Transcript
EDAM-8530
Isolated USB To RS-232/RS-422/RS-485 Converter
Features Automatically Switch USB Signal To RS-232/RS-422 Or RS-485 Driver Support For Windows 95/98/ME/2000/XP/Vista/7 Power And Activity Indicator For Troubleshooting Auto Switching Baud Rate Up To 115.2 Kbps Reserved Space For Termination Resistors Minimum 3000 VDC Isolation Protection Mounts Easily On Din-Rail Or Panel Full-Duplex RS-232/RS-422 Support RS-232 RTS & CTS Signals Support
Specifications Interface:
Baute Rate (bps) LED Indication Isolation Voltage USB Controller
USB Interface Connector Accessories (Supplied) Plug-In Screw Terminal Wiring Converted Signals
1200, 2400, 4800, 9600, 19.2K, 38.4K, 115.2K LED for Power and TX RX status 3000 VDC USB 1.1 / 2.0 USB type B
Power Requirement : Consumption Power Requirement Humidity
1.2 W/Typical USB bus power 5 ~ 95% RH, non-condensing
NYLON DIN-rail mounting adapteret SECC panel mounting bracket Accepts AWG #12 to #22 (0.5 to 2.5 mm) wires RS-232/RS-422 or RS-485 auto switching
Handshake RS-232 RTS & CTS Isolation Side RS-232/ 422/485 RS-232/RS-422/RS-485 Connector Plug-in screw terminal Isolation Voltage 3000 VDC
Block Diagram eDAM-8530
+5V GND
USB Controller
Isolated Power supply
INLOG
TX+/D+ TX-/D-
Photo-Isolation
Industrial Remote Control Modules
Auto Baud rate Detector
VSS
RS-232 RS-485 RS-422 interface
Protector
Data+ Data-
RX+ RXTX RX RTS CTS F.GND
-48-
