Transcript
USB to Dual port RS-232 Adapter The USB to 2-port RS-232 adapter, is a low-cost, high-performance device. It operates as a bridge and provides single and easy connection between one USB port and two serial ports. Each serial port can be independently configured into various synchronous and asynchronous interfaces. Users can have the option to operate multiple devices at the same time. This product is designed to accommodate those peripherals with serial-port, like cellular phone, digital camera, modem, mouse, PDA, GPS, ISDN terminal adapter, etc.
Feature
Full compliance with the USB Specification 1.1 & 2.0 Over 230kbps transfer rate Supports automatic handshake mode Windows : 98 / Me / 2000 / XP / Vista / 7 / 8 / 2003 / 2008R2, WinCE : V4.2~ V7.0, Mac OS : 8.x / 9.x / 10.x & Linux : Kernel 1.5.0 or above The system is equipped with USB Host Controller
Specification Model
UMC-102
Chips
FTDI
Interface
RS-232
Compliant Connector
USB Spec.1.1 Upstream
USB Type A Male
Device
DB-9 Pin Male x 2
Power Mode
Bus
Cable Length
0.6M
Housing
Plastic
* Note: Each time a device is connected to a DB-9, Reset Buttons must be press for recognition.
