Transcript
EDAM-8520BN
RS-232 To RS-422/RS-485 Converter
Features Power And Data Flow LED Indicator For Troubleshooting Auto Switching For RS-232 To RS-422 Or RS-485 Automatic Direction Flow Control On RS-485 Transient Suppression On RS-485 Data Lines Auto Switching Baud Rate Up To 115.2 Kbps Reserved Space For Termination Resistors Mounts Easily On Din-Rail Or Panel Networking Up to 4000 Feet
Specifications Interface:
Baute Rate (bps) LED Indication Converted Signals
Accessories (Supplied) Plug-In Screw Terminal Wiring RS-232 Interface Connector RS-422/RS-485 Connector
1200, 2400, 4800, 9600, 19.2K, 38.4K, 115.2K LED for Power and TX RX status RS-232 to RS-422 or RS-485 (2 or 4-wire JP1 select) Auto switching NYLON DIN-rail mounting adapter SECC panel mounting bracket Accepts AWG #12 to #22 (0.5 to 2.5 mm) wires
Power Requirement : Consumption Power Input Humidity
1.2 W/Typical +10 ~ +30 VDC 5 ~ 95% RH, non-condensing
Female DB-9 Plug-in screw terminal
Block Diagram eDAM-8520BN
RX
RS-232C Interface
RS-485 RS422 interface
Protector
TX
Auto Baud rate Detector
Power supply
VS
+5V
INLOG
Industrial Remote Control Modules
Data+ Data+ TX+ TXRX+ RX-
GND
-47-
