm@54Mbps / -80dBm@11Mbps
Transmission Rate
54Mbps ( max. ) with auto fallback
Transmission Distance
Up to 300 meters ( @12Mbps in open areas )
Topologies
Infrastructure, Ad-Hoc
Antenna connector
Reverse SMA
Link Mode TCP Server
Up to 4 connections or Virtual Com mode
TCP Client
Up to 2 destinations
UDP
Up to 4 destinations
Others
Ethernet to WLAN Store and Forward
Serial Interface
RS-232/422/485 software selectable
Ports
2-port(DB9) / 2-port(TB5)
Baud Rate
110bps~921Kbps
Parity
None, Odd, Even, Mark, Space
Data Bits
5, 6, 7, 8
Stop Bits
1, 2
Flow Control
None, Software: Xon/Xoff, Hardware: RTS/CTS
Connector
9-pin D-Sub(EW5302-WgN1(DB)) 5-pin terminal block(EW5302-WgN1(TB))
Protection
15KV ESD
Power Input
DC 9~48V
Consumption
Max. 4.5 W (Tx Mode)
Environment Operating
0°C ~ 65°C ( 32º ~ 149ºF )
Storage
-40º ~ 85ºC ( -40º~ 185ºF ), 5 ~ 95%RH
Dimension WxHxD
45mm x 91mm x 80mm
Software Configuration
Web Page / Telnet / Serial console / Windows utility
Virtual Com / DeviceView
Windows & Linux port redirection software
/ Serial Manager Support Protocol
ICMP, TCP(UDP) / IP, DHCP client, DNS, SNMP, NTP, SMTP, HTTP, Telnet
Optional Accessories Antenna
HG055: 5.5dBi reverse SMA connector with 180cm cable HG090: 9dBi reverse SMA connector with 150cm cable
RF Cable
HG-C150AN: SMA(R) to N-male 150cm cable HG-C600N: N-male to N-female 600cm cable
Power Adapter
UV315-12(US/EU): AC100~240V/DC12V 1.25A DC Jack lockable (EW5302-WgN1(DB)) US315-12(US/EU): AC100~240V/DC12V 5.08mm pitch Terminal block (EW5302-WgN1(TB))
Atop Technologies, Inc. TEL：+886-3-5508137 FAX：+886-3-5508131
[email protected] http://www.atop.com.tw Design and specification are subjected to change without notice. All product names referenced herein are registered trademarks of their respective companies.
CA_EW5302_E：v3-110120
